Safe Mode; Keyhole Cover - Philips 6000 Series Manual

Safe mode

Under 'Safe mode', a combination of 2 registered passwords are required to
1.
unlock the safe, either '�ngerprint + �ngerprint', '�ngerprint + PIN code',
'PIN code + �ngerprint' or 'PIN code + PIN code'.
2. As shown in Figure 4, press the black safe mode button '
compartment and there will be a voice prompt 'Safe mode is on', indicating
successful activation. Press the button again can turn 'Safe mode' off.
Attention:
under 'Standard mode', any one set of registered PIN code or �ngerprint can
unlock the safe.
07
' on the battery
Figure 4

Keyhole cover

1. As shown in Figure 5, press the right end of the
keyhole cover, and the left side of the cover will jump
up. Take off cover, �nd keyhole and open the safe
with mechanical key.
Attention:
do not place the mechanical key into the safe!
Figure 5
08