Washing And Drying; Prepare The Laundry; Loading The Washer-Dryer; Selecting A Programme - Miele WTD 160 Operating Instructions Manual

Washing and drying in one
continuous sequence
It is advisable to wash and dry in a
continuous sequence when the
amount of laundry to be washed does
not exceed the amount to be dried
and the amount to be dried does not
exceed the permitted dry weight for
the programme.
It is very important to read the
sections "Separate washing" and
"Separate drying" before proceeding.

1. Prepare the laundry

 Empty all pockets.
 Sort the laundry according to colour
and type of fibre/weave.
 Check the symbols on the care
labels.

2. Loading the washer-dryer

 Open the door.
Check the drum for pets or foreign
objects before loading it with
laundry.
 Unfold the laundry and load loosely
into the drum.
Detergent dispensing aids, e.g.
plastic dispenser balls, can melt
during the drying programme and
cause damage to the washer-dryer
and the laundry.
These dispensing aids must be
removed from the laundry before
drying.
 Close the door.

WASHING AND DRYING

3. Selecting a programme

 Turn the programme selector and
select the required programme.
The control field lights up.
 Touch the Washing and Drying sensor
control until both sensor controls are
brightly lit up.
4. Selecting programme
settings
 Select the desired spin speed,
temperature and drying level.
The sensor controls for the selected
settings light up brightly.
The minimum spin speed cannot be
lower than 900 rpm.
For some programmes the spin speed
cannot be changed.
 Select further extra options as
required.
With the thermospin, the spin speed
displayed for the wash cycle is used.
 Select a delay start time if required.
47