Table of Contents

Advertisement

Quick Links

Moto G Power
Lenovo Moto G Power
Level 2 – Service and Repair Manual

Advertisement

Table of Contents
loading

Summary of Contents for Lenovo Moto G Power

  • Page 1 Moto G Power Lenovo Moto G Power Level 2 – Service and Repair Manual...
  • Page 2: Revision History

    Lenovo Moto G Power Level 2 – Service and Repair Manual EVISION ISTORY Revision Date Notes 02/10/2020 Initial Release. Lenovo Confidential Restricted: PAGE 2 Do not share without consent from Lenovo...
  • Page 3: Table Of Contents

    Flash Grease Removal ........................43 FPS Conductive Gasket Removal..................... 44 Main PCB Shield Graphite Removal ....................45 Sim Gasket Removal ........................46 Receiver Removal ..........................47 Front-Facing Camera Gasket Removal .................... 48 Lenovo Confidential Restricted: PAGE 3 Do not share without consent from Lenovo...
  • Page 4 Ear Jack Gasket Assembly ....................... 82 Main PCB Assembly ......................... 83 USB Grommet Assembly ........................84 Water Detection Label Assembly ...................... 85 Sub Board Assembly ......................... 86 Main Flex Assembly .......................... 87 Lenovo Confidential Restricted: PAGE 4 Do not share without consent from Lenovo...
  • Page 5 Speaker Box Heat Spreader Assembly ..................111 Battery Cover Adhesive Assembly ....................112 FPS Adhesive Assembly ......................... 114 Battery Cover Assembly ........................115 IMEI Label Assembly ........................119 Sim Tray Assembly ......................... 120 Lenovo Confidential Restricted: PAGE 5 Do not share without consent from Lenovo...
  • Page 6: List Of Tables

    Table 2. Assembly Exploded View Parts List ..................10 ABLE OF IGURES Figure 1. External Views ........................8 9 B F igure 2. Assembly Exploded View ....................10 Lenovo Confidential Restricted: PAGE 6 Do not share without consent from Lenovo...
  • Page 7: Safety Information

    Ensure screws and screwdrivers do not contact the Battery. Failure to adhere to Safety Critical Note(s) may increase risk of rupture, burning, or failure to function safely when used by the customer. Lenovo Confidential Restricted: PAGE 7 Do not share without consent from Lenovo...
  • Page 8: Introduction

    Lenovo Moto G Power Level 2 – Service and Repair Manual NTRODUCTION External Views Figure 1. External Views Lenovo Confidential Restricted: PAGE 8 Do not share without consent from Lenovo...
  • Page 9: Table 1. External Views Parts List

    Volume Key Power Key Flash Lens Camera Lens Camera Ring FPS Bezel Battery Cover Speaker Mesh USB Port Headset Jack Front Case Main Lens Housing Frame Sim Door Lenovo Confidential Restricted: PAGE 9 Do not share without consent from Lenovo...
  • Page 10: Main Exploded Views

    XT2041-6 Main Board 4+64G SSL CON XT2041DL Main Board 4+64G SSL TF XT2041-7 Main Board 4+64G SSL VZW DIECUT_BR_SPKGASKET_SOFIA SOFIA_FCAM_COND_FAB DIECUT_SOFIA_SHIELD_CON_GASKET SOFIA-HEAT_SPREAD_PMU MDL,CAMR,8M,F4H7YCC MDL,CAMR,16M,sofia;after16M;F16E10AF;Q T MDL,CAMR,2M,sofia;after2M;L02AA30;Ofilm SOFIA_NA_GREASE_FLASH FLASH,IN SOFIA_NA SOFIA_NA_FLASH_ADH Lenovo Confidential Restricted: PAGE 10 Do not share without consent from Lenovo...
  • Page 11 ACCY,BAT,BAT 5000mAH KZ50 ATL536580 ATL SOFIA_NA_CAM1_GASKET DIECUT_MOTO_GASKET_SOFIA_NA Vibrator,235Hz,D8xH3.25,L0832F-0012 USB,4+64GB,IN,SOFIA_NA SEAL,MOIS,Rio M,ORING_USB_WORKING_LAKE,S SUB CABLE_SOFIA_NA MAIN CABLE_SOFIA_NA SOFIA_SIM_GASKET SOFIA_NA_BATTERY_ADH FPCA,SOFIA NA,MAIN FPC,27x101mm,2L SOFIA_NA_FPS_SUP_GASKET LBL,WATER, DETECT, 3M 5559, 0.127T, VZ FLASH_LENS_SOFIA_NA Lenovo Confidential Restricted: PAGE 11 Do not share without consent from Lenovo...
  • Page 12 Lenovo Moto G Power Level 2 – Service and Repair Manual Reference # Description Recovery Part SOFIA_EAR JACK_Gasket DICUT,WATERPROOF,Waterproof LBL TMO FPCA,SOFIA+,5G ANT,11X10mm,2L Lenovo Confidential Restricted: PAGE 12 Do not share without consent from Lenovo...
  • Page 13: Disassembly And Recovery

