Dismounting And Mounting Each Cover - Toshiba THL Series Instruction Manual

2.3

Dismounting and Mounting Each Cover

This paragraph describes the dismounting and mounting of the covers, which are
common to the maintenance and replacement of each unit.
• When opening the cover, take careful precautions not to allow entry of moisture or
contaminant into the robot. If the power is turned on while moisture or contaminant is left,
you may get an electric shock or the robot may malfunction, which is very dangerous.
• When mounting the arm 2 cover and base cover, take careful precautions not to catch any
cable in it. If the cable is bent and pushed by force, it will be broken. Each cable is
secured to the plate, etc. with cable ties. After the cover is disconnected, make sure of the
cable layout and return the cables to natural wiring state.
!
DANGER
!
CAUTION
26
MAINTENANCE MANUAL
STE 85357