Table of Contents
Advertisement
Available languages
Available languages
CLE ANING AND MAINTENANCE
CARE INSTRUCTIONS
With time and use, the performance of the Hydro Cell de-
creases and scale builds up inside the AIROSWISS U700.
Stagnant water can also impair cleanliness and lead to
unpleasant odors. This means regular maintenance and
cleaning is necessary to ensure clean and unimpaired
operation.
Recommended cleaning and maintenance intervals vary
depending on air and water quality, and length of opera-
tion.
Use a soft, damp cloth to clean the exterior.
Always unplug the unit from the power outlet before
cleaning.
Interval
Daily
After 1 week without operation
Every 2 weeks
Every 2 months
Task
Check the water level; add water if necessary
Empty and clean the AIROSWISS U700
Clean the water base and the water tank
Replace the Hydro Cell
17
en
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the U700 and is the answer not in the manual?
Questions and answers
I don’t see a troubleshooting section in the instruction book for the U700. The float mechanism is working and the base is full of water but the panel continues to indicate no water. Is there something I need to do like a system reset?
To reset the Air-O-Swiss U700 when the panel indicates no water despite the float mechanism working and the base being full, try the following steps:
1. Turn off the unit and unplug it from the power outlet.
2. Empty and refill the water tank to ensure proper seating and eliminate air locks.
3. Check and clean the water sensor and float mechanism to remove any buildup or blockage.
4. Plug the unit back in and restart it.
If the issue continues, descaling the unit may help, as limescale can interfere with sensors. Use the descaling function with EZcal following the manual’s instructions.
This answer is automatically generated