Sanyo MLS-3020U Instruction Manual page 14

PARTS DESCRIPTION AND FUNCTION
(Control panel
Pressure gauge
Setting button (TEMP.TIM/UP.vDOWN)
Indicates the pressure
Used for setting and displaying the sterilization
within the chamber.
temperature and sterilization time, and for dis-
playing the remaining sterilization time. (Refer to
page 21 for detailed instructions.)
PRESSURE GAUGE
Reset button
Cancels the operation.
Pressing this
for about one second in
the during
causes a beep to sound
and switches the unit to
standby status.
Switch button
When pressing the switch button with magnet-holder, Handle
switch will start.
13
TEMP/TIMER
DOOR , m
L A M P L_J
D
I MIN I
I HIGH PRESSURE
(RESETS ( START
Start button
Starts sterilization.
button
operation
Power switch (MAIN)
SAflYO
Labo Autoclave
,— EXHAUST —>
Exhaust knob
This knob is used to re-
lease the air within the
chamber.
Turn clockwise this knob
to close and counter-
clockwise to open.Close
the knob before starting
sterilization.