Xiaomi G9 Plus User Manual
  1. Manuals
  2. Brands
  3. Xiaomi Manuals
  4. Vacuum Cleaner
  5. G9 Plus
  6. User manual

Xiaomi G9 Plus User Manual

Hide thumbs Also See for G9 Plus:

Advertisement

Table of Contents

Vacuum Cleaner G9 Plus User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G9 Plus and is the answer not in the manual?

Questions and answers

Related Manuals for Xiaomi G9 Plus

Summary of Contents for Xiaomi G9 Plus

  • Page 1 Vacuum Cleaner G9 Plus User Manual...

  • Page 2: Safety Instructions

    Safety Instructions This product is for household use only. Read this manual carefully before use, and retain it for future reference. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  • Page 3 Keep hair, loose clothing, fingers, and other parts of the body away from the vacuum cleaner's openings and moving parts. Do not point the suction opening, extension rod, or other accessories at your eyes or ears or put them in your mouth. Do not put any object into the vacuum cleaner's openings, nor use the vacuum cleaner with any opening blocked.

  • Page 4: Product Overview

    Product Overview Accessories List High Torque Brush Bar Mini Electric Brush Storage Mount (includes screw × 2, wall plug × 2, and mounting template sticker) 2-in-1 Crevice Nozzle Extension Rod Charger Note: Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements.

  • Page 5: Component Name

    Component Name Battery Status Indicator Charging Port Power Button Dust Compartment Press: Turn on Release Switch Release: Turn off Suction Level Switch High Power Battery Release Button Standard Dust Compartment Dust Compartment Bottom Cover Release Button...

  • Page 6: How To Install

    How to Install Installing the Accessories onto the Vacuum Cleaner Insert until it clicks into place Note: Mini electric brush should not be used with the extension rod.

  • Page 7: Battery Status Indicator

    Charging Installing the Storage Mount Battery Status Indicator 1. Paste the mounting template sticker on the wall. Make sure that the bottom Note: means off, means on, and means blinking. edge of the sticker is parallel to and about 107 cm from the ground. Low battery Nearly full 2.

  • Page 8: How To Use

    How to Use Using Different Accessories 2-in-1 Crevice Nozzle: Suitable for vacuuming hard-to-reach places, such as High Torque Brush Bar: For cleaning Storage Mount: The vacuum cleaner corners of doors, windows, walls, and stairs, as well as sofas and table surfaces. different types of flooring such as can be placed on the storage mount wood, marble, tile, and carpet.

  • Page 9: Care And Maintenance

    Care & Maintenance Maintenance Precautions Cleaning the Dust Compartment, Pre-filter, and Cyclone Assembly Always use genuine parts to keep your warranty from being voided. 1. The vacuum cleaner's cleaning ability will be reduced if the dust If the filter, extension rod, or high torque brush bar becomes clogged, the compartment is filled to the "MAX"...
  • Page 10 2. Press the dust compartment bottom cover release button, then empty the 3. Pull the dust compartment release switch in the direction illustrated in contents. image , then remove the dust compartment from the vacuum cleaner as illustrated in image Dust Compartment Release Switch...
  • Page 11 4. Remove the pre-filter first, then lift the handle of the cyclone assembly 5. Rinse the pre-filter, cyclone assembly, and dust compartment with water and turn to counterclockwise until it stops, then pull to lift out the cyclone until they are clean, then set each component aside to thoroughly dry for at assembly.
  • Page 12 Installing the Dust Compartment, Pre-filter, and Cyclone 6. Wipe the contact points of the vacuum cleaner with a soft dry cloth if they are dirty. Assembly Notes: 1. Insert the cyclone assembly vertically into the dust compartment, and make sure that the handle of the cyclone assembly line up with the slot on the left Do not use detergents, polishes, or air fresheners to clean the dust side of the dust compartment.

  • Page 13: Cleaning The Filter

    Cleaning the Filter 3. Slightly tilt the dust compartment so its slot aligns with the clip on the vacuum cleaner. Then gently push the dust compartment until it clicks into place. 1. Remove the dust compartment as shown in the figure. Insert until it clicks into place Dust Compartment Release Switch...

  • Page 14: Installing The Filter

    2. Remove the filter from the vacuum cleaner by pulling it down in the direction 4. Allow the filter to thoroughly dry for at least 24 hours. shown in the figure. Installing the Filter 3. Clean the filter with clean water. Make sure you rotate the filter 360° to thoroughly remove all dust caught in the filter.
  • Page 15 Cleaning the High Torque Brush Bar 2. Reinstall the dust compartment. 1. Turn the lock counterclockwise until it stops, then remove the roller brush from the high torque brush bar. 2. Use scissors to cut and pick out any hair or other debris tangled around the roller brush.
  • Page 16 Cleaning the Mini Electric Brush 3. After extended use, the roller brush may become dirty and should be washed. After washing, allow the roller brush to dry thoroughly by standing it upright 1. Use a proper tool to turn the lock counterclockwise until you hear a click. in a well-ventilated area for at least 24 hours.

  • Page 17: Battery Pack

    Battery Pack 3. After washing, allow the roller brush to dry thoroughly by standing it upright in a well-ventilated area for at least 24 hours. The vacuum cleaner contains a removable rechargeable lithium-ion battery pack which has a limited number of recharge cycles. After extended use, the battery pack may no longer hold a charge.

  • Page 18: Specifications

    Specifications Cordless Vacuum Cleaner Model B206 Rated Voltage 25.2 V 2500 mAh (Nominal Capacity) Charging Voltage 30.8 V Battery Capacity 2400 mAh (Rated Capacity) Rated Power 400 W Dust Compartment Capacity 0.6 L Charging Time Approx. 3.5 hours Net Weight 3.4 kg Item Dimensions 1286 ×...

  • Page 19: Regulatory Compliance Information

    Regulatory Compliance Information EU Declaration of Conformity We Dreame (Tianjin) Information Technology Co., Ltd., hereby, declare that this equipment is in compliance with the applicable Directives and European Norms, and amendments. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html For detailed e-manual, please go to www.mi.com/global/service/userguide WEEE Information...

  • Page 20: Troubleshooting

    Troubleshooting Issue Possible Cause Solution It is out of battery or has low battery. Fully charge the vacuum cleaner, then resume use. It enters into overheat protection mode triggered Clear any blockages and restart the vacuum The vacuum cleaner does not work. by a blockage.
  • Page 21 Error Description of Battery Status Indicator The vacuum cleaner will stop working if any error occurs, and the indicator will blink white. Please refer to the information below for your solution. Indicator Status Indicator Description Possible Cause Solution The first indicator blinks white for 5 seconds, then Battery Depleted Recharge soon.

This manual is also suitable for:

Mi vacuum cleaner g9 plusB206

Table of Contents

Save PDF