Download Print this page

Telit Wireless Solutions LE910C Series At Commands Reference Manual

Hide thumbs Also See for LE910C Series:

Hw design manual (73 pages)

,

User manual (56 pages)

,

Thermal design manual (26 pages)

Table Of Contents

page of 1904

/ 1904
Contents
Table of Contents
Bookmarks

Table of Contents

Advertisement

Quick Links

LE910Cx

AT Commands Reference Guide

80502ST10950A Rev. 14 – 2022-03-04

Telit Technical Documentation

Table of Contents

Advertisement

Table of Contents

Need help?

Need help?

Do you have a question about the LE910C Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Telit Wireless Solutions LE910C Series

Page 1 LE910Cx AT Commands Reference Guide 80502ST10950A Rev. 14 – 2022-03-04 Telit Technical Documentation...
Page 2: Applicability Table
LE910Cx AT Commands Reference Guide APPLICABILITY TABLE PRODUCTS LE910Cx SOFTWARE 25.21.xx2 25.30.xx4 80502ST10950A Rev. 14 Page 2 of 1904 2022-03-04 Not Subject to NDA...
Page 3: Table Of Contents
LE910Cx AT Commands Reference Guide Contents APPLICABILITY TABLE INTRODUCTION Scope Audience Contact Information, Support Symbol Convention COMMANDS Definitions AT Command Syntax 2.2.1. String Type Parameters 2.2.2. Command Lines 2.2.2.1. ME Error Result Code - +CME ERROR: <err> 2.2.2.2. Message Service Failure Result Code - +CMS ERROR: <err> 2.2.3.
Page 4 LE910Cx AT Commands Reference Guide 3.1.14. AT#ECTD - Enhanced call tone disable 3.1.15. AT+CSNS - Single Numbering Scheme 3.1.16. AT+CR - Service Reporting Control 3.1.17. AT+CRC - Cellular Result Codes 3.1.18. AT+CVHU - Voice Hung Up Control 3.1.19. AT+CBST - Select Bearer Service Type 3.1.20.
Page 5 LE910Cx AT Commands Reference Guide 3.2.2.26. AT#CGSN - Product Serial Number Identification 3.2.2.27. AT#SWPKGV - Request Software Package Version 3.2.2.28. AT+CPAS - Phone Activity Status 3.2.2.29. AT+CFUN - Set Phone Functionality 3.2.2.30. AT+CIND - Indicator Control 3.2.2.31. AT+CMER - Mobile Equipment Event Reporting 3.2.2.32.
Page 6 LE910Cx AT Commands Reference Guide 3.2.2.65. AT&V0 - Display Current Configuration and Profile 3.2.2.66. AT#FWSWITCH - Set Active Firmware Image 3.2.2.67. AT#FWAUTOSIM - Automatic Carrier Switch By SIM 3.2.2.68. AT#SECIFCFG - Secure Interface Configuration 3.2.2.69. AT#SECIFAUTH - Secure Interface Authentication 3.2.2.70.
Page 7 LE910Cx AT Commands Reference Guide 3.2.4.2. ATQ - Quiet Result Codes 3.2.4.3. ATV - Response Format 3.2.4.4. ATI - Identification Information 3.2.4.5. AT&C - Data Carrier Detect (DCD) Control 3.2.4.6. AT&D - Data Terminal Ready (DTR) Control 3.2.4.7. AT\Q - Standard Flow Control 3.2.4.8.
Page 8 LE910Cx AT Commands Reference Guide 3.2.6.2. AT+DS - Data Compression 3.2.6.3. AT+DR - Data Compression Reporting Jamming Detection and Report 3.3.1. AT#JDRENH2 - Enhanced Jamming Detection and Report 3.3.2. AT#JDRGNSS - GNSS Jamming Detect & Report 3.3.3. AT#JDR4GCFG - LTE Jamming Detection Threshold Configuration Network 3.4.1.
Page 9 LE910Cx AT Commands Reference Guide 3.4.33. AT#ENS - Enhanced Network Selection 3.4.34. AT+WS46 - PCCA STD-101 Select Wireless Network 3.4.35. AT+CEDRXS - eDRX Setting 3.4.36. AT+CEDRXRDP - eDRX Read Dynamic Parameters 3.4.37. AT+CEREG - EPS Network Registration Status 3.4.38. AT#RFSTS - Read Current Network Status 3.4.39.
Page 10 LE910Cx AT Commands Reference Guide 3.5.3. AT+CPBF - Find Phonebook Entries 3.5.4. AT+CPBW - Write Phonebook Entry 3.5.5. AT#CPBGR - Read Group Entries 3.5.6. AT#CPBGW - Write Group Entry 3.5.7. AT#CPBD - Delete All Phonebook Entries 3.5.8. AT#CPBE - Emergency Numbers Programming SMS &...
Page 11 LE910Cx AT Commands Reference Guide 3.7.3. AT+CSDF - Setting Date Format 3.7.4. AT+CTZR - Time Zone Reporting 3.7.5. AT+CTZU - Automatic Time Zone Update 3.7.6. AT#CCLK - Clock Management 3.7.7. AT#CCLKMODE - Clock Mode 3.7.8. AT#CLKSRC - Set Time Clock Source 3.7.9.
Page 12 LE910Cx AT Commands Reference Guide 3.8.29. AT#WLANMACACCEPT - Add/Remove MAC address to/from accept list 3.8.30. AT#WLANCOUNTRYCODE - Set the regulatory domain 3.8.31. AT#WLANMAC - Return Wi-Fi Hot-Spot MAC address 3.8.32. AT#WLANPC - Change the channel number and the wlan protocol Packet Domain 3.9.1.
Page 13 LE910Cx AT Commands Reference Guide 3.10.1. AT+CPIN - Enter the PIN 3.10.2. AT+CPINR - Remaining PIN Retries 3.10.3. AT#PCT - Display PIN Counter 3.10.4. AT+ICCID - Read ICCID 3.10.5. AT+CIMI - International Mobile Subscriber Identity (IMSI) 3.10.6. AT#CIMI - International Mobile Subscriber Identity (IMSI) 3.10.7.
Page 14 LE910Cx AT Commands Reference Guide 3.11.6. AT#STIME - Set SIM Toolkit timeout value Audio 3.12.1. Audio Basic Configuration 3.12.1.1. AT+CALM - Alert Sound Mode 3.12.1.2. AT+CRSL - Ringer Sound Level 3.12.1.3. AT+CLVL - Loudspeaker Volume Level 3.12.1.4. AT+CMUT - Microphone Mute Control 3.12.1.5.
Page 15 LE910Cx AT Commands Reference Guide 3.12.5. Embedded DTMF Decoder & TTY 1023 3.12.5.1. AT#DTMF - Embedded DTMF Decoder Enabling 1023 3.12.5.2. AT#TTY - TeleType Writer 1025 3.12.6. Digital Voice Interface 1027 3.12.6.1. AT#DVI - Digital Voiceband Interface 1027 3.12.6.2. AT#DVIEXT - Digital Voiceband Interface Extension 1030 3.12.6.3.
Page 16 LE910Cx AT Commands Reference Guide 3.15.2. AT#ETHCFG - Ethernet LAN configuration 1092 3.15.3. AT#ETHIP - Return assigned IP address 1094 3.15.4. AT#ETHMODE - Change Ethernet Mode 1095 3.15.5. AT#ETHSTATUS - Link status of Ethernet 1097 3.15.6. AT#ETHEN - Enable/Disable ETH 1099 3.15.7.
Page 17 LE910Cx AT Commands Reference Guide 3.16.1.5. AT#RNDISC - Remote Network Driver Interface Specification configure 1205 3.16.1.6. AT#RNDISD - Remote Network Driver Interface Specification shutdown 1209 IPEasy 1211 3.17.1. AT#SGACT - PDP Context Activation 1211 3.17.2. AT#SGACTCFG - PDP Automatic Context Activation-Reactivation 1215 3.17.3.
Page 18 LE910Cx AT Commands Reference Guide 3.17.37. AT#ST - Socket Type 1304 3.17.38. AT#SKTL - Socket Listen 1307 3.17.39. AT#SSENDUDP - Send UDP Data to a Specific Remote Host 1311 3.17.40. AT#SSENDUDPEXT - Send UDP Data to a Specific Remote Host EXTENDED 1315 3.17.41.
Page 19 LE910Cx AT Commands Reference Guide SMTP 1388 3.19.1. AT#ESMTP - E-mail SMTP Server 1388 3.19.2. AT#APPSKTCFG - Configure Socket Parameters 1390 3.19.3. AT#SEMAIL - E-mail Sending With GPRS Context Activation 1392 3.19.4. AT#EMAILACT - E-mail GPRS Context Activation 1394 3.19.5. AT#SMTPCFG - Configure SMTP Parameters 1396 3.19.6.
Page 20 LE910Cx AT Commands Reference Guide 3.22.5. AT#CSURVEXT - Extended Network Survey 1480 3.22.6. AT#CSURVC - Network Survey (Numeric Format) 1482 3.22.7. AT#CSURVW - Network Survey with only WCDMA 1491 3.22.8. AT#CSURVUC - Network Survey of User Defined Channels (Numeric Format) 1494 3.22.9.
Page 21 LE910Cx AT Commands Reference Guide 3.25.8. AT#DWRCVR - Receive Raw Data from M2M Service 1584 3.25.9. AT#DWEN - Enable Agent Features 1586 3.25.10. AT#LWM2MSKIP - No Starting any LwM2M Client 1588 3.25.11. AT+ODIS - Commands for Saving and Retrieving the Odis Parameters 1593 3.25.12.
Page 22 LE910Cx AT Commands Reference Guide 3.28.1.8. AT$GPSSTOP - Stop Location Service Request 1674 3.28.1.9. AT$GPSSLSR - Start Location Service Request 1676 3.28.1.10. AT$SUPLV - Set the Version of the Supported SUPL 1683 3.28.1.11. AT$SLP - Update SLP Address 1685 3.28.1.12. AT$SLPTYPE - Update SLP Type Address 1687 3.28.1.13.
Page 23 LE910Cx AT Commands Reference Guide PSM (Power Saving Mode) 1754 3.29.1. AT+CPSMS - Power Saving Mode Setting 1754 3.29.2. AT#PSMWDISACFG - Power Saving mode configuration 1759 3.29.3. AT#PSMCTS - Power Saving Mode CTS 1761 1763 3.30.1. AT#PDPIMSCFGE - edit PDP Profile Registry 1763 3.30.2.
Page 24 LE910Cx AT Commands Reference Guide 3.35.3. AT#BDISCONNECT - BLE Disconnect 1834 3.35.4. AT#BSCAN - BLE Scan 1836 3.35.5. AT#BSRVD - BLE Service Discovery 1838 3.35.6. AT#BREAD - BLE Read 1840 3.35.7. AT#BWRITE - BLE Write 1842 3.35.8. AT#BADVE - BLE Advertise Enable 1844 3.35.9.
Page 25 LE910Cx AT Commands Reference Guide 4.2.5. 3rd Party Rights 1895 4.2.6. Waiver of Liability 1895 Safety Recommendations 1895 GLOSSARY 1897 DOCUMENT HISTORY 1901 80502ST10950A Rev. 14 Page 25 of 1904 2022-03-04 Not Subject to NDA...
Page 26: Introduction
LE910Cx AT Commands Reference Guide INTRODUCTION Scope This document is aimed to provide a detailed specification and a comprehensive listing for reference for the entire AT command set. Audience Readers of this document should be familiar with Telit modules and their ease of controlling by means of AT Commands.
Page 27: Symbol Convention
LE910Cx AT Commands Reference Guide Symbol Convention Danger: This information MUST be followed or catastrophic equipment failure or personal injury may occur. Warning: Alerts the user on important steps about the module integration. If these points are not followed, the module and end user equipment may fail or malfunction.
Page 28 LE910Cx AT Commands Reference Guide Read:This section provides all information related to READ functionality of the AT command involved. If there is strictly and relevant READ information, it can be found at the end of the section. Test: This section provides all information related to TEST functionality of the AT command involved.
Page 29: Commands
LE910Cx AT Commands Reference Guide COMMANDS The Telit family of wireless modules can be controlled via the serial interface using the standard AT commands. It complies with: Hayes standard AT command set, to maintain the compatibility with existing SW programs. 3GPP TS 27.007 specific AT command and GPRS specific commands.
Page 30: At Command Syntax
LE910Cx AT Commands Reference Guide displayed on the command line. When the sub parameter is not given in AT commands that have a Read command, new value is equal to its previous value. In AT commands that do not store the values of any of their sub parameters, and action type therefore do not have a Read command, which are called commands,...
Page 31: String Type Parameters
LE910Cx AT Commands Reference Guide If all the sub parameters of a parameter type command +CMD are optional, issuing AT+CMD=<CR> causes the result code to be returned to OK and the previous values of the omitted sub parameters to be retained. 2.2.1.
Page 32: Me Error Result Code - +Cme Error:
LE910Cx AT Commands Reference Guide Note: The set of proprietary AT commands differs from the standard one because the name of each of them begins with either "@", "#", "$" or "*". Proprietary AT commands follow the same syntax rules as extended commands.