    Lenovo Moto G Power Level 2 – Service and Repair Manual ISASSEMBLY AND ECOVERY Disassembly and Recovery Map *Shaded parts may be eligible for parts recovery. Lenovo Confidential Restricted: PAGE 13 Do not share without consent from Lenovo...
  • Page 14: Tools Required For Disassembly

    Lenovo Moto G Power Level 2 – Service and Repair Manual Tools Required for Disassembly The following tools are required to disassemble the Moto G Power phone. Description Part # Picture/Drawing Battery Cover/Display Removal Fixture MR-M2-001 Battery Cover Removal Insert...
  • Page 15 Level 2 – Service and Repair Manual Description Part # Picture/Drawing SIM/SD Tray Removal Tool Black Stick Torque Driver Shim 4-00-5L-10000 PH00 Bit Plastic Tweezers ESD Mat Wrist Strap Gloves Lenovo Confidential Restricted: PAGE 15 Do not share without consent from Lenovo...
  • Page 16: Sim Tray Removal

    Use the SIM Tray Removal pin to push into the SIM Tray hole. Press the SIM Tray removal tool to make it pop- out as shown. Use fingers to take out the SIM Tray. Lenovo Confidential Restricted: PAGE 16 Do not share without consent from Lenovo...
  • Page 17: Water Detection Label Inspection

    If the Water Detection Label (WDL) has been activated, the phone’s warranty no longer applies. Inspect the WDL inside the SIM Tray Slot for signs of activation. Use external light if needed. Lenovo Confidential Restricted: PAGE 17 Do not share without consent from Lenovo...
  • Page 18: Imei Label Removal

    Remove the IMEI Label only if necessary. After you remove it, you cannot reuse it. Use the Plastic Tweezer to remove the IMEI Label from the SIM tray. Lenovo Confidential Restricted: PAGE 18 Do not share without consent from Lenovo...
  • Page 19: Battery Cover Removal

    Place the phone on the Heating Plate, with the Battery Cover side down. Wait 10 minutes for the Battery Cover Adhesive to warm up. Lenovo Confidential Restricted: PAGE 19 Do not share without consent from Lenovo...
  • Page 20 Remove the phone from the Heating Plate or the oven. // CAUTION // Wear protective gloves when handling heated phones. NOTE Perform the Battery Cover removal procedure before the phone starts to cool off. Lenovo Confidential Restricted: PAGE 20 Do not share without consent from Lenovo...
  • Page 21 M2-001-041 in relation to the Display Removal Fixture as shown. Place the Insert in the Battery Removal Fixture. Insert the Battery Cover Removal Insert inside the Display Removal Fixture as shown. Lenovo Confidential Restricted: PAGE 21 Do not share without consent from Lenovo...
  • Page 22 Follow preheating steps described on Page 17. Slide the phone into the Battery Removal Fixture as shown. Center the phone in the Fixture. Firmly press the phone into the Insert, face down. Lenovo Confidential Restricted: PAGE 22 Do not share without consent from Lenovo...
  • Page 23 Battery Cover Adhesive along the edges of the phone. // CAUTION // Do not insert the Thin Plastic Spudger more than 10 mm to prevent damaging internal components. Lenovo Confidential Restricted: PAGE 23 Do not share without consent from Lenovo...
  • Page 24 15. After all the suction cups have been released, carefully slide the phone out of the Battery Removal Fixture. 16. Carefully lift the Battery Cover from the Front Housing. Lenovo Confidential Restricted: PAGE 24 Do not share without consent from Lenovo...
  • Page 25 Do not insert the Thin Plastic Spudger more than 10 mm to prevent damaging internal components. Use the Thin Plastic Spudger to loosen or cut the adhesive holding the Battery Cover. Lenovo Confidential Restricted: PAGE 25 Do not share without consent from Lenovo...
  • Page 26 /// WARNING /// Use care not to disconnect the Fingerprint Sensor (FPS) Flex from the Battery Cover when removing the Front Housing. Split the Battery Cover from the phone. Lenovo Confidential Restricted: PAGE 26 Do not share without consent from Lenovo...
  • Page 27: Top Bracket Removal

    The screws cannot be reused after removal. Use the flat end of the Black Stick to lift the Top Bracket from the location as shown. NOTE Be careful with the Fingerprint Sensor Flex. Lenovo Confidential Restricted: PAGE 27 Do not share without consent from Lenovo...
  • Page 28: Water Detection Label Inspection

    If the Water Detection Label (WDL) has been activated, the phone’s warranty no longer applies. Inspect the WDL, which is visible on the Main PCB. Examine it for signs of activation. Lenovo Confidential Restricted: PAGE 28 Do not share without consent from Lenovo...
  • Page 29: Rear-Facing Camera Lens Removal

