Names And Functions Of Remote Controller - Hitachi air Home RC-AGU1EA0S Manual

Names and Functions of Remote Controller

■ This remote controller controls the operation and timer setting of the room air conditioner. The operating
range of the remote controller from the indoor unit is 7m. If indoor lighting is used, the range may be
shorter.
Off Mode Sign
Mode Selector Button
Use this button to select the
operation mode. Every time you
press this button, the mode will
(Cool) ➞
change from
(Dry) ➞ (Fan) ➞
(A.Cir) cyclically. ( Page 3 ~ 5)
GoodSleep Button
( Page 13)
FrostWash Button
( Page 8)
Filter Sign Reset Button
( Page 17)
Refresh Button
( Page 10)
On Timer Button
Select the turn ON time.
( Page 6)
Off Timer Button
Select the turn OFF time.
( Page 6)
Power SAFE Button
( Page 11)
Precautions for Use
Do not put the remote controller under direct sunlight and high temperature.
●
Do not drop it on the fl oor, and protect it from water.
●
If you press the FUNCTON button during operation, the air conditioner may stop for about 3 minutes
●
for protection before you can start it again.
Signal Transmission
– 2 –
Invalid Operation Sign
Shown at invalid setting or operation
Transmission Sign
The transmission sign blinks
when a signal has been sent.
On/Off Button
Press this button to start
operation.
Press it again to stop operation.
( Page 3)
FAN SPEED Button
Select the fan speed.
( Page 3)
Powerful Button
( Page 7)
SILENT Button ( Page 12)
TEMPERATURE Button
Room temperature setting.
Value will change quicker when
you keep pressing.
( Page 3)
RESET Button
( Page 17)
UP/DOWN Button
Controls the angle of the
horizontal air defl ector.
( Page 14)
Left/Right Button
( Page 14)