Advertisement
Quick Links
Advertisement
Related Manuals for Xiaomi mi Dust Mite Vacuum Cleaner Pro
Summary of Contents for Xiaomi mi Dust Mite Vacuum Cleaner Pro
- Page 1 Dust Mite Vacuum Cleaner Pro User Manual...
-
Page 2: Safety Instructions
Safety Instructions Read this manual carefully before use, and retain it for future reference. WARNINGS • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. - Page 3 To prevent any mechanical injury, do not touch the roller brush with your hands during use. • Only use accessories and replacement parts that are approved by Xiaomi. • The dust mite vacuum cleaner is solely intended for cleaning and removing dust mites from home textiles like mattresses, blankets, pillows, and sofas.
-
Page 4: Package Contents
• Keep the power cord away from sharp objects that may damage it. • Do not place the dust mite vacuum cleaner on unstable surfaces of objects, such as chairs or tables, to prevent damage or personal injury caused by its falling off. •... -
Page 5: Product Overview
Product Overview Power Cord Dust Compartment Mode Button Release Button Power Button Dust Compartment Display Cover Dust Compartment Dust Compartment Groove Roller Brush Cover Suction Inlet Roller Brush UV Light Distance Sensor Hot Air Outlet Roller Brush Cover Release Button Heat Dissipation Vent UV Light Hot Air Outlet... - Page 6 Display Hot Air Drying Indicator Ultrasonic Indicator UV Indicator Smart Mode Indicator Low Suction Mode Indicator Dust Mite Density Indicator High Suction Mode Indicator Green: Low dust mite density Yellow: Moderate dust mite density Mode Button Orange: High dust mite density Power Button Notes: The Hot Air Drying, Ultrasonic, and UV functions are enabled by default.
-
Page 7: How To Use
How to Use Installing the dust compartment assembly Align the dust compartment groove with the protruding part. Press down on the dust compartment until you hear a "click", indicating it is installed in place. Dust Compartment Groove Protruding Part Turning on/off Connect the dust mite vacuum cleaner to power, and press its power button to turn it The dust mite vacuum cleaner defaults to the low suction mode the first time it is turned on. -
Page 8: Switching Modes
Switching modes Turn on the dust mite vacuum cleaner, and press the mode button to switch from low suction, smart, to high suction modes. Low suction mode: Suitable for daily cleaning of soft textiles such as dolls and quilts. Smart mode: Suitable for various cleaning scenarios. The dust mite vacuum cleaner will automatically adjust its suction to the density of dust mites;... -
Page 9: Care And Maintenance
Care & Maintenance Dust Compartment Cover Assembly Dust Compartment Cyclone Filter Holder Filter Filter Cotton Cover Separator Filter Holder Assembly WARNING: Before cleaning or maintaining the dust mite vacuum cleaner, turn it off and unplug it. Notes: Clean the dust compartment regularly to avoid the buildup of dust that could cause blockage and a decrease in suction. - Page 10 Daily cleaning of the dust compartment assembly 1. Press and hold the dust 2. Rotate the dust compartment over a compartment release button, and trash bin until the mark is aligned simultaneously pull out the dust with the icon . Open the dust compartment assembly.
- Page 11 4. Check that the baffle of the dust Baffle compartment assembly is properly installed. Then reinstall the dust Correct compartment assembly into the main body. Wrong Wrong Washing the dust compartment assembly If suction decreases, clean the dust compartment assembly promptly to regain the mite removal performance and prevent blockage from the air duct that may cause the dust mite vacuum cleaner to shut down.
- Page 12 3. Clean the surfaces of the dust compartment, dust compartment cover, cyclone separator, filter holder, filter, and filter cotton. Then rinse them with clean tap water, and air-dry them thoroughly. Notes: It is recommended to wash and clean the filter every 5 to 6 vacuuming, or you can change the cleaning frequency as needed.
- Page 13 5. Align the icon on the cyclone separator with the mark on the dust compartment cover. Then, rotate the cyclone separator until the mark aligns with the icon . When you hear a "click", they are firmly locked. 6. Lock the dust compartment and the dust compartment cover assembly securely, and then reinstall the dust compartment assembly into the dust mite vacuum cleaner.
- Page 14 2. Remove the roller brush from the 3. After cleaning, reinstall the roller right side by pulling it upwards. brush. Then, align the clips on the Remove any hair and other waste roller brush cover with the from the roller brush. corresponding slots to reinstall the roller brush cover, and press it down Note: It is recommended to clean the...
- Page 15 Clean the suction inlet and dust mite sensors Remove the dust compartment assembly, and you will see dust mite sensors in the suction inlet. Clean them with a dry cloth or tissue. Notes: Dust Mite Sensor It is normal for dust and other particles to adhere to the suction inlet.
-
Page 16: Specifications
Specifications Name: Dust Mite Vacuum Cleaner Rated Voltage: 220–240 V Model: B402HW Rated Power: 400 W Rated Frequency: 50–60 Hz Noise: ≤ 78 dB(A) Item Dimensions: 265 × 246 × 142 mm Net Weight: 2.06 kg Troubleshooting Issues Possible Causes Solutions The power cord is not Plug in the power cord properly. - Page 17 To prevent UV leakage, the Put the dust mite vacuum cleaner UV light will be off if the dust back on the textile surface, and the mite vacuum cleaner does UV light will resume working. not come in contact with the textile. The UV light is The UV light may not light up This is normal. not on. when cleaning dark-colored textiles.
-
Page 18: Regulatory Compliance Information
Regulatory Compliance Information WEEE Disposal and Recycling Information All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. - Page 19 For further information, please go to www.mi.com Manufactured for: Xiaomi Communications Co., Ltd. Manufactured by: Guangdong Deerma Technology Co., Ltd. (a Mi Ecosystem company) Address: No.4-1 Longhui Road, Malong Village Committee, Beijiao Town, Shunde District, Foshan City, Guangdong Province, China User Manual Version: V1.0...
Need help?
Do you have a question about the mi Dust Mite Vacuum Cleaner Pro and is the answer not in the manual?
Questions and answers
Добрый день! Прошу мне помочь, в пылесосе для мебели, удаление пылевого клеща Xiaomi Mijia Dust Mite Vacuum Cleaner 2 должна светиться ультрафиолетовая лампа? Заранее спасибо большое!!!
The Mi Dust Mite Vacuum Cleaner Pro has a UV light, and when the UV function is enabled, the UV indicator is on. If the UV function is disabled, the UV indicator is off. The UV indicator may also go out when the vacuum is lifted more than 5 cm from the textile surface, tilted during operation, or used on dark-colored textiles. However, the provided context does not mention the Xiaomi Mijia Dust Mite Vacuum Cleaner 2 specifically.
This answer is automatically generated