Page 33 LE910Cx AT Commands Reference Guide Parameter: <err> - error code can be either numeric or detailed (see +CMEE). The possible values of <err> are reported in the table: Note: “Numeric Format” Not all modules support the error codes shown in the table Note: “Verbose Format”...
Page 34 LE910Cx AT Commands Reference Guide Numeric Format Verbose Format invalid index not found memory failure text string too long invalid characters in text string dial string too long invalid characters in dial string no network service network timeout network not allowed - emergency calls only numeric parameter instead of text parameter text parameter instead of numeric parameter numeric parameter out of bounds...
Page 35 LE910Cx AT Commands Reference Guide Numeric Format Verbose Format Parameter length error for all Auth commands Temporary error for all Auth command not verified hidden key unknown Illegal MESSAGE Illegal ME GPRS services not allowed PLMN not allowed Location area not allowed Roaming not allowed in this location area service option not supported requested service option not subscribed...
Page 36 LE910Cx AT Commands Reference Guide Numeric Format Verbose Format Minimum TFT per PDP address error Duplicate TFT eval prec index Invalid TFT param combination Invalid number of parameters Invalid Parameter Call index error Call state error Sys state error Parameters error generic undocumented error wrong state wrong mode...
Page 37 LE910Cx AT Commands Reference Guide Numeric Format Verbose Format already listening socket disconnection can not resume socket ip version type incompatible ipv6 not enabled Generic undocumented error wrong state Can not activate Can not resolve name Can not allocate control socket Can not connect control socket Bad or no response from server Not connected...
Page 38 LE910Cx AT Commands Reference Guide Numeric Format Verbose Format FTP write command error FTP read data closed FTP read data error FTP write data closed FTP write data error FTP host not found FTP accept failure FTP listen failure FTP bind failure FTP file create failure FTP file get failure FTP file put failure...
Page 39 LE910Cx AT Commands Reference Guide Numeric Format Verbose Format Network survey error (Busy) Network survey error (Wrong request) Network survey error (Aborted) LU processing Network search aborted PTM mode Network search terminated CSG Search processing Active call state RR connection established SIM invalid No Response for AT Command 1000...
Page 40: Message Service Failure Result Code - +Cms Error:
LE910Cx AT Commands Reference Guide Numeric Format Verbose Format 1100 Model not recognized 1101 Model information missing 1102 Unable to open the file 1103 Unable to close the file 1104 Unable to read the nv file 1105 Unable to write the nv file 1106 Input pattern is wrong 1113...

