Clean And Maintenance - Philips ADD5980M User Manual

Note
• Pressing any button during dispensing can stop the cycle. Once the cycle has stopped it
cannot be continued. A new cycle must be started.
• The appliance will automatically go to sleep mode if no operation within 1 minute. Touch
any button can wake up the appliance.
• The total ltered (not chilled) capacity for this appliance is 1.4L as long as both the inner
water tank and the water tank are kept topped up.

5. Clean and maintenance

First time cleaning
1. Preparing the lter cartridge
• Remove the packaging. It is common that its surface may have some carbon powder, this
is normal. These particles are harmless and are washed o during the preparation process.
• Soak the lter cartridge in clean water for 15 minutes. Shake the lter cartridge slightly to
wash the carbon powder on the surface.
1
2. Preparing the appliance
• Remove the inner water tank.
• Ensure the seal ring is installed correctly.
• Press the lter cartridge into the the inner water tank. Ensure it is rmly secure. (B-1)
• Reinsert the inner water tank into the water tank.
• Attach the power cord to the socket at the base of the appliance. (B-2)
• Fill the water tank with 2L of cold tap water and re t the water tank into the appliance.
• Place drip tray and drip tray plate on the front of the appliance. (B-3)
• Place a jug or vessel under the dispense outlet.
• Plug the power cord into the mains socket and turn on.
2
EN 29