Download Print this page

Sharp Auvi SD-FX10 Manual page 15

Advertisement

Machine Translated by Google
Unplug the power
cord from the container when you are not using it for a long time, such as
when traveling to save power. Even when the power is turned off, it consumes
a small amount of power. • If you unplug the power cord, the clock settings will
disappear after about 10 minutes, and the registered broadcasting stations will
disappear after about 1 day, so reconnect them. Precautions • When
removing the power cord or loop antenna for AM, hold the plug and pull it
out. Pulling the wire may cause disconnection. • Make sure to insert the plug
securely. • When unplugging the power cord, turn off the power and then plug it
in.
Please pull out.
• Never use a power cord other than the accessories. It may cause a
malfunction or accident. Information • Please use this product in a place
of 5 ÿ ÿ 35 ÿ. • If you use this product near devices such as TVs, PCs, and
mobile phones, those devices and this product may malfunction or cause
noise. In that case, turn off the power of those devices or keep them as far
away from this product as possible.
• Fun music can be annoying in some places. Be careful not
to bother your neighbors.
the volume or listen to the
bother your neighbors . Etiquette • When using headphones,
turn down the volume so as not to irritate your ears.
• When using at night, turn down
sound of the head so as not to
Setting and canceling the demo display
When the power is turned off, the display automatically lights up and
changes to various display contents, which is called a demo display. At the
time of purchase, the demo display is canceled.
ÿ To display the demo display When the
power is off
truck
Press [TRACK] for 2 seconds or longer.
ÿ To cancel the demo display Press [TRACK] during
truck
the demo display.
truck
You can also turn it on and off by pressing [TRACK] on the remote control.
Note If the
power is turned on by pressing [POWER] when the power is off, the
demo display cannot be set.
power
If you press [POWER] to turn on the power while the demo is displayed,
the demo display disappears. Press [POWER] again to return to the
demo display.
1-BIT MD / CD SYSTEM SD-FX10
power
power
beginning
Preparation
listen
Various ways
of listening
Recording sound
Group
Setting and disa
recording / playback
edit
Convenient
Consideration
15

Advertisement

loading