Page 41 LE910Cx AT Commands Reference Guide Numeric Format Meaning SMS service of ME reserved operation not allowed operation not supported invalid PDU mode parameter invalid text mode parameter SIM not inserted SIM PIN required PH-SIM PIN required SIM failure SIM busy SIM wrong SIM PUK required SIM PIN2 required...
Page 42: Information Responses And Result Codes
LE910Cx AT Commands Reference Guide Numeric Format Meaning No response from network Table 3: Message Service Failure Result Code 2.2.3. Information Responses and Result Codes The TA response, in case of verbose response format enabled, for the previous examples command line could be as shown below: information response to +CMD1? <CR><LF>+CMD1:2,1,10<CR><LF>...
Page 43: Command Response Time-Out
LE910Cx AT Commands Reference Guide CONNECT 14400 CONNECT 1200/75 Table 4: basic result codes Note: <text> can be"300", "1200", "2400", "4800", "9600", "14400" or "1200/75" 2.2.4. Command Response Time-Out Every command issued to the Telit modules returns a result response, if response codes are enabled (default).
Page 44 LE910Cx AT Commands Reference Guide NVM, these values are set either as factory or user profiles. There are two customizable user profiles and one factory profile in the NVM of the device: by default, the device will start with user profile 0 equal to the factory profile. For backward compatibility, each profile is divided into two sections, one base section which was historically the one saved and restored in early releases of code, and the extended section which includes all remaining values.
Page 45: At Command Short Overview Table
LE910Cx AT Commands Reference Guide instance used to enter the command. It is a profile used by the specific AT instance. Examples of the AT commands: +FCLASS, +CREG, +CLIP, #STIA, etc. Common profile the parameters values set by the command are stored in the profile extended section.
Page 46: At Commands Availability Table
LE910Cx AT Commands Reference Guide SELINT indicates on which AT interface type the AT command is available. AT Commands Availability Table AT Commands Call & DTMF AT+CHUP ● ● ● ● ● ● ● ● ● ● ● ● ● ●...
Page 47 LE910Cx AT Commands Reference Guide AT Commands AT#SELINT ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● AT&F ● ● ● ● ● ● ● ● ● ● ● ● ●...
Page 48 LE910Cx AT Commands Reference Guide AT Commands AT#MBN ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● AT#MWI ● ● ● ● ● ● ● ● ● ● ● ● ●...
Page 49 LE910Cx AT Commands Reference Guide AT Commands AT#CIND ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● AT#TID ● ● ● ● ● ● AT+IMEISV ● ● ● ● ● ●...
Page 50 LE910Cx AT Commands Reference Guide AT Commands AT+IFC ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● AT+ICF ● ● ● ● ● ● ● ● ● ● ● ● ●...
Page 51 LE910Cx AT Commands Reference Guide AT Commands AT+CLCK ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● AT+CPWD ● ● ● ● ● ● ● ● ● ● ● ● ●...
Page 52 LE910Cx AT Commands Reference Guide AT Commands AT#ALLOWHAC ● ● ● ● ● ● ● ● ● ● ● ● ● AT#MONI ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●...
Page 53 LE910Cx AT Commands Reference Guide AT Commands AT+CPMS ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● AT+CMGF ● ● ● ● ● ● ● ● ● ● ● ● ●...
Page 54 LE910Cx AT Commands Reference Guide AT Commands AT+CSTF ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● AT+CALD ● ● ● ● ● ● ● ● ● ● ● ● ●...
Page 55 LE910Cx AT Commands Reference Guide AT Commands AT#DUALAPN ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● AT+CGCLASS ● ● ● ● ● ● ● ● ● ● ● AT#LABIMS ●...
Page 56 LE910Cx AT Commands Reference Guide AT Commands AT+CIMI ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● AT#CIMI ● ● ● ● ● ● ● ● ● ● ● ● ●...
Page 57 LE910Cx AT Commands Reference Guide AT Commands AT+CLVL ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● AT+CMUT ● ● ● ● ● ● ● ● ● ● ● ● ● ● AT+CSIL ● ●...
Page 58 LE910Cx AT Commands Reference Guide AT Commands AT#DVI ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● AT#DVIEXT ● ● ● ● ● ● ● ● ● ● ● ● ● ● AT#DVICFG ●...
Page 59 LE910Cx AT Commands Reference Guide AT Commands AT#ETHSTATUS ● ● ● ● ● ● ● ● ● AT#ETHEN ● ● ● ● ● ● ● ● ● AT#USBZLPDIS ● ● ● ● ● ● ● ● ● ● ● ● ●...
Page 60 LE910Cx AT Commands Reference Guide AT Commands AT#SGACT ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● AT#SGACTCFG ● ● ● ● ● ● ● ● ● ● ● ● ●...
Page 61 LE910Cx AT Commands Reference Guide AT Commands AT#SSENDUDP ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● AT#SSENDUDPEXT ● ● ● ● ● ● ● ● ● ● ● ● ●...
Page 62 LE910Cx AT Commands Reference Guide AT Commands AT#ESMTP ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● AT#APPSKTCFG ● ● ● ● ● ● ● ● ● ● ● ● ●...
Page 63 LE910Cx AT Commands Reference Guide AT Commands AT#CSURVU ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● AT#CSURVUC ● ● ● ● ● ● ● ● ● ● ● ● ●...
Page 64 LE910Cx AT Commands Reference Guide AT Commands AT#DWCONN ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● AT#DWRCVR ● ● ● ● ● ● ● ● ● ● ● ● ●...
Page 65 LE910Cx AT Commands Reference Guide AT Commands AT$SLPTYPE ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● AT$SUPLCFG ● ● ● ● ● ● ● ● ● ● ● ● ●...
Page 66 LE910Cx AT Commands Reference Guide AT Commands AT#PSMCTS ● ● ● ● ● ● AT#PSMURC ● ● ● ● ● ● AT+CIREG ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●...
Page 67 LE910Cx AT Commands Reference Guide AT Commands AT#BSCAN ● ● ● ● ● ● ● AT#BSRVD ● ● ● ● ● ● ● AT#BREAD ● ● ● ● ● ● ● AT#BWRITE ● ● ● ● ● ● ● AT#BADVE ●...
Page 68 LE910Cx AT Commands Reference Guide Note: LE910Cx-NF variant supports 3 mobile network operators such as AT&T, VZW and T-Mobile and there are some AT commands dedicated and unique to only one specific operator. Notation for LE910Cx-NF variant is marked as below. “●”: Common.
Page 69: At Commands References
LE910Cx AT Commands Reference Guide AT COMMANDS REFERENCES Call & DTMF 3.1.1. AT+CHUP - Hang Up Call This command cancels all active and held calls 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT+CHUP Execution command cancels all active and held calls, also if a multi- party session is running...
Page 70: At+Csta - Select Type Of Address
LE910Cx AT Commands Reference Guide 3.1.2. AT+CSTA - Select Type of Address Select type of address. 3GPP TS 24.008 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Specific profile AT+CSTA=[<type>] Set command selects the type of number for further dialing commands (D) according to 3GPP specifications.
Page 71 LE910Cx AT Commands Reference Guide AT+CSTA=? Test command reports the range of the <type> parameter values. 80502ST10950A Rev. 14 Page 71 of 1904 2022-03-04 Not Subject to NDA...
Page 72: At+Fclass - Select Active Service Class
LE910Cx AT Commands Reference Guide 3.1.3. AT+FCLASS - Select Active Service Class This command sets the wireless module in specified connection mode (data, voice), hence all the calls done afterwards will be data or voice. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout...
Page 73: At#Acal - Automatic Call
LE910Cx AT Commands Reference Guide 3.1.4. AT#ACAL - Automatic Call Automatic Call. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT#ACAL=[<mode>] Set command enables/disables the automatic call function. Parameter: Name Type Default Description <mode> integer disables or enables the automatic call function Values:...
Page 74 LE910Cx AT Commands Reference Guide AT#ACAL? Read command reports the current automatic call function mode in the format: #ACAL: <mode> As a consequence of the introduction of the command #ACALEXT (Extended Automatic Call), it is possible that the read command returns a value supported by #ACALEXT but not supported by #ACAL.
Page 75: At#Acalext - Extended Automatic Call
LE910Cx AT Commands Reference Guide 3.1.5. AT#ACALEXT - Extended Automatic Call This command enables the extended automatic call function. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT#ACALEXT=<mode>,<index> Set command enables/disables the extended automatic call function. Parameters: Name Type...
