Table of Contents
Advertisement
DESCRIPTION
Product Overview
The IRRInet-M DC RTU is a remotely located unit used for monitoring and control of local
irrigation equipment. The unit can operate in stand-alone mode, or as an intelligent RTU or
node on a distributed control system. This manual describes both basic and expanded I/O
models.
The IRRInet-M DC RTU is enclosed in an indoor plastic case and is intended for indoor or
outdoor use (either wall or DIN rail mounting.) The installer must make sure that the
installation meets the requirements of the standard and protects the unit from weather hazards.
For outdoor installation, a suitable enclosure (such as UL certified NEMA box) must be
provided. The antenna must be physically secured at a permanent outdoor location.
The IRRInet-M DC RTU main power source is 9-30V DC. The IRRInet-M DC has only one
power source.
Configuration of the IRRInet-M DC RTU is performed using the ACE3600 System Tools Suite
(STS).
Figure 1 provides a general view of the IRRInet-M DC RTU.
Figure 1 IRRInet-M DC RTU –General View with Case
1
Advertisement
Table of Contents
