RS3 RS4 Manipulator 1. Safety
1.8 Warning Labels
The Manipulator has the following warning labels.
The warning labels are attached around the locations where specific dangers exist.
Be sure to comply with descriptions and warnings on the labels to operate and maintain the
Manipulator safely.
Do not tear, damage, or remove the warning labels. Use meticulous care when handling
those parts or units to which the following warning labels are attached as well as the nearby
areas.
Location
A
B
C
12
Warning Label
Before loosening the base mounting screws, hold the
arm and secure it tightly with a band to prevent hands
or fingers from being caught in the Manipulator.
Do not enter the work space when the Manipulator is
operating. It is extremely hazardous since the Arm
may collide and cause serious safety problems,
Hazardous voltage exists while the Manipulator is ON.
To avoid electric shock, do not touch any internal
electric parts.
NOTE
RS series Rev.4