Page 76 LE910Cx AT Commands Reference Guide call to the number stored in position <index> in the selected phonebook. The type of call depends on the last setting of the command +FCLASS. See &Z and &N commands respectively to write or read the phone number on/from the internal phonebook of the module.
Page 77: At#Ecam - Extended Call Monitoring
LE910Cx AT Commands Reference Guide 3.1.6. AT#ECAM - Extended Call Monitoring This command enables/disables the call monitoring function in the ME. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Specific profile AT#ECAM=[<onoff>] Set command enables/disables the call monitoring function in the ME. Parameter: Name Type...
Page 78 LE910Cx AT Commands Reference Guide 2 : connecting (MO) 3 : active 4 : hold 5 : waiting (MT) 6 : alerting (MT) 7 : busy 8 : retrieved 9 : CNAP (Calling Name Presentation) information (MT) <calltype> integer call type indicator Values: voice data...
Page 79 LE910Cx AT Commands Reference Guide #ECAM: <onoff> AT#ECAM=? Test command returns the list of supported values for <onoff> 80502ST10950A Rev. 14 Page 79 of 1904 2022-03-04 Not Subject to NDA...
Page 80: At#Ecamurc - Extended Call Monitoring Unsolicited Response Mode
LE910Cx AT Commands Reference Guide 3.1.7. AT#ECAMURC - Extended Call Monitoring Unsolicited Response mode This command Change the mode of #ECAM URC presentation. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT#ECAMURC=<mode> Set command Change the mode of #ECAM URC presentation. Parameter: Name Type...
Page 81 LE910Cx AT Commands Reference Guide Mode = 0 atd0YYYYYYYYY; #ECAM: 0,1,1,,,"0YYYYYYYYY",129 #ECAM: 0,3,1,,, at+chup #ECAM: 0,0,1,,, Mode = 1 atd0YYYYYYYYY; #ECAM: 0,1,1,,,"0YYYYYYYYY",129 #ECAM: 0,3,1,,, at+chup #ECAM: 0,0,1,,, 80502ST10950A Rev. 14 Page 81 of 1904 2022-03-04 Not Subject to NDA...
Page 82: At#Cff - Call Forwarding Flags
LE910Cx AT Commands Reference Guide 3.1.8. AT#CFF - Call Forwarding Flags The command configures the format of call forwarding URC SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT#CFF=<enable> Set command enables/disables the presentation of the call forwarding flags URC Parameter: Name...
Page 83 LE910Cx AT Commands Reference Guide CFU disabled CFU enabled <fwdtonum> string Reports phone number used to forward the incoming calls AT#CFF? Read command reports whether the presentation of the call forwarding flags URC is currently enabled or not. Moreover, if the flags field is present in the SIM, it reports the current status of the call forwarding flags as they are currently stored on SIM and the number incoming calls are forwarded to.
Page 84: At#Cesthlck - Call Establishment Lock
LE910Cx AT Commands Reference Guide 3.1.9. AT#CESTHLCK - Call Establishment Lock This command can be used to disable call abort before the DCE enters connected state. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT#CESTHLCK=[<closure_type>] Parameter: Name...
Page 85: At+Vts - Dtmf Tones Transmission
LE910Cx AT Commands Reference Guide 3.1.10. AT+VTS - DTMF Tones Transmission The command handles the transmission of DTMF tones. 3GPP TS 27.007 TIA IS-101 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+VTS=<dtmfString>[,<duration>] Execution command allows the transmission of DTMF tones. Parameters: Name Type...
Page 86 LE910Cx AT Commands Reference Guide 10÷255 : a single DTMF tone will be transmitted for a time <duration> (in 10 ms multiples), no matter what the current AT+VTD setting is The character P does not correspond to any DTMF tone, but it is interpreted as a pause of 3 seconds between the preceding and succeeding DTMF string elements.
Page 87: At+Vtd - Tone Duration
LE910Cx AT Commands Reference Guide 3.1.11. AT+VTD - Tone Duration This command sets the length of tones transmitted with +VTS command. 3GPP TS 27.007 TIA IS-101 SIM Presence Setting saved Can be aborted MAX timeout SELINT Common Required profile AT+VTD=<duration> Set command refers to an integer <duration>...
Page 88 LE910Cx AT Commands Reference Guide Test command provides the list of supported <duration> 80502ST10950A Rev. 14 Page 88 of 1904 2022-03-04 Not Subject to NDA...
Page 89: At+Cmod - Call Mode
LE910Cx AT Commands Reference Guide 3.1.12. AT+CMOD - Call mode This command set selects the call mode. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CMOD=[<mode>] Set command selects the call mode of further dialing commands (D) or for next answering command (A).
Page 90 LE910Cx AT Commands Reference Guide Read command returns values supported as a compound value. +CMOD: <mode> AT+CMOD=? +CMOD: (list of supported <mode>) 80502ST10950A Rev. 14 Page 90 of 1904 2022-03-04 Not Subject to NDA...
Page 91: At#Codecims - Codec For Ims
LE910Cx AT Commands Reference Guide 3.1.13. AT#CODECIMS - Codec for IMS This command sets the IMS codec mode. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#CODECIMS=[<amr_wb>],[<amr_nb>],[<amr_wb_en>] Set command sets the IMS codec mode. Parameters: Name Type Default...
Page 92 LE910Cx AT Commands Reference Guide : Mode 0 (4.75kbps) : Mode 1 (5.15kbps) : Mode 2 (5.9kbps) : Mode 3 (6.17kbps) 0x10 : Mode 4 (7.4kbps) 0x20 : Mode 5 (7.95kbps) 0x40 : Mode 6 (10.2kbps) 0x80 : Mode 7 (12.2kbps) 0x100 : Mode 8 (12.2kbps) <amr_wb_en>...
Page 93 LE910Cx AT Commands Reference Guide #CODECIMS: <amr_wb>,<amr_nb>,<amr_wb_en> AT#CODECIMS=? Test command returns the available range values of parameters: <amr_wb>,<amr_nb>,<amr_wb_en> at#codecims=149,5,1 Means : <amr_wb> = 149 ; mode 0, 2, 4, 7 <amr_nb> = 5 ; mode 0, 2 <amr_wb_en> = 1 ; AMR-Wideband is enabled 80502ST10950A Rev.
Page 94: At#Ectd - Enhanced Call Tone Disable
LE910Cx AT Commands Reference Guide 3.1.14. AT#ECTD - Enhanced call tone disable This command sets to disable related with call tone according to <type> parameter. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#ECTD=[<type>] Set command sets to disable related with call tone according to <type> parameter.
Page 95: At+Csns - Single Numbering Scheme
LE910Cx AT Commands Reference Guide 3.1.15. AT+CSNS - Single Numbering Scheme This command selects the bearer used when the mobile terminated single numbering scheme call is established. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT+CSNS=[<mode>]...
Page 96 LE910Cx AT Commands Reference Guide AT+CSNS? Read command returns current value of the parameter <mode>. AT+CSNS=? Test command returns supported values of parameter <mode>. In LE910C1-SV/ST/SA, set command has no effect is included only for backward compatibility. 80502ST10950A Rev. 14 Page 96 of 1904 2022-03-04 Not Subject to NDA...
Page 97: At+Cr - Service Reporting Control
LE910Cx AT Commands Reference Guide 3.1.16. AT+CR - Service Reporting Control This command enables the +CR reporting. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT+CR=[<mode>] Set command controls whether or not intermediate result code +CR is returned from TA to TE.
Page 98 LE910Cx AT Commands Reference Guide After power off/on in LE910Cx the value returen to "0". +CR: <serv> Values: ASYNC asynchronous transparent SYNC synchronous transparent REL ASYNC asynchronous non-transparent REL SYNC synchronous non-transparent This command replaces V.25ter [14] command Modulation Reporting Control (+MR), which is not appropriate for use with a UMTS terminal.
Page 99: At+Crc - Cellular Result Codes
LE910Cx AT Commands Reference Guide 3.1.17. AT+CRC - Cellular Result Codes Set command controls whether the extended format of incoming call indication is used. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Specific profile AT+CRC=<mode>...
Page 100 LE910Cx AT Commands Reference Guide ASYNC : asynchronous transparent data SYNC : synchronous transparent data REL ASYNC : asynchronous non-transparent data REL SYNC : synchronous non-transparent data : facsimile (TS 62) VOICE : normal voice (TS 11) Entering AT+CRC= returns OK but has no effect. AT+CRC? Read command returns current value of the parameter <mode>...