    Facing Camera Lens from the location as shown. Use the pointed end of the Black Stick to carefully disengage and push out the Rear- Facing Camera Lens from the location as shown. Lenovo Confidential Restricted: PAGE 29 Do not share without consent from Lenovo...
  • Page 30: Flash Lens Removal

    Flash Board from the location as shown. Use the pointed end of the Black Stick to carefully disengage and push out the Flash Lens from the location as shown. Lenovo Confidential Restricted: PAGE 30 Do not share without consent from Lenovo...
  • Page 31: Top Bracket Heat Spreader Removal

    After you remove the Top Bracket Heat Spreader, you cannot reuse it. Use the Plastic Tweezer to remove the Top Bracket Heat Spreader from the location as shown. Lenovo Confidential Restricted: PAGE 31 Do not share without consent from Lenovo...
  • Page 32: Receiver Conductive Gasket Removal

    Receiver Conductive Gasket Removal NOTE After you remove the Receiver Conductive Gasket, you cannot reuse Use the Plastic Tweezer to remove the Receiver Conductive Gasket from the location as shown. Lenovo Confidential Restricted: PAGE 32 Do not share without consent from Lenovo...
  • Page 33: 5G Flex Removal

    5G Flex Removal NOTE After you remove the 5G Flex, you cannot reuse it. Use the Plastic Tweezer to remove the 5G Flex from the location as shown. Lenovo Confidential Restricted: PAGE 33 Do not share without consent from Lenovo...
  • Page 34: Fps Flex Removal

    FPS Flex Removal NOTE The FPS Flex can be recovered and reused after removal. Use the Plastic Tweezer to remove the FPS Flex from the Main PCB as shown. Lenovo Confidential Restricted: PAGE 34 Do not share without consent from Lenovo...
  • Page 35: Main Pcb Heat Spreader Removal

    After you remove the Main PCB Heat Spreader, you cannot reuse it. Use the Plastic Tweezer to remove the Main PCB Heat Spreader from the Main PCB as shown. Lenovo Confidential Restricted: PAGE 35 Do not share without consent from Lenovo...
  • Page 36: Rear-Facing Camera Removal

    Use the flat end of the Black Stick to disengage the Rear-Facing Camera Flex from the location as shown. Use the flat end of the Black Stick to disengage the Rear-Facing Camera Flex from the location as shown. Lenovo Confidential Restricted: PAGE 36 Do not share without consent from Lenovo...
  • Page 37: Main Pcb Removal

    Display BtB Connector from the Main PCB as shown. Use the flat end of the Black Stick to gently disengage the Battery BtB Connector from the Main PCB as shown. Lenovo Confidential Restricted: PAGE 37 Do not share without consent from Lenovo...
  • Page 38 /// WARNING /// The screw cannot be reused after removal. Use the flat end of the Black Stick to lift the Main PCB from the location as shown. Lenovo Confidential Restricted: PAGE 38 Do not share without consent from Lenovo...
  • Page 39: Water Detection Label Inspection

    If the Water Detection Label (WDL) has been activated, the phone’s warranty no longer applies. Inspect the WDL, which is visible on the Front- Housing. Examine it for signs of activation. Lenovo Confidential Restricted: PAGE 39 Do not share without consent from Lenovo...
  • Page 40: Front-Facing Camera Copper Foil Removal

    After you remove the Front-Facing Camera Copper Foil, you cannot reuse Use the Plastic Tweezer to remove the Front-Facing Camera Copper Foil from the Main PCB as shown. Lenovo Confidential Restricted: PAGE 40 Do not share without consent from Lenovo...
  • Page 41: Front-Facing Camera Removal

    The Front-Facing Camera can be recovered and reused after removal. Use the flat end of the Black Stick to gently remove the Front-Facing Camera from the location as shown. Lenovo Confidential Restricted: PAGE 41 Do not share without consent from Lenovo...
  • Page 42: Speaker Seal Gasket Removal

    Speaker Seal Gasket Removal NOTE After you remove the Speaker Seal Gasket, you cannot reuse it. Use the Plastic Tweezer to remove the Speaker Seal Gasket from the location as shown. Lenovo Confidential Restricted: PAGE 42 Do not share without consent from Lenovo...
  • Page 43: Flash Grease Removal

    Flash Grease Removal NOTE After you remove the Flash Grease, you cannot reuse it. Use the Plastic Tweezer to remove the Flash Grease from the Main PCB as shown. Lenovo Confidential Restricted: PAGE 43 Do not share without consent from Lenovo...
  • Page 44: Fps Conductive Gasket Removal

    FPS Conductive Gasket Removal NOTE After you remove the FPS Conductive Gasket, you cannot reuse it. Use the Plastic Tweezer to remove the FPS Conductive Gasket from the location as shown. Lenovo Confidential Restricted: PAGE 44 Do not share without consent from Lenovo...
  • Page 45: Main Pcb Shield Graphite Removal

    After you remove the Main PCB Shield Graphite, you cannot reuse it. Use the Plastic Tweezer to remove the Main PCB Shield Graphite from the Main PCB as shown. Lenovo Confidential Restricted: PAGE 45 Do not share without consent from Lenovo...
  • Page 46: Sim Gasket Removal

