Philips HR2330 User Manual page 10

12
Cautions
•
During dough mixing, do not add in other ingredients
after you pour in the water. Otherwise, it will affect the
results of the noodle texture.
•
If you notice the program is not set as automatic
program while noodle is extruding, press start/pause
button ( ) to stop the program. Then, disconnect
from the power. After cleaning the shaping discs, you
can restart the process by connecting the noodle
maker to power again.
9
The noodles will start extruding out after a
few minutes. Place a container right under
the outlet. Cut the noodles to the desired
length with the supplied disc cleaning tool.
(Figure 13)
13
Notes
•
After the noodle making is complete, if you notice
there are some leftover doughs inside the chamber,
you can press the programs button (
extrusion-only program.
•
The countdown timer of extrusion-only program is 3
minutes.
•
You may find some fine noodle threads on the noodle'
surface. This is normal.
EN
10
Caution
•
Do not select the extrusion-only program before the
dough mixing is complete. Otherwise, this will damage the
noodle maker and its lifetime.
Flour/water ratio table
Flour
1 cup
( ~250g )
2 cups
( ~500g )
) to select the
Plain noodle Egg noodle
Egg+Water
Water ( marking ) mixture
( marking )
Amount of egg
Amount of water
mixture needed
needed for a cup
for a cup of flour
of flour
( ~95ml )
( ~85ml )
Amount of water Amount of egg
needed for 2 mixture needed
cups of flour
for 2 cups of
( ~170ml )
flour ( ~190ml )