Page 101: At+Cvhu - Voice Hung Up Control
LE910Cx AT Commands Reference Guide 3.1.18. AT+CVHU - Voice Hung Up Control This command is used in order to set how to disconnect a voice connection. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Specific profile AT+CVHU=[<mode>] Set command selects whether ATH or "drop DTR"...
Page 102 LE910Cx AT Commands Reference Guide AT+CVHU=? Test command reports the range of supported values for parameter <mode>. 80502ST10950A Rev. 14 Page 102 of 1904 2022-03-04 Not Subject to NDA...
Page 103: At+Cbst - Select Bearer Service Type
LE910Cx AT Commands Reference Guide 3.1.19. AT+CBST - Select Bearer Service Type Select bearer service type and connection element for data calls 3GPP TS 27.007 • 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Specific profile AT+CBST=[<speed>[,<name>[,<ce>]]] Set command selects the bearer service <name>...
Page 104 LE910Cx AT Commands Reference Guide : 56000 bps (V.34) : 14400 bps (V110 or X.31 flag stuffing) : 14400 bps (V110 or X.31 flag stuffing) : 38400 bps (V110 or X.31 flag stuffing) : 56000 bps (V110 or X.31 flag stuffing : 64000 bps (X.31 flag stuffing) 116 : 64000 bps (bit transparent) 134 : 64000 bps (multimedia)
Page 105 LE910Cx AT Commands Reference Guide AT+CBST=75,0,1 (V.110 14.4k, non transparent) <WCDMA network> AT+CBST= 0,0,1 (Autobaud 57.6k, non transparent) AT+CBST=14,0,1 (V.34 14.4k, non transparent) AT+CBST=16,0,1 (V.34 28.8k, non transparent) AT+CBST=17,0,1 (V.34 33.6k, non transparent) AT+CBST=43,0,1 (V.120 14.4k, non transparent) AT+CBST=48,0,1 (V.120 28.8k, non transparent) AT+CBST=51,0,1 (V.120 56k, non transparent) AT+CBST=75,0,1 (V.110 14.4k, non transparent) AT+CBST=80,0,1 (V.110 28.8k, non transparent)
Page 106 LE910Cx AT Commands Reference Guide AT+CBST= 7,0,1 (V.32 9.6k, non transparent) - Not supported AT+CBST=12,0,1 (V.34 9.6k, non transparent)) - Not supported AT+CBST=39,0,1 (V.120 9.6k, non transparent) - Not supported AT+CBST=71,0,1 (V.110 9.6k, non transparent) - Not supported AT+CBST= 7,0,0 (V32 9.6k, transparent) - Not supported AT+CBST=12,0,0 (V34 9.6k, transparent) - Not supported AT+CBST=14,0,0 (V34 14.4k, transparent) - Not supported 80502ST10950A Rev.
Page 107: At+Crlp - Radio Link Protocol
LE910Cx AT Commands Reference Guide 3.1.20. AT+CRLP - Radio Link Protocol Set Radio Link Protocol (RLP) parameters. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT+CRLP=[<iws>[,<mws>[,<T1>[,<N2>[,<ver>]]]]] Set command sets parameters used when non-transparent data calls are originated.
Page 108 LE910Cx AT Commands Reference Guide 42÷255 : default value is 52 (ver 2) <N2> integer retransmission attempts Value: 1÷255 : default value is 6 (ver 0/1/2) <ver> integer protocol version Value: 0÷2 : supported value AT+CRLP? Read command returns current settings for each supported RLP version <ver>.
Page 109: At#Ncih - No Carrier Indication Handling
LE910Cx AT Commands Reference Guide 3.1.21. AT#NCIH - NO CARRIER Indication Handling This command purpose is to Enable\Disable the NO CARRIER indication message when an incoming call is dropped. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT#NCIH=<enable>...
Page 110 LE910Cx AT Commands Reference Guide 80502ST10950A Rev. 14 Page 110 of 1904 2022-03-04 Not Subject to NDA...
Page 111: General Control And Config
LE910Cx AT Commands Reference Guide General Control and Config 3.2.1. Command Line Prefixes 3.2.1.1. AT - Starting a Command Line AT is the prefix used to start a command line. ITU-T Recommendation V.25 ter 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT...
Page 112: A/ - Last Command Automatic Repetition
LE910Cx AT Commands Reference Guide 3.2.1.2. A/ - Last Command Automatic Repetition The command immediately executes the previously issued command or commands. ITU-T Recommendation V.25 ter SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required If the prefix A/ is issued, the device immediately executes once again the body of the preceding command line.
Page 113: At#/ - Repeat Last Command
LE910Cx AT Commands Reference Guide 3.2.1.3. AT#/ - Repeat Last Command The command immediately executes the previously issued command or commands. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#/ If AT#/ is issued, the device immediately executes once again the body of the preceding command line.
Page 114: Generic Modem Control
LE910Cx AT Commands Reference Guide 3.2.2. Generic Modem Control 3.2.2.1. AT#SELINT - Select Interface Style This command sets the AT command interface style. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#SELINT=[<v>] Set command sets the AT command interface style depending on parameter.
Page 115: At&F - Set To Factory-Defined Configuration
LE910Cx AT Commands Reference Guide 3.2.2.2. AT&F - Set to Factory-Defined Configuration Set configuration parameters to default values. ITU-T Recommendation V.25 ter SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT&F[<value>] Execution command sets the configuration parameters to default values specified by manufacturer;...
Page 116: Atz - Soft Reset
LE910Cx AT Commands Reference Guide 3.2.2.3. ATZ - Soft Reset Soft Reset ITU-T Recommendation V.25 ter SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required ATZ[<n>] Execution command loads the base section of the specified user profile and the extended section of the default factory profile Parameter: Name...
Page 117: At&Y - Default Reset Basic Profile Designation
LE910Cx AT Commands Reference Guide 3.2.2.4. AT&Y - Default Reset Basic Profile Designation Define the basic profile is loaded on startup. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT&Y[<n>] Execution command defines the basic profile that will be loaded on startup.
Page 118: At&P - Default Reset Full Profile Designation
LE910Cx AT Commands Reference Guide 3.2.2.5. AT&P - Default Reset Full Profile Designation Define which full profile is loaded at startup. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT&P[<n>] Execution command defines which full profile will be loaded at startup. Parameter: Name Type...
Page 119: At&W - Store Current Configuration
LE910Cx AT Commands Reference Guide 3.2.2.6. AT&W - Store Current Configuration Stores the complete configuration of the device. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT&W[<n>] Execution command stores on profile <n> the complete configuration of the device.
Page 120: At&V - Display Some Configuration And Profile
LE910Cx AT Commands Reference Guide 3.2.2.7. AT&V - Display some Configuration and Profile The command displays some of the basic modem configuration settings and parameters SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT&V Execution command returns some of the basic modem configuration settings and parameters, one for each row, in the format: setting/parameter : value...
Page 121 LE910Cx AT Commands Reference Guide Example of returned values. • AT&V COMMAND ECHO : E1=YES RESULT MESSAGES : Q0=YES VERBOSE MESSAGES : V1=YES EXTENDED MESSAGES : X1=YES LINE SPEED : F0=autodetect CONSTANT DTE SPEED : YES FLOW CONTROL OPTIONS : &K3=HW bidirect. ERROR CORRECTION : RLP MODE...
Page 122: At\V - Single Line Connect Message
LE910Cx AT Commands Reference Guide 3.2.2.8. AT\V - Single Line Connect Message This command sets single line connect message. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT\V[<n>] Execution command sets single line connect message. Parameter: Name Type Default...
Page 123: At+Gci - Country Of Installation
LE910Cx AT Commands Reference Guide 3.2.2.9. AT+GCI - Country of Installation Set command allows to select the installation country code according to ITU-T35 Annex ITU-T Recommendation V.25 ter SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT+GCI=<code>...
Page 124: At%L - Line Signal Level