    Sim Gasket Removal NOTE After you remove the Sim Gasket, you cannot reuse it. Use the Plastic Tweezer to remove the Sim Gasket from the Main PCB as shown. Lenovo Confidential Restricted: PAGE 46 Do not share without consent from Lenovo...
  • Page 47: Receiver Removal

    After you remove it, you cannot reuse it. Use the flat end of the Black Stick to lift the Receiver from the location as shown. Remove the Receiver from the phone. Lenovo Confidential Restricted: PAGE 47 Do not share without consent from Lenovo...
  • Page 48: Front-Facing Camera Gasket Removal

    Front-Facing Camera Gasket Removal NOTE After you remove the Front-Facing Camera Gasket, you cannot reuse it. Use the Plastic Tweezer to remove the Front-Facing Camera Gasket from the Front-Housing as shown. Lenovo Confidential Restricted: PAGE 48 Do not share without consent from Lenovo...
  • Page 49: Vibrator Gasket Removal

    Vibrator Gasket Removal NOTE After you remove the Vibrator Gasket, you cannot reuse it. Use the Plastic Tweezer to remove the Vibrator Gasket from the Front-Housing as shown. Lenovo Confidential Restricted: PAGE 49 Do not share without consent from Lenovo...
  • Page 50: Vibrator Removal

    Remove the Vibrator only if necessary. After you remove it, you cannot reuse it. Use the pointed end of the Black Stick to gently disengage the Vibrator from the location as shown. Lenovo Confidential Restricted: PAGE 50 Do not share without consent from Lenovo...
  • Page 51: Flash Conductive Gasket Removal

    Flash Conductive Gasket Removal NOTE After you remove the Flash Conductive Gasket, you cannot reuse it. Use the Plastic Tweezer to remove the Flash Conductive Gasket from the Front-Housing as shown. Lenovo Confidential Restricted: PAGE 51 Do not share without consent from Lenovo...
  • Page 52: Speaker Box Heat Spreader Removal

    After you remove the Speaker Box Heat Spreader, you cannot reuse it. Use the Plastic Tweezer to remove the Speaker Box Heat Spreader from the Front-Housing as shown. Lenovo Confidential Restricted: PAGE 52 Do not share without consent from Lenovo...
  • Page 53: Speaker Box Removal

    /// WARNING /// The screws cannot be reused after removal. Use the flat end of the Black Stick to lift the Speaker Box as shown. Lenovo Confidential Restricted: PAGE 53 Do not share without consent from Lenovo...
  • Page 54: Water Detection Label Inspection

    If the Water Detection Label (WDL) has been activated, the phone’s warranty no longer applies. Inspect the WDL, which is visible on the Sub Board. Examine it for signs of activation. Lenovo Confidential Restricted: PAGE 54 Do not share without consent from Lenovo...
  • Page 55: Speaker Gasket Removal

    Speaker Gasket Removal NOTE After you remove the Speaker Gasket, you cannot reuse it. Use the Plastic Tweezer to remove the Speaker Gasket from the Speaker Box as shown. Lenovo Confidential Restricted: PAGE 55 Do not share without consent from Lenovo...
  • Page 56: Sub Board Removal

    Sub Board from the location as shown. Use the flat end of the Black Stick to gently disengage the Main FPC Connector from the location as shown. Lenovo Confidential Restricted: PAGE 56 Do not share without consent from Lenovo...
  • Page 57: Ear Jack Gasket Removal

    Ear Jack Gasket Removal NOTE After you remove the Ear Jack Gasket, you cannot reuse it. Use the Plastic Tweezer to remove the Ear Jack Gasket from the location as shown. Lenovo Confidential Restricted: PAGE 57 Do not share without consent from Lenovo...
  • Page 58: Usb Grommet Removal

    USB Grommet Removal NOTE The USB Grommet can be recovered and reused after removal. Use the Plastic Tweezer to remove the USB Grommet from the Sub Board as shown. Lenovo Confidential Restricted: PAGE 58 Do not share without consent from Lenovo...
  • Page 59: Battery Removal

    Place the phone on the Hot Plate, with the Display side down. Wait 10 minutes for the adhesive to warm up. Lenovo Confidential Restricted: PAGE 59 Do not share without consent from Lenovo...
  • Page 60 Battery. Use the Thin Plastic Spudger to cut the adhesives from the side of the Battery. Use fingers to carefully lift the Battery. Lenovo Confidential Restricted: PAGE 60 Do not share without consent from Lenovo...
  • Page 61: Battery Gasket Removal

    Battery Gasket Removal NOTE After you remove the Battery Gasket, you cannot reuse it. Use the Plastic Tweezer to remove the Battery Gasket from the location as shown. Lenovo Confidential Restricted: PAGE 61 Do not share without consent from Lenovo...
  • Page 62: Coax Cable Removal

