Programming Barcodes; Resetting The Standard Product Defaults - Datalogic QuickScan i QD2100 Quick Reference Manual

Programming Barcodes

For your convenience, this guide includes the programming
barcodes required to configure the imager for use with different
interface (terminal/host) types.
See the Product Reference Guide (PRG) for more complete in-
formation about programming and configurable features. You
can download the latest version of the PRG and any other avail-
able publications for the imager from the website listed on the
back cover of this manual.

Resetting the Standard Product Defaults

If you aren't sure what programming options are in your imag-
er, or you've changed some options and want the factory set-
tings restored, scan the Factory Default Settings barcode below.
This will copy the factory configuration for the currently active
interface to the current configuration.
Host Interfaces
8
Factory Default Settings
Cables may vary depending upon sys-
tem configuration.
Some interfaces require the imager to
NOTE
start in the disabled state when pow-
ered on. If additional imager configura-
tion is desired while in this state, pull
the trigger and hold it for five seconds.
The imager will change to a state that
allows programming with barcodes.
TM
QuickScan i