Related Manuals for Xiaomi Lydsto W2
Summary of Contents for Xiaomi Lydsto W2
- Page 1 Lydsto Self Cleaning Sweeping Robot W� Operating Manual Please read this manual carefully before using the product and keep it properly...
-
Page 3: Safety Precautions
Catalog Safety precautions Warning � Attention � Product introduction Main machine � Dust Box � Multi-functional cleaning base station � Usage of product � Application installation and use App connection � Operating instructions for switching on and off and cleaning �... - Page 4 Product parameter �� Product Hazardous Substances Declaration �� Warranty Statement �� Warranty content �� �� Product performance fault set of sweeping and mopping robot Warranty card for sweeping robot products �� Maintenance records of sweeping robot products ��...
- Page 5 Safety precautions Please read the manual before use Warning: In order to avoid injury and unnecessary property loss to you and others, please read carefully and follow the following "safety precautions" before use. This section describes security precautions in two aspects: Warning and Caution. "Warning" and "Caution" are important contents for safe use and must be observed.
- Page 6 �. Clean the dust on the plug regularly with dry cloth to avoid fire caused by poor insulation; �. Be sure to insert the plug to the end to avoid electric shock, short circuit and fire; �. In case of abnormal fault, please immediately cut off the power supply and stop using it to avoid smoke, fire and electric shock; �.
-
Page 7: Product Introduction
Product introduction Main machine Cover buckle position Dust box take out button Lidar pressure sensor Wall sensor Panel Reset key Dust box Infrared receiving sensor Air outlet function button Charging contact (�) Bumper Infrared window sensor Infrared receiving sensor Suction inlet Carpet detection sensor Universal wheel Function button... -
Page 8: Usage Of Product
Multi-functional cleaning base station Head cover Cleaning brush Function button Dust bag Start/pause Recall Clean water tank Mop cleaning Sewage water tank Automatic dust collection LED display Infrared lens Power port Suction port Guide whee (�) Charging clip (�) Infrared lens (�) Cleaning tray Sewage extraction port Usage of product... - Page 9 Step �: Find a suitable place to place the cleaning base station, Step �: Take out the clean water tank, remove the cover of and ensure that the cleaning base station is placed horizontally; the clean water tank, put the clean water tank after water injection (the water amount is lower than MAX line) back to the cleaning base station, and cover the top cover of the cleaning base station;...
- Page 10 Application installation and use Connect to MIJIA APP Connect to Lydsto APP The product has been connected to MIJIA. It can be controlled by Lydsto APP can be downloaded from Apple APP market MIJIA APP and interconnected with other products. or Google APP market.
- Page 11 Operating instructions for switching on and off and cleaning Area one Area two �.Power on/off Power on: Long press the switch button, switch button indicator light up, the robot into standby state; Shutdown: Long press the switch button, the indicator light slowly extinguished and shutdown; �.
- Page 12 Description of Multi-functional cleaning base station display Power on the cleaning base , the display screen is steady on, if there is no operations with the base or �� seconds, and the screen goes off. Led display Function button Standby Dust bag is not Cleaning plate is Sewage tank is...
- Page 13 Product disassembly and cleaning Please carry out the following cleaning steps in the case of power off! Disassembly and installation of main brush assembly Step �: Main brush disassembly Step �: Main Brush cleaning Turn over the machine, hold the release button of the roller brush box and move Use a cleaning brush to lift and cut off...
- Page 14 Attention �. Please replace the side brush configured by the original factory to ensure the cleaning effect； �. Replace the edge brush with a screwdriver to avoid scratches； �. Due to a sharp blade in clean knife, please keep it our of the touch of children. Disassembly and installation of dust box and filter assembly Step �: Dust box disassembly Step �: Dump the dust box garbage...
- Page 15 Mop disassembly and installation Step �: mop removal Step �: mop cleaning Remove the mop module from the chassis and remove the mop Rinse the mop with clean water and dry it to prevent dust cloth from the mop bracket; clumping and unpleasant smell when it is used again.
- Page 16 Multi-functional cleaning base station cleaning Step �: Dust bag replacement When the dust bag is full, replace the dust bag as prompted by the base station display screen. It is recommended to replace the dust bag every � weeks； Open the base stations cover Pull the dust bag up and The dust bag is inserted into Replace a new dust bag...
-
Page 17: Troubleshooting
Multi-functional cleaning base station parts Step �: Clean the sewage tank Step �: Clean the tray base Open the top cover of the cleaning base station, take out the sewage tank, open Take out the tray base and use a cleaning brush to clean up the the sewage tank to release the buckle, clean the dirt in the water tank with a long dirt, and then install it back to the base station. - Page 18 Please check whether the main brush is entangled with wool, wires and other sundries. Please remove the main brush and clean it Error �: Check whether the main brush is stuck Please check whether there are any tangled objects such as wool and electric wires on the indoor floor and clean them up The main brush is a sticky part that needs to be cleaned regularly Please check whether the side brush is entangled with wool, wire and other sundries.
- Page 19 Error �: Please load the cleaning tray Check whether the cleaning tray is in place or properly installed, and reinstall the cleaning tray Check whether dust bags are installed Error ��: Dust bag not in place, please check If dust bags have been installed, check whether the dust bags are inserted to the bottom Please check that the base station roof is properly closed Error ��: Base station wind pressure is abnormal Please check whether the dust bag is full and replace it in time...
-
Page 20: Basic Parameter
Types of problem Solution Does it need to be recharged for �� hours for Lithium battery has no memory effect,use it when it is full the first three uses During the cleaning, the power is insufficient Ensure that the robot is not in do not disturb mode, which does not continue scanning.Manual charging or and the cleaning is not continued putting robot back to the base station does not continue scanning The robot will regenerate the map after partial cleaning or long-distance position movement. - Page 21 Manufacturer: Guangdong Yimu Technology Co., Ltd. Address: Room 201,Building 1,No.1,Dongsan Lane,Hengjiang,Fushan,Liaobu Town,Dongguan,Guangdong,China Service number: +86-400-077-8387 ��...
-
Page 22: Fcc Statement
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Need help?
Do you have a question about the Lydsto W2 and is the answer not in the manual?
Questions and answers