Hitachi air Home RC-AGU1EA0S Manual page 15

Initialization of the Built-in airCloud Home Module
You can reset the internal settings (restore the factory settings) by remote controller.
This operation is valid only for indoor unit with Built-in airCloud Home module.
It is invalid when in use with Adapter WiFi module.
■ How to restore factory setting
Please make this setting with the remote control in off mode.
Press (Mode) button and
●
seconds together.
LCD will display "
●
then it will display normal screen.
Make sure " " Lamp on the indoor unit fl ash 4 times repeatedly
●
for about 20 seconds.
Restart the unit & check "
●
that unit enters into pairing mode & restoring factory setting is
succeeded.
NOTE
Please note that the confi guration will be cleared and pairing
●
procedure will be required to do again to use the built-in airCloud
Home module.
Please refer separate operation manual available for more
●
information related Built-in airCloud Home Module.
"Wi-Fi" is a trademark or registered trademark of the "Wi-Fi" Alliance".
– 15 –
(On Timer) button 3
" on Temperature segment for 3 seconds
" Lamp blinks 3 times. This ensures