Battery Removal - Lenovo motorola moto g Service Manual

Battery Removal

/// WARNING ///
Failure to adhere to Safety Critical Note(s) may increase
risk of rupture, burning, or failure to function safely when
used by the customer. Refer to the Battery Safety
Guidelines.
1. Use the flat end of the Plastic bar to remove the
foil conductive from the battery.
NOTE
Remove the Foil and Adhesive Sheet only if the foil is
defective or damaged. If the battery will be reused, skip
this step. After you remove the Foil and Adhesive
Sheet, you cannot reuse it.
PAGE 24
// CAUTION //
Handle the Battery Pack with care. If dropped to the floor,
it may be internally damaged and must be scrapped.
Ensure Battery and its insulation are not damaged (e.g.
scratched, dented, punctured) prior to and throughout
assembly.
Prior to assembly, ensure Battery edges and surfaces
are not dented or deformed, and that fixtures and parts
that will contact the Battery are free of foreign material.
Ensure screws and screwdrivers do not contact the
Battery.
01/20/2015
Step 1
Step 2
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola