Table of Contents
Advertisement
If you wish to install the appliance under a worktop or
under a hob, you will need to use the following dimen-
sions:
Dimensions in mm
No hob
Induction hob
Full-surface induction hob
Gas hob
Electric hob
a: Recommended worktop thickness according to the
hob installation instructions.
b: Required distance between the hob and the vacuum-
ing drawer.
c: Required distance between the bottom of the vacu-
uming drawer and the bottom of the worktop.
Note: Observe the installation instructions for the hob.
15.4 Safe installation
Follow these safety instructions when in-
stalling the appliance.
WARNING ‒ Risk of suffocation!
Children may put packaging material over
their heads or wrap themselves up in it and
suffocate.
▶ Keep packaging material away from chil-
dren.
▶ Do not let children play with packaging ma-
terial.
WARNING ‒ Risk of electric shock!
If the insulation of the power cord is dam-
aged, this is dangerous.
▶ Never let the power cord come into contact
with hot appliance parts or heat sources.
▶ Never let the power cord come into contact
with sharp points or edges.
▶ Never kink, crush or modify the power
cord.
a: Surface-mounted or
flush-mounted
30/30
40/40
20/30
30/30
b
5
5
2
5
15.5 Instructions for the electrical
connection
In order to safely connect the appliance to the elec-
trical system, follow these instructions.
¡ The appliance must only be connected to a protect-
ive contact socket that has been correctly installed.
Only a qualified electrician may install a socket or
replace the connecting cable, taking the appropriate
regulations into account.
¡ The appliance must only be connected with the
power cable provided. Connect the power cable to
the back of the appliance.
¡ Connecting cables with various plug types are avail-
able from after-sales service.
¡ No multi-plugs, multiple connectors or extension
leads must be used. Overloading causes a risk of
fire.
¡ If the plug can no longer be reached after the in-
stallation, a partition must be provided in the phases
in the permanent electrical installation in accord-
ance with the installation regulations.
15.6 Tools
You require the following tools for the installation.
¡ Measuring tape
¡ Calliper
¡ Pencil
¡ Angle bracket
¡ Torx 20 screwdriver
¡ Large flat-tipped screwdriver
¡ Combination pliers
15.7 Installation
Preparing the appliance
A pump that contains oil is installed in the appliance. If
the incline is too great, this oil may flow out of the
pump. Do not tip the appliance or upend it.
Installation instructions en
c: Surface-mounted or
flush-mounted
160
200/201
210/211
190/193
190/197
15
Advertisement
Table of Contents
