Language Setting; False Alert; Vibrant Alert - Philips 6000 Series Manual

Smart safe box

Hide thumbs Also See for 6000 Series:

Table of Contents

Language setting

Keep the battery compartment unpowered, long press the red setting button '

'on it and do not release. Put batteries into the compartment to power the

safe up, and release the button until hearing a beep, then short press the

'Setting' button 4 times to switch system language between Chinese and English.

The switch will complete in 4 -5 seconds.

Attention: the default language is Chinese.

5 times of wrong �ngerprint entering or 3 times of wrong PIN code entering will

activate false alert. The high-pitch sound alert will last for 20 seconds, while the

system to be locked for 180 seconds.

Attention:

the safe can not be operated under 'Locked' state caused by false alert.

As shown in Figure 6, long press the black safe mode button '

seconds. There will be a voice prompt 'Vibration alert is on', indicating

successful operation. Long press it for another 3 seconds can turn the 'Vibra-

tion alert' oﬀ.

When the safe detects a certain intensity of vibration, it will activate a 20 -sec-

ond vibration alert. Any registered �ngerprint or PIN code can be used to stop

the alert.

Figure 6

'for 3

Table of Contents