Operation Introduction; Battery Charging Function Introduction - Riden RD6006 Instructions Manual

Traditional Style
At main page you can press
Style, Detail Style and Curve Style, the display style will not be saved automatically, you need to set
default Home Style at section
1.4.2

Operation Introduction

In the menu operation, the icon in red or cursor is the currently selected menu, press
to confirm or enter, press the encoder potentiometer to cancel or return, press the direction button
to move the cursor or switch menu, rotate the encoder potentiometer to change the setting, the
settings will be automatically saved when returning from the menu page.
button and power on to restore the factory settings, press and hold the
to restore the factory calibration value, press and hold
mode.

1.4.2.1 Battery Charging Function Introduction

Battery charging operation video：
https://drive.google.com/drive/folders/1g8v_l1X9uwRM1P4GPwKhnP4NopKIUm1s?usp=
sharing
After power on, at battery related information display area, external temperature, capacity and
energy will loop display. When the output is turned on: capacity, energy will be automatically
accumulated, and automatically cleared after power off.
The green terminal is connected to the positive electrode of the battery, and the black terminal
is connected to the negative electrode of the battery. After the battery is correctly connected, the
battery charging indicator turns red
the battery charging indicator turns green
Detail Style
button to change the display style between Traditional
1.4.2.6 Main Page Style Setting.
and the battery is connected. Press
. When the actual output current is lower than cut
39
Curve Style
Press and hold the
button and power on
and power on to enter the boot
to start charging,