LE910Cx AT Commands Reference Guide 3.2.2.10. AT%L - Line Signal Level It has no effect and is included only for backward compatibility with landline modems. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required 80502ST10950A Rev. 14 Page 124 of 1904 2022-03-04 Not Subject to NDA...
Page 125: At%Q - Line Quality
LE910Cx AT Commands Reference Guide 3.2.2.11. AT%Q - Line Quality It has no effect and is included only for backward compatibility with landline modems SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required 80502ST10950A Rev. 14 Page 125 of 1904 2022-03-04 Not Subject to NDA...
Page 126: Atl - Speaker Loudness
LE910Cx AT Commands Reference Guide 3.2.2.12. ATL - Speaker Loudness It has no effect and is included only for backward compatibility with landline modems. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required ATL<n> Set command has no effect and is included only for backward compatibility with landline modems.
Page 127: Atm - Speaker Mode
LE910Cx AT Commands Reference Guide 3.2.2.13. ATM - Speaker Mode It has no effect and is included only for backward compatibility with landline modems. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required ATM=<n> Set command has no effect and is included only for backward compatibility with landline modems.
Page 128: At+Gcap - Capabilities List
LE910Cx AT Commands Reference Guide 3.2.2.14. AT+GCAP - Capabilities List This command returns the equipment supported command set list. ITU-T Recommendation V.25 ter SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT+GCAP Execution command returns the equipment supported command set list. Additional info: Supported Command Set: +CGSM: 3GPP TS command set...
Page 129: At+Gmi - Manufacturer Identification
LE910Cx AT Commands Reference Guide 3.2.2.15. AT+GMI - Manufacturer Identification This command returns the manufacturer identification. ITU-T Recommendation V.25 ter SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT+GMI Execution command returns the manufacturer identification followed by an <OK>...
Page 130: At+Gmm - Model Identification
LE910Cx AT Commands Reference Guide 3.2.2.16. AT+GMM - Model Identification The command returns the model identification. ITU-T Recommendation V.25 ter SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT+GMM The execution command returns the model identification followed by an <OK>...
Page 131: At+Gmr - Revision Identification
LE910Cx AT Commands Reference Guide 3.2.2.17. AT+GMR - Revision Identification The command returns the software revision identification. ITU-T Recommendation V.25 ter SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT+GMR Execution command returns the software revision identification followed by an <OK>...
Page 132: At+Ceer - Extended Error Report
LE910Cx AT Commands Reference Guide 3.2.2.18. AT+CEER - Extended Error Report Reports extended error related to the last unsuccessful call. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT+CEER Execution command returns one or more lines of information text <report>...
Page 133: At+Gsn - Serial Number
LE910Cx AT Commands Reference Guide 3.2.2.19. AT+GSN - Serial Number This command reports the device board serial number. ITU-T Recommendation V.25 ter SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT+GSN[=<snt>] Execution command returns the device board serial number. The number returned is not the IMSI, but it is the board number.
Page 134 LE910Cx AT Commands Reference Guide <imeisv> - International Mobile station Equipment Identity and Software Version number; The 16 digits of IMEISV are composed of Type Allocation Code (TAC) (8 digits), Serial Number (SNR) (6 digits) and the software version (SVN) (2 digits). <svn>...
Page 135: At+Cgmi - Request Manufacturer Identification
LE910Cx AT Commands Reference Guide 3.2.2.20. AT+CGMI - Request Manufacturer Identification The command returns device manufacturer identification code. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT+CGMI Execution command returns the device manufacturer identification code followed by an OK at newline.
Page 136: At+Cgmm - Request Model Identification
LE910Cx AT Commands Reference Guide 3.2.2.21. AT+CGMM - Request Model Identification This command returns the device model identification. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT+CGMM Execution command returns the device model identification code followed by an OK at newline.
Page 137: At+Cgmr - Request Revision Identification
LE910Cx AT Commands Reference Guide 3.2.2.22. AT+CGMR - Request Revision Identification The command returns device software revision number. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT+CGMR Execution command returns device software revision number followed by an OK at newline.
Page 138: At+Cgsn - Request Product Serial Number Identification
LE910Cx AT Commands Reference Guide 3.2.2.23. AT+CGSN - Request Product Serial Number Identification This command allows to retrieve the product serial number in form of IMEI of the mobile. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT+CGSN[=<snt>]...
Page 139 LE910Cx AT Commands Reference Guide <imeisv> - International Mobile station Equipment Identity and Software Version number; The 16 digits of IMEISV are composed of Type Allocation Code (TAC) (8 digits), Serial Number (SNR) (6 digits) and the software version (SVN) (2 digits). <svn>...
Page 140: At#Cgmi - Request Manufacturer Identification
LE910Cx AT Commands Reference Guide 3.2.2.24. AT#CGMI - Request Manufacturer Identification The command returns device manufacturer identification code. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#CGMI Execution command returns the device manufacturer identification code, with command echo. The response is as follows <code>...
Page 141: At#Cgmr - Request Revision Identification
LE910Cx AT Commands Reference Guide 3.2.2.25. AT#CGMR - Request Revision Identification The command returns device software revision number. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#CGMR Execution command returns device software revision number, with command echo. The response is as follows #CGMR: <num>...
Page 142: At#Cgsn - Product Serial Number Identification
LE910Cx AT Commands Reference Guide 3.2.2.26. AT#CGSN - Product Serial Number Identification This command returns the product serial number, identified as the IMEI of the mobile, with command echo. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#CGSN[=[<snt>]] Execution command returns the product serial number, identified as the IMEI of the mobile, with command echo.
Page 143 LE910Cx AT Commands Reference Guide Type Allocation Code (TAC) (8 digits), Serial Number (SNR) (6 digits) and the software version (SVN) (2 digits). <svn> - Software Version Number AT#CGSN=? The test command returns supported <snt> values. AT#CGSN #CGSN: 358677008900540 80502ST10950A Rev. 14 Page 143 of 1904 2022-03-04 Not Subject to NDA...
Page 144: At#Swpkgv - Request Software Package Version
LE910Cx AT Commands Reference Guide 3.2.2.27. AT#SWPKGV - Request Software Package Version This command allows to retrieve the software package version. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#SWPKGV Execution command returns the software package version without #SWPKGV: command echo.
Page 145: At+Cpas - Phone Activity Status
LE910Cx AT Commands Reference Guide 3.2.2.28. AT+CPAS - Phone Activity Status Execution command reports the device status in the form shown in Additional info section. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT+CPAS Additional info: Message format returned by the execution command:...
Page 146 LE910Cx AT Commands Reference Guide 4 : call in progress (device is ready for commands from TA/TE, but a call is in progress) '1' and '2' at <pas> is not supported. In the LTE registration state, CPAS: 4 (call in progress) is displayed.
Page 147: At+Cfun - Set Phone Functionality