    Cable from the pocket on the Coax Cable as shown. Use the Plastic Tweezer to remove the Coax Cable from the pocket on the Coax Cable as shown. Lenovo Confidential Restricted: PAGE 62 Do not share without consent from Lenovo...
  • Page 63: Mic Grommet Removal

    Use the Plastic Tweezer to remove the MIC Grommet from the location as shown. Use the Plastic Tweezer to remove the MIC Grommet from the location as shown. Lenovo Confidential Restricted: PAGE 63 Do not share without consent from Lenovo...
  • Page 64: Main Flex Removal

    Level 2 – Service and Repair Manual Main Flex Removal NOTE After you remove the Main Flex you cannot reuse it. Use fingers to gently peel off the Main Flex as shown. Lenovo Confidential Restricted: PAGE 64 Do not share without consent from Lenovo...
  • Page 65: Parts Refresh

    Lenovo Moto G Power Level 2 – Service and Repair Manual ARTS EFRESH Tools Required for Parts Refresh The following tools are required for parts refresh of the Moto G Power phone. Description Part # Image Plastic Tweezers Black Stick...
  • Page 66: Battery Cover Cleaning

    Use the ISP Alcohol and Cotton Swabs to remove all the adhesives on the Battery Cover as shown. /// CAUTION /// Remove the adhesive carefully to avoid damage to the Battery Cover. Lenovo Confidential Restricted: PAGE 66 Do not share without consent from Lenovo...
  • Page 67: Front Housing Cleaning

    Lenovo Moto G Power Level 2 – Service and Repair Manual Front Housing Cleaning Use the Cotton Swabs with ISP Alcohol to remove all the adhesives from the location as shown. Lenovo Confidential Restricted: PAGE 67 Do not share without consent from Lenovo...
  • Page 68: Top Bracket Cleaning

    Lenovo Moto G Power Level 2 – Service and Repair Manual Top Bracket Cleaning Use the Cotton Swabs with ISP Alcohol to remove all the adhesives from the location as shown. Lenovo Confidential Restricted: PAGE 68 Do not share without consent from Lenovo...
  • Page 69: Assembly

    Lenovo Moto G Power Level 2 – Service and Repair Manual SSEMBLY Assembly Map Lenovo Confidential Restricted: PAGE 69 Do not share without consent from Lenovo...
  • Page 70: Tools Required For Assembly

    The following tools are required to assemble the Moto One Vision phone. Description Part # Picture/Drawing Black Stick Torque Driver PH00 Bit Battery Cover Press 3-00-Z6-10000 Fixture Press 19501980 Manual Roller Plastic Tweezers Tweezers Lenovo Confidential Restricted: PAGE 70 Do not share without consent from Lenovo...
  • Page 71 Lenovo Moto G Power Level 2 – Service and Repair Manual Description Part # Picture/Drawing Gloves or Finger Collets Lenovo Confidential Restricted: PAGE 71 Do not share without consent from Lenovo...
  • Page 72: Sim Gasket Assembly

    XT2041DL Main Board 4+64G SSL TF XT2041-7 Main Board 4+64G SSL VZW SOFIA_SIM_GASKET Use the Plastic Tweezer to place and secure the Sim Gasket on the Main PCB as shown. Lenovo Confidential Restricted: PAGE 72 Do not share without consent from Lenovo...
  • Page 73: Main Pcb Shield Graphite Assembly

    XT2041DL Main Board 4+64G SSL TF XT2041-7 Main Board 4+64G SSL VZW DIECUT_SOFIA_SHIELD_CON_GASKET Use the Plastic Tweezer to place and secure the Main PCB Shield Graphite on the Main PCB as shown. Lenovo Confidential Restricted: PAGE 73 Do not share without consent from Lenovo...
  • Page 74: Flash Grease Assembly

    Use the Plastic Tweezer to place and secure the Flash Grease on the Main PCB as shown. NOTE Do not touch the PMIC area on the Main PCB. Lenovo Confidential Restricted: PAGE 74 Do not share without consent from Lenovo...
  • Page 75: Speaker Seal Gasket Assembly

    XT2041DL Main Board 4+64G SSL TF XT2041-7 Main Board 4+64G SSL VZW DIECUT_BR_SPKGASKET_SOFIA Use the Plastic Tweezer to place and secure the Speaker Seal Gasket on the Main PCB as shown. Lenovo Confidential Restricted: PAGE 75 Do not share without consent from Lenovo...
  • Page 76: Water Detection Label Assembly

    XT2041-7 Main Board 4+64G SSL VZW LBL,WATER, DETECT, 3M 5559, 0.127T, VZ Use the Plastic Tweezer to place and secure the Water Detection Label (WDL) on the Main PCB as shown. Lenovo Confidential Restricted: PAGE 76 Do not share without consent from Lenovo...
  • Page 77: Mic Grommet Assembly

