Fan Tray Controller Leds - Juniper PTX10004 Hardware Manual

Table 12: Fan Tray LEDs on a PTX10004 (continued)
Name
SIB Status (SIB 4 status)
SIB Status (SIB 5 status)

Fan Tray Controller LEDs

The fan tray controller LEDs are visible only when the associated fan tray is removed. The fan tray controller
LEDs are located on the right of the controller panel.
on the JNP10004-FTC2 fan tray controller faceplate.
Color State
Green On steadily
Amber Blinking
Amber Blipping
None Off
Green On steadily
Amber Blinking
Amber Blipping
None Off
Description
The center SIB behind the right fan tray is
online.
An error has been detected in SIB 4.
Replace the SIB as soon as possible. The
SIB is located behind the right fan tray and
is the middle SIB in the group of 3. To
maintain proper airflow through the
chassis, leave the fan tray installed in the
chassis until you are ready to replace the
SIB.
Beacon is enabled.
The SIB is offline.
The right-most SIB behind the right fan
tray is online.
An error has been detected in SIB 5.
Replace the SIB as soon as possible. The
SIB is located behind the right fan tray and
is the right-most SIB in the group of 3. To
maintain proper airflow through the
chassis, leave the fan tray installed in the
chassis until you are ready to replace the
SIB.
Beacon is enabled.
The SIB is offline.
Figure 18 on page 53 shows the location of the LEDs
52