LE910Cx AT Commands Reference Guide 3.2.2.29. AT+CFUN - Set Phone Functionality This command selects the level of functionality in the ME. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT+CFUN=[<fun>[,<rst>]] Set command selects the level of functionality in the ME. Parameters: Name Type...
Page 148 LE910Cx AT Commands Reference Guide <rst> integer reset flag Values: 0 : do not reset the ME before setting it to <fun> functionality level. 1 : reset the ME before setting it to <fun> functionality level, this option works only with <fun> =1, with other it will return an error Additional info: <fun>=0...
Page 149 LE910Cx AT Commands Reference Guide If power saving mechanism enabled, it reduces the power consumption during the idle time, thus allowing a longer standby time with a given battery capacity. To place the module in power saving mode, plug out the USB, set the DTR (RS232) line to OFF and set CFUN to 5.
Page 150: At+Cind - Indicator Control
LE910Cx AT Commands Reference Guide 3.2.2.30. AT+CIND - Indicator Control This command is used to control the registration state of modem indicators. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT+CIND=[<state>[,<state[,...]]] Set command is used to control the registration state of ME indicators, in order to automatically send the +CIEV URC, whenever the value of the associated indicator changes.
Page 151 LE910Cx AT Commands Reference Guide AT+CIND? Read command returns the current value of ME indicators, in the format: +CIND: <ind>,<ind>,...<ind> the order of the values <ind>s is the same as that in which the associated indicators appear from test command AT+CIND=?. AT+CIND=? Test command returns pairs, where string value <descr>...
Page 152 LE910Cx AT Commands Reference Guide error rate (<ber>) in +CSQ command "service" : service availability; indicator <ind> is 0 (not registered to any network) or 1 (registered) "sounder" : sounder activity; indicator <ind> is 0 (no sound activity) or 1 (sound activity) "message"...
Page 153 LE910Cx AT Commands Reference Guide service) or 1 (module attached to a packet service) "callsetup" : call setup status indicator; indicator <ind> values are 0 (no active call setup), 1 (MT call is ringing), 2 (MO call was initiated), 3 (MO call ringing at called party) Next command causes all the indicators to be registered AT+CIND=1,1,1,1,1,1,1,1,1...
Page 154: At+Cmer - Mobile Equipment Event Reporting
LE910Cx AT Commands Reference Guide 3.2.2.31. AT+CMER - Mobile Equipment Event Reporting This command configures sending of unsolicited result codes from TA to TE. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT+CMER=[<mode>[,<keyp>[,<disp>[,<ind>[,<bfr>]]]]] Set command enables/disables sending of unsolicited result codes from TA to TE in the case of indicator state changes.
Page 155 LE910Cx AT Commands Reference Guide mode (after +++ was entered), all URCs stored in the buffer will be output <keyp> integer keypad event reporting Value: 0 : No keypad event reporting <disp> integer display event reporting Value: 0 : no display event reporting <ind>...
Page 156 LE910Cx AT Commands Reference Guide compatibility. Values shown by the indicators will be current indicators values, not buffered ones. Subsequent +CMER commands with <mode> different from 0 and <bfr> equal to 0 will not flush the codes, even if <mode> was set again to 0 before. To flush the codes, <bfr>...
Page 157: At+Cacm - Accumulated Call Meter
LE910Cx AT Commands Reference Guide 3.2.2.32. AT+CACM - Accumulated Call Meter This command resets the Advice of Charge related Accumulated Call Meter (ACM) value in SIM card or in the active application in the UICC. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout...
Page 158 LE910Cx AT Commands Reference Guide Name Type Default Description <acm> string accumulated call meter value similarly coded as <ccm> under +CAOC; three bytes of the ACM value in hexadecimal format (e.g. "00001E" indicates decimal value 30) The value <acm> is in home units; price per unit and currency are defined with command +CPUC.
Page 159: At+Camm - Accumulated Call Meter Maximum
LE910Cx AT Commands Reference Guide 3.2.2.33. AT+CAMM - Accumulated Call Meter Maximum This command sets the Advice of Charge related to accumulated call meter maximum (ACMmax) value stored in SIM. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required...
Page 160 LE910Cx AT Commands Reference Guide AT+CAMM=? Test command returns the OK result code. 80502ST10950A Rev. 14 Page 160 of 1904 2022-03-04 Not Subject to NDA...
Page 161: At+Cpuc - Price Per Unit And Currency Table
LE910Cx AT Commands Reference Guide 3.2.2.34. AT+CPUC - Price per Unit and Currency Table This command sets the values of Price per Unit and Currency Table. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CPUC=<currency>,<ppu>[,<pwd>] Set command sets the values of Advice of Charge related Price per Unit and Currency Table (PUCT) stored in SIM.
Page 162 LE910Cx AT Commands Reference Guide +CPUC: <currency>,<ppu> AT+CPUC=? Test command returns the OK result code. 80502ST10950A Rev. 14 Page 162 of 1904 2022-03-04 Not Subject to NDA...
Page 163: At+Ccwe - Call Meter Maximum Event
LE910Cx AT Commands Reference Guide 3.2.2.35. AT+CCWE - Call Meter Maximum Event This command is used to enable/disable sending of an unsolicited result code +CCWV. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Specific profile AT+CCWE=<mode>...
Page 164 LE910Cx AT Commands Reference Guide Read command reports the currently selected <mode> in the format: +CCWE: <mode> AT+CCWE=? Test command reports the supported range of values for parameter <mode>. 80502ST10950A Rev. 14 Page 164 of 1904 2022-03-04 Not Subject to NDA...
Page 165: At+Csvm - Set Voice Mail Number
LE910Cx AT Commands Reference Guide 3.2.2.36. AT+CSVM - Set Voice Mail Number Command to set voice mail server number. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Specific profile AT+CSVM=<mode>[,<number>[,<type>]] Set command is dummy. It only checks for parameters values validity; it does not send any actual write request to SIM to update voice mail number, nor sends any request to network to enable/disable voice mail.
Page 166 LE910Cx AT Commands Reference Guide AT+CSVM? Read command returns the currently selected voice mail number and the status (i.e. enabled/disabled) in the format +CSVM:<mode>,<number>,<type> AT+CSVM=? Test command reports the range for the parameters <mode> and <type>. 80502ST10950A Rev. 14 Page 166 of 1904 2022-03-04 Not Subject to NDA...
Page 167: At#Mbn - Mailbox Numbers
LE910Cx AT Commands Reference Guide 3.2.2.37. AT#MBN - Mailbox Numbers This command returns the mailbox numbers stored on SIM. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT#MBN Execution command returns the mailbox numbers stored on SIM, if this service is provided by the SIM.
Page 168 LE910Cx AT Commands Reference Guide character set should be the one selected with command +CSCS <mboxtype> string the message waiting group type of the mailbox, if available Values: VOICE : voice : fax EMAIL : electronic mail OTHER : other If all queried locations are empty (but available), no information text lines will be returned.
Page 169: At#Mwi - Message Waiting Indication
LE910Cx AT Commands Reference Guide 3.2.2.38. AT#MWI - Message Waiting Indication This command enables/disables the presentation of the Message Waiting Indicator (MWI) URC. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Specific profile AT#MWI=[<enable>] Set command enables/disables the presentation of the Message Waiting Indicator URC, it can have two formats, as show in Additional info.
Page 170 LE910Cx AT Commands Reference Guide - The module is powered on, the URC reports the status of the message waiting indicators, as they are currently stored on SIM, the format is: #MWI: <status>[,<indicator>[,<count>][<CR><LF> #MWI: <status>,<indicator>[,<count>][...]]] The parameters are described in the unsolicited fields section for each URC format.