    Use the Plastic Tweezer to place the MIC Grommet on the location as shown. Use the Plastic Tweezer to place the MIC Grommet on the location as shown. Lenovo Confidential Restricted: PAGE 77 Do not share without consent from Lenovo...
  • Page 78: Vibrator Assembly

    Reference # Sofia NA TP LCM ASSY Sofia NA TP LCM ASSY VZW Vibrator,235Hz,D8xH3.25,L0832F-0012 Use the Plastic Tweezer to place and secure the Vibrator on the location as shown. Lenovo Confidential Restricted: PAGE 78 Do not share without consent from Lenovo...
  • Page 79: Vibrator Gasket Assembly

    Sofia NA TP LCM ASSY Sofia NA TP LCM ASSY VZW Vibrator,235Hz,D8xH3.25,L0832F-0012 DIECUT_MOTO_GASKET_SOFIA_NA Use the Plastic Tweezer to place and secure the Vibrator Gasket on the Front-Housing as shown. Lenovo Confidential Restricted: PAGE 79 Do not share without consent from Lenovo...
  • Page 80: Water Detection Label Assembly

    Sofia NA TP LCM ASSY VZW LBL,WATER, DETECT, 3M 5559, 0.127T, VZ Use the Plastic Tweezer to place the Water Detection Label (WDL) on the location as shown. Lenovo Confidential Restricted: PAGE 80 Do not share without consent from Lenovo...
  • Page 81: Flash Conductive Gasket Assembly

    Sofia NA TP LCM ASSY Sofia NA TP LCM ASSY VZW Use the Plastic Tweezer to place and secure the Flash Conductive Gasket on the Front- Housing as shown. Lenovo Confidential Restricted: PAGE 81 Do not share without consent from Lenovo...
  • Page 82: Ear Jack Gasket Assembly

    Level 2 – Service and Repair Manual Ear Jack Gasket Assembly Description Reference # USB,4+64GB,IN,SOFIA_NA SOFIA_EAR JACK_Gasket Use the Plastic Tweezer to place the Ear Jack Gasket on the location as shown. Lenovo Confidential Restricted: PAGE 82 Do not share without consent from Lenovo...
  • Page 83: Main Pcb Assembly

    Use fingers to place the Main PCB on the location as shown. Use the Torque Driver with PH00 Bit to tighten the white screw as shown (0.8±0.1 kgf-cm). Lenovo Confidential Restricted: PAGE 83 Do not share without consent from Lenovo...
  • Page 84: Usb Grommet Assembly

    Level 2 – Service and Repair Manual USB Grommet Assembly Description Reference # USB,4+64GB,IN,SOFIA_NA SEAL,MOIS,Rio M,ORING_USB_WORKING_LAKE,S Use the Plastic Tweezer to place and secure the USB Grommet on the Sub Board as shown. Lenovo Confidential Restricted: PAGE 84 Do not share without consent from Lenovo...
  • Page 85: Water Detection Label Assembly

    Water Detection Label Assembly Description Reference # USB,4+64GB,IN,SOFIA_NA LBL,WATER, DETECT, 3M 5559, 0.127T, VZ Use the Plastic Tweezer to place the Water Detection Label (WDL) on the Sub Board as shown. Lenovo Confidential Restricted: PAGE 85 Do not share without consent from Lenovo...
  • Page 86: Sub Board Assembly

    Flex on the Sub Board as shown. Use fingers to incline the Sub Board to 30 degree and insert the USB on the Sub Board towards Housing hole as shown. Lenovo Confidential Restricted: PAGE 86 Do not share without consent from Lenovo...
  • Page 87: Main Flex Assembly

    Use fingers to carefully place the Main Flex on the phone as shown, sticky side down. NOTE Be sure the yellow markings on the Main Flex is oriented in relation to the Front Housing as shown. Lenovo Confidential Restricted: PAGE 87 Do not share without consent from Lenovo...
  • Page 88 Lenovo Moto G Power Level 2 – Service and Repair Manual Use fingers to place and secure the Display Flex BtB Connector on the Main PCB as shown. Lenovo Confidential Restricted: PAGE 88 Do not share without consent from Lenovo...
  • Page 89: Coax Cable Assembly

    Sub Board and secure the White Coax Cable in the pocket on the recess of the phone. NOTE Make sure the White Coax Cable is placed above the Black Coax Cable. Lenovo Confidential Restricted: PAGE 89 Do not share without consent from Lenovo...
  • Page 90: Battery Gasket Assembly

    Sofia NA TP LCM ASSY Sofia NA TP LCM ASSY VZW SOFIA_NA_CAM1_GASKET Use the Plastic Tweezer to place and secure the Battery Gasket on the location as shown. Lenovo Confidential Restricted: PAGE 90 Do not share without consent from Lenovo...
  • Page 91: Battery Assembly

