Threading The Upper Thread - Silvercrest SCNM 100 A1 Operating And Safety Instructions Manual

Threading the upper thread

ON
OFF
1
2
3
4
For good sewing results, the threading must be carried out cor-
rectly. Otherwise several problems will occur.
NOTE
The needle threader can be used with home sewing machine
needle sizers from 75/1 1 to 100/16 .
Thread the upper thread:
1. Set the main power switch (26) to the "I ON" position. Lift
the two-step presser foot lever (22).
2. Press the needle up/down position button (4) to bring the
needle and thread take-up lever (1) to highest position.
WARNING!
Turn the main power switch to "0 OFF" position when carrying
out all the operations!
3. Slide the bobbin and the spool pin cap onto the horizontal
spool pin (19). For better sewing quality, choose a spool
pin cap (n) of a suitable size for the thread and attach it
next to the bobbin.
①
Large spool pin cap
②
Small spool pin cap
4. Pull the thread from the spool through the upper thread
guide (20).
Starting up
EN 25