Air-O-Swiss 7135 Quick Setup Manual

PLEASE READ FIRST
1
Finding the ideal location for your
unit: Do not place the humidifier
directly next to a heating or vent.
SOAK CARTRIDGE 24 HOURS BEFORE FIRST USE
5
24 h
FILL THE TANK WITH FRESH COLD WATER
6
Take off the water tank cap to fill
the tank with water. Caution: the
mist outlet is loose!
QUICK OPERATION DESCRIPTION 7135
J K I H G L M
F E D C B A
WATER QUALITY MAINTENANCE WITH HYDRO CELL
Water Quality Maintenance
The Hydro Cell keeps humidifiers operating at their highest level between
recommended cleanings*. Good for approximately one to two months,
depending on the water quality, the Hydro Cell ensures the humidifier's
functionality while providing fresh humidification performance.
* Refer to the user manual for proper cleaning instructions.
Please read the manual or check our website www.airoswiss.net for further information.
QUICK SET UP GUIDE 7135
2
4ft
1ft
3ft
The unit should be placed in an
elevated position, e.g. on a table,
chest, etc. at least 3 ft off the floor.
Keep it away from doors or win-
dows.
Soak the demineralization cartridge in a water bath for 24 hours before the
first use; the granules have to absorb water to reach maximum performance.
WARNING! If the cartridge is soaked in the tank, make sure to exchange the water and empty
the water from the base before using the humidifier.
7
Fill the tank with clean, cold water
from the tap.
A On/Off Button
B Hygrostat
(setting the humidity level)
C Timer
D Mist output
(regulating mist output)
E Operation with pre-heating
(warm mist)
F
Automatic mode and Sleep mode
G Timer indicator
(1–9h or CO)
DO NOT DISCARD! Save for future reference.
3
The mist outlet must not be pointed
directly at plants or other objects.
Keep a distance of at least 20 in-
ches (50cm).
8
Do not pour water into the mist
outlet of the appliance.
4
WARNING! Do not remove the
water tank during operation! Switch
off the unit first. Place the Hydro
Cell in the water tank of the unit.
9
Close the cap of the water tank
securely, place the water tank onto
the base. The water is now running
from the tank into the base. The
red empty indicator light may stay
illuminated for some seconds until
the base is filled with water.
H Mist output indicator
(LO/ME/HI)
I Pre-heating indicator
J Automatic mode indicator
K Sleep mode indicator
L
Empty indicator
M Cleaning indicator
10
Insert the plug into the socket and
switch on the appliance using the
On/Off button.