Front Gearcase Lubrication - Polaris RANGER ETX 2015 Owner's Manual

Table of Contents

Advertisement

FRONT GEARCASE LUBRICATION

NOTE
It is important to follow the front gearcase maintenance
intervals described in the Periodic Maintenance Chart.
Regular fluid level inspections should be performed as
well.
The front gearcase fluid level should be checked and
changed in accordance with the maintenance schedule.
• Be sure vehicle is positioned on a level surface when
checking or changing the fluid.
• Check vent hose to be sure it is routed properly and
unobstructed.
Front Gearcase Fluid Level Check
The fill plug is located on the front-right side of the front
gearcase. Access the fill plug from the side of the
vehicle. Maintain the fluid level even with the bottom
threads of the fill plug hole.
1. Position vehicle on a level surface.
2. Open the hood to gain access to the gearcase area.
q
3. Remove the fill plug
and check the fluid level.
4. If fluid level is not even with the bottom threads, add
the recommended fluid as needed. Do not overfill.
5. Reinstall the fill plug and torque to specification.
TORQUE
Front Gearcase Drain / Fill Plug:
10 ft-lbs (14 Nm)
Front Gearcase Fluid Change:
The drain plug is located on the bottom side of the
front gearcase. Access the drain plug through the
skid plate.
q
6. Remove the fill plug
Fluid Level Check").
7. Place a drain pan under the front gearcase drain
w
plug
.
9926806 R03 - 2015 - 2016 RANGER ETX / 570 2-SEAT 2015 - 2016 RANGER 570 CREW Service Manual
© Copyright Polaris Industries Inc.
(refer to "Front Gearcase
8. Remove the drain plug and allow fluid to drain
completely.
9. Clean the drain plug magnetic surface.
10. Reinstall drain plug with a new O-ring and torque to
specification.
11. Add the recommended amount of fluid through the fill
hole. Maintain the fluid level even with the bottom
threads of the fill plug hole.
FLUID CAPACITY
Recommended Front Gearcase Fluid:
Polaris Demand Drive
(PN 2877922) (Quart)
Capacity: 6.7–7.6 oz. (200–225 ml)
12. Reinstall fill plug with a new O-ring and torque to
specification.
TORQUE
Front Gearcase Drain / Fill Plug:
10 ft-lbs (14 Nm)
13. Check for leaks. Dispose of used fluid properly.
MAINTENANCE
2
2.29

Advertisement

Table of Contents
loading

Table of Contents