    Battery are free of foreign material. Ensure screws and screwdrivers do not contact the Battery. Place the Battery Adhesive on the location as shown and peel off the liner. Lenovo Confidential Restricted: PAGE 91 Do not share without consent from Lenovo...
  • Page 92 10 cycles to secure the Battery as shown. NOTE For each cycle roll the Manual Roller from top to bottom of the Battery and vice versa. NOTE Each cycle should last for 3 seconds. Lenovo Confidential Restricted: PAGE 92 Do not share without consent from Lenovo...
  • Page 93: Front-Facing Camera Gasket Assembly

    XT2041DL Main Board 4+64G SSL TF XT2041-7 Main Board 4+64G SSL VZW Use the Plastic Tweezer to place and secure the Front-Facing Camera Gasket on the location as shown. Lenovo Confidential Restricted: PAGE 93 Do not share without consent from Lenovo...
  • Page 94: Front-Facing Camera Assembly

    XT2041DL Main Board 4+64G SSL TF XT2041-7 Main Board 4+64G SSL VZW Use the Plastic Tweezer to place and secure the Front-Facing Camera on the location as shown. Lenovo Confidential Restricted: PAGE 94 Do not share without consent from Lenovo...
  • Page 95: Front-Facing Camera Copper Foil Assembly

    XT2041DL Main Board 4+64G SSL TF XT2041-7 Main Board 4+64G SSL VZW SOFIA_FCAM_COND_FAB Use the Plastic Tweezer to place and secure the Front-Facing Camera Copper Foil on the location as shown. Lenovo Confidential Restricted: PAGE 95 Do not share without consent from Lenovo...
  • Page 96: Receiver Assembly

    Sofia NA TP LCM ASSY Sofia NA TP LCM ASSY VZW AU,SPKR,15x11x2.8mm,7ohm Use the Plastic Tweezer to place the Receiver on the location aligning with the pins as shown. Lenovo Confidential Restricted: PAGE 96 Do not share without consent from Lenovo...
  • Page 97: Rear-Facing Camera Grommet Assembly

    Level 2 – Service and Repair Manual Rear-Facing Camera Grommet Assembly Description Reference # MDL,CAMR,16M,sofia;after16M;F16E10AF;Q T MAIN_CAM_GROMMET_SOFIA_NA Use the Plastic Tweezer to place the Rear- Facing Camera Grommet on the location as shown. Lenovo Confidential Restricted: PAGE 97 Do not share without consent from Lenovo...
  • Page 98: Rear-Facing Camera Assembly

    MDL,CAMR,16M,sofia;after16M;F16E10AF;Q T MDL,CAMR,2M,sofia;after2M;L02AA30;Ofilm Use fingers to place the Rear-Facing Cameras on the Main PCB as shown. Use fingers to place the Rear-Facing Cameras on the Main PCB as shown. Lenovo Confidential Restricted: PAGE 98 Do not share without consent from Lenovo...
  • Page 99: Main Pcb Heat Spreader Assembly

    Sofia NA TP LCM ASSY Sofia NA TP LCM ASSY VZW SOFIA-HEAT_SPREAD_PMU Use the Plastic Tweezer to place and secure the Main PCB Heat Spreader on the Main PCB as shown. Lenovo Confidential Restricted: PAGE 99 Do not share without consent from Lenovo...
  • Page 100: Fps Conductive Gasket Assembly

    Sofia NA TP LCM ASSY Sofia NA TP LCM ASSY VZW SOFIA_FPS_CON_GASKET Use the Plastic Tweezer to place and secure the FPS Conductive Gasket on the location as shown. Lenovo Confidential Restricted: PAGE 100 Do not share without consent from Lenovo...
  • Page 101: Fps Flex Assembly

    Sofia NA TP LCM ASSY Sofia NA TP LCM ASSY VZW FINGERPRINT SCANNER,Vulcan,kerr Use the Plastic Tweezer to place and secure the FPS Flex on the Main PCB as shown. Lenovo Confidential Restricted: PAGE 101 Do not share without consent from Lenovo...
  • Page 102: 5G Flex Assembly

    5G Flex Assembly Description Reference # Sofia NA Rear housing ASSY CS FPCA,SOFIA+,5G ANT,11X10mm,2L Use the Plastic Tweezer to place and secure the 5G Flex on the location as shown. Lenovo Confidential Restricted: PAGE 102 Do not share without consent from Lenovo...
  • Page 103: Flash Lens Assembly

    Flash lens with bracket via two position holes on the location as shown. Use the Plastic Tweezer to place the Flash lens adhesive on the location as shown and peel off the liner. Lenovo Confidential Restricted: PAGE 103 Do not share without consent from Lenovo...
  • Page 104 Lenovo Moto G Power Level 2 – Service and Repair Manual Use the Plastic Tweezer to place and secure the Flash Board on the location as shown. Lenovo Confidential Restricted: PAGE 104 Do not share without consent from Lenovo...
  • Page 105: Rear-Facing Camera Lens Assembly

    Bottom Cam lens adhesive on the location as shown and peel off the liner. Use the Plastic Tweezer to place and secure the Rear-Facing camera lens on the location as shown. Lenovo Confidential Restricted: PAGE 105 Do not share without consent from Lenovo...
  • Page 106: Top Bracket Heat Spreader Assembly

