Dismounting And Mounting Each Cover - Toshiba TVL Series Instruction Manual

2.4

Dismounting and Mounting Each Cover

This paragraph describes the dismounting and mounting of the covers, which are
common to the maintenance and replacement of each unit.
•
When opening the cover, take careful precautions not to allow entry of moisture
or contaminant into the robot. If the power is turned on while moisture or
contaminant is left, you may get an electric shock or the robot may malfunction,
which is very dangerous. If moisture or contaminant has got into the robot,
remove it thoroughly.
•
When mounting the covers, take careful precautions not to catch any cable in it.
If the cable is bent and pushed by force, it will be broken. The cables are
secured to the plates (sheet metal) with cable straps; therefore, it is
recommended to take pictures beforehand so that where to route the cables and
where to use the cable straps are identifiable in restoration work.
•
Run the cables along the original route without any change. Forced bending or
strapping shortens the service life of cables.
!
DANGER
!
CAUTION
20
MAINTENANCE MANUAL
STE 85440