Programming Barcodes; Resetting The Standard Product Defaults - Datalogic Gryphon I GD4132 Quick Reference Manual

Programming Barcodes

For your convenience, this guide includes the program-
ming barcodes required to configure the imager for use
with different interface (terminal/host) types.
See the Product Reference Guide (PRG) for more complete
information about programming and configurable fea-
tures. You can download the latest version of the PRG and
any other available publications for the imager from the
website listed on the back cover of this manual.

Resetting the Standard Product Defaults

If you aren't sure what programming options are in your
imager, or you've changed some options and want the fac-
tory settings restored, scan the Factory Default Settings
barcode below. This will copy the factory configuration for
the currently active interface to the current configuration.
Factory Default Settings
Some interfaces require the scanner to start
in the disabled state when powered up. If
additional scanner configuration is desired
while in this state, pull the trigger and hold it
for five seconds. The scanner will change to a
state that allows programming with bar-
codes.
Quick Reference Guide
Programming Barcodes
13