microHAM ARXC.REL Quick Start Manual page 16

microHAM © 2022 All rights reserved
Non-azimutal ARXC features can be controlled from the main screen
through extended Presets. To preserve the previous behaviour, there
is a common set of Presets, which is by default assigned to all three
Antennas. However, as soon as at least one ARXC is present, each
Antenna can be optionally assigned its own individual set of presets.
When a Preset is held pressed for more than a second, the usual
control for setting azimuth appears, but it contains a new "ARXC"
button.
Pressing this button, a new window for setting Preset opens:
A - this tickbox determines, whether given Antenna has assigned an individual set of Presets,
or, if unticked, uses the common set of Presets. Consequently, in this window, the individual or
the common set of Presets is edited.
B - exit from this window, without changing the given Preset. All other buttons in this window
represent possible options, to which given Preset can be set. The currently set option is
indicated by green background color.
C - this option opens the ARXC CONTROL window, described
below.
D - these options are present only for ARXC which are of BCD-N
or 1-of-N type and advance forward or backward within the
values represented by the group.
E - these options switch individual relays within a 1-of-N group.
F - this option allows to switch to a particular value of BCD-N
group (this option is currently chosen, that's why it's highlighted in
by green background). It opens an additional window to choose
this value.
G - this is the option available for free relays. It opens an
additional window, allowing to choose the action for given relay.
16