    Description Reference # Sofia NA Rear housing ASSY CS SOFIA-HEAT_SPREAD_TOP_BRACKET Use the Plastic Tweezer to place and secure the Top Bracket Heat Spreader on the location as shown. Lenovo Confidential Restricted: PAGE 106 Do not share without consent from Lenovo...
  • Page 107: Receiver Conductive Gasket Assembly

    Receiver Conductive Gasket Assembly Description Reference # Sofia NA Rear housing ASSY CS DIECUT_SOFIA_PLUS_FLASH_ADH Use the Plastic Tweezer to place and secure the Receiver Conductive Gasket on the location as shown. Lenovo Confidential Restricted: PAGE 107 Do not share without consent from Lenovo...
  • Page 108: Top Bracket Assembly

    Use fingers to place the Top Bracket on the location as shown. Use the Torque Driver with PH00 Bit to tighten the nine screws as shown (0.9±0.1 kgf-cm). Lenovo Confidential Restricted: PAGE 108 Do not share without consent from Lenovo...
  • Page 109: Speaker Gasket Assembly

    Level 2 – Service and Repair Manual Speaker Gasket Assembly Description Reference # Speaker BOX,8ohm,95dB,2.5dB,1W Use the Plastic Tweezer to place and secure the Speaker Gasket on the location as shown. Lenovo Confidential Restricted: PAGE 109 Do not share without consent from Lenovo...
  • Page 110: Speaker Box Assembly

    SCR,M1.4,ENDO, 3.6 Use fingers to place the Speaker Box on the location as shown. Use Torque Driver with PH00 Bit to tighten the five screws as shown (0.9±0.1 kgf-cm). Lenovo Confidential Restricted: PAGE 110 Do not share without consent from Lenovo...
  • Page 111: Speaker Box Heat Spreader Assembly

    Sofia NA TP LCM ASSY Sofia NA TP LCM ASSY VZW Speaker BOX,8ohm,95dB,2.5dB,1W SOFIA-NA_HEAT_SPREAD_BOTTOM_SPK Use the Plastic Tweezer to place and secure the Speaker Box Heat Spreader on the location as shown. Lenovo Confidential Restricted: PAGE 111 Do not share without consent from Lenovo...
  • Page 112: Battery Cover Adhesive Assembly

    00-Z6-10000) as shown. Align the Front-Housing into the fixture as shown. Use fingers to press the edge of the phone to make sure the adhesive is attached to the phone. Lenovo Confidential Restricted: PAGE 112 Do not share without consent from Lenovo...
  • Page 113 Lenovo Moto G Power Level 2 – Service and Repair Manual Take the phone out of the fixture. Lenovo Confidential Restricted: PAGE 113 Do not share without consent from Lenovo...
  • Page 114: Fps Adhesive Assembly

    Reference # Sofia NA TP LCM ASSY Sofia NA TP LCM ASSY VZW DIECUT_SOFIA_FPS_ADH Use fingers to place and secure the FPS adhesive on the location as shown. Lenovo Confidential Restricted: PAGE 114 Do not share without consent from Lenovo...
  • Page 115: Battery Cover Assembly

    Fingerprint adhesive. Place the Front Housing into the bottom fixture as shown and peel off the liner. Attach the fixture to the press as shown. Lenovo Confidential Restricted: PAGE 115 Do not share without consent from Lenovo...
  • Page 116 Put spring into needle before putting cap on the fore end of needle sucker for avoiding needle passing through. Use fingers to press the air bladder of the tool to exhaust the air as shown. Lenovo Confidential Restricted: PAGE 116 Do not share without consent from Lenovo...
  • Page 117 Cover FPS hole before you press the fixture. 11. Press down the handle of the Fixture Press for 5 minutes to secure the Battery Cover firmly on the phone. Lenovo Confidential Restricted: PAGE 117 Do not share without consent from Lenovo...
  • Page 118 Lenovo Moto G Power Level 2 – Service and Repair Manual 12. Release the fixture and take the phone out from the Fixture Press. Lenovo Confidential Restricted: PAGE 118 Do not share without consent from Lenovo...
  • Page 119: Imei Label Assembly

    Level 2 – Service and Repair Manual IMEI Label Assembly Description Reference # SOFIA_NA_SINGLE_SIM_TRAY_ASSY_VULCAN_JEM Use the Plastic Tweezer to place the IMEI Label on the SIM tray as shown. Lenovo Confidential Restricted: PAGE 119 Do not share without consent from Lenovo...
  • Page 120: Sim Tray Assembly

    Sofia NA TP LCM ASSY VZW SOFIA_NA_SINGLE_SIM_TRAY_ASSY_VULCAN_JEM Insert the SIM Tray in the transceiver as shown. Use finger to press the SIM Tray until it secures into the transceiver. Lenovo Confidential Restricted: PAGE 120 Do not share without consent from Lenovo...

Table of Contents