Page 171 LE910Cx AT Commands Reference Guide Values: 1 : either Line 1 (CPHS context) or Voice (3GPP context) 2 : Line 2 (CPHS context only) 3 : Fax 4 : E-mail 5 : Other <count> integer network information reporting the number of pending messages related to the message waiting indicator <indicator>.
Page 172: At+Clac - Available At Commands
LE910Cx AT Commands Reference Guide 3.2.2.39. AT+CLAC - Available AT Commands This command shows the available AT commands list. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CLAC The execution command causes the ME to return one or more lines reporting the AT commands that are available to the user.
Page 173: At#Lang - Select Language
LE910Cx AT Commands Reference Guide 3.2.2.40. AT#LANG - Select Language Set command selects the currently used language for displaying different messages. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#LANG=<lan> Parameter: Name Type Default Description <lan> string selected language Values:...
Page 174: At+Cmee - Report Mobile Equipment Error
LE910Cx AT Commands Reference Guide 3.2.2.41. AT+CMEE - Report Mobile Equipment Error The command enables the use of result code. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT+CMEE=[<n>] Set command disables/enables the use of result code: +CME ERROR: <err>...
Page 175 LE910Cx AT Commands Reference Guide +CMEE has no effect on the final result code +CMS. AT+CMEE? Read command returns the current value of parameter <n> in the format: +CMEE: <n> AT+CMEE=? Test command returns the supported values of parameter <n>. 80502ST10950A Rev.
Page 176: At#Ceerurc - Extended Error Report Unsolicited Response
LE910Cx AT Commands Reference Guide 3.2.2.42. AT#CEERURC - Extended Error Report Unsolicited Response This command enable/disable the +CEER URC SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#CEERURC=<mode> Set command enable/disable the +CEER URC presentation regards some error condition that may occur.
Page 177: At#Overridepdp - Set The Default Pdp Type For Lte In Home Network Or Roaming Network
LE910Cx AT Commands Reference Guide 3.2.2.43. AT#OVERRIDEPDP - Set the default PDP type for LTE in home network or roaming network Set the default PDP type for LTE in home network or roaming network. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required...
Page 178 LE910Cx AT Commands Reference Guide "IPV6" : Internet Protocol version 6 "IPV4V6" : Virtual <PDP_type> introduced to handle dual IP stack UE capability "MAX" : Nothing is configured (IP or IPV6 or IPV4V6 according to +CGDCONT) Manual reboot is required after changing. Predefined default PDP type is dependent according to operator requirement.
Page 179 LE910Cx AT Commands Reference Guide A few operators require that the devices need to bring up PDN connections with the PDP type set as IPv6 or IP according to network type. Profile 4 config to IPV6 only for LTE in home network and IP only for LTE in roaming network.
Page 180 LE910Cx AT Commands Reference Guide AT#REBOOT 80502ST10950A Rev. 14 Page 180 of 1904 2022-03-04 Not Subject to NDA...
Page 181: At#Ensshd - Enable/Disable The Sshd Daemon
LE910Cx AT Commands Reference Guide 3.2.2.44. AT#ENSSHD - Enable/disable the SSHD daemon This command is used to enable/disable the SSHD daemon. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#ENSSHD=<mode> Set Command to enable/disable the SSHD daemon. Parameter: Name Type...
Page 182 LE910Cx AT Commands Reference Guide AT#ENSSHD=? Test command reports the supported range of values SSHD is the OpenSSH server process at Module internal AP. It listens to incoming connections using the SSH protocol and acts as the server for the protocol.
Page 183: At#Hwrev - Hardware Identification
LE910Cx AT Commands Reference Guide 3.2.2.45. AT#HWREV - Hardware Identification This command returns the device Hardware revision identification code. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#HWREV Execution command returns the device Hardware revision identification code without command echo.
Page 184: At#Trace - Enable/Disable Trace
LE910Cx AT Commands Reference Guide 3.2.2.46. AT#TRACE - Enable/Disable Trace The command selects which trace outputs you want to display through the debugging tool. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#TRACE=[<mode>[,<configurationString>]] Parameters: Name Type Default Description <mode>...
Page 185 LE910Cx AT Commands Reference Guide Name Type Default Description <unit> string trace class name available to the user to select the trace output. On the right side of each name, in lower case characters, there is the TC_XXX... string (Trace Class name) shown by the debugging tool.
Page 186 LE910Cx AT Commands Reference Guide : TC_NV : TC_RTC m2m_uart : TC_UART power : TC_POWER ftpc : TC_FTPC : TC_ATI backup : TC_BACKUP nipd : TC_NIPD : TC_SYS : TC_PSM : TC_SSL <umode> string enables/disables the trace output selected Values: 0 : disables 1 : enables AT#TRACE?
Page 187 LE910Cx AT Commands Reference Guide Here are some examples: • Set all trace outputs OFF AT#TRACE=0 Set all trace outputs ON AT#TRACE=1 Enable/disable trace outputs selected AT#TRACE=,"generic=1,clock=0,lwm2m=1,pdp=0,gnss=0,ati=0" 80502ST10950A Rev. 14 Page 187 of 1904 2022-03-04 Not Subject to NDA...
Page 188: At#Dhcpv6Delegation - Dhcpv6 Delegation Mode Set
LE910Cx AT Commands Reference Guide 3.2.2.47. AT#DHCPV6DELEGATION - DHCPV6 Delegation Mode Set DHCPv6 Delegation Mode Set SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT#DHCPV6DELEGATION=<cid>,<mode> Set command specifies the DHCPv6 delegation mode on profile. Parameters: Name Type Default Description...
Page 189 LE910Cx AT Commands Reference Guide #DHCPV6DELEGATION: <cid>,<mode> #DHCPV6DELEGATION: <cid>,<mode> AT#DHCPV6DELEGATION=? Test command returns the range of supported values for parameter. 80502ST10950A Rev. 14 Page 189 of 1904 2022-03-04 Not Subject to NDA...
Page 190: At#Psmri - Power Saving Mode Ring Indicator
LE910Cx AT Commands Reference Guide 3.2.2.48. AT#PSMRI - Power Saving Mode Ring Indicator The command enables or disables the Ring Indicator pin response to an URC message while modem is in power saving mode. SIM Presence Setting saved Can be aborted MAX timeout SELINT Common...
Page 191 LE910Cx AT Commands Reference Guide #PSMRI: <n> AT#PSMRI=? Test command reports the supported range of values for parameter <n> When RING signal for incoming call/SMS/socket listen is enabled, the behavior for #PSMRI will be ignored. 80502ST10950A Rev. 14 Page 191 of 1904 2022-03-04 Not Subject to NDA...
Page 192: At+Cscs - Select Te Character Set
LE910Cx AT Commands Reference Guide 3.2.2.49. AT+CSCS - Select TE Character Set This command sets character-set used by the device. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Specific profile AT+CSCS=[<chset>] Set command sets character-set used by the device. Parameter: Name Type...
Page 193 LE910Cx AT Commands Reference Guide AT+CSCS=? Test command returns the supported values for parameter <chset>. 80502ST10950A Rev. 14 Page 193 of 1904 2022-03-04 Not Subject to NDA...
Page 194: At#Cscsext - Select Gsm Hexadecimal Representation
LE910Cx AT Commands Reference Guide 3.2.2.50. AT#CSCSEXT - Select GSM Hexadecimal Representation Set commands enable/disable the hexadecimal characters representation. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Specific profile AT#CSCSEXT=<mode> Set commands enable/disable the hexadecimal characters representation while character set, one selected with +CSCS, is GSM.
Page 195 LE910Cx AT Commands Reference Guide AT+CSCS=? +CSCS: ("GSM","IRA","8859-1","PCCP437","UCS2") AT+CSCS="GSM" AT#CSCSEXT? #CSCSEXT: 0 AT+CPBW=1,"8475763000",129,"Lin Zhao" AT+CPVR=1 +CPBR: 1,"8475763000",129,"Lin Zhao","","",0,"","" AT+CMGW=8475763000 > test #CSCSEXT +CMGW: 8 AT+CMGR=8 +CMGR: "STO UNSENT","8475763000","Lin Zhao" test #CSCSEXT AT#CSCSEXT=1 AT+CPBR=1 +CPBR: 1,"8475763000",129,004C006E006E0020005A00680061006F AT+CMGR=8 +CMGR: "STO UNSENT","38343735373633303030","004C006E006E0020005A00680061006F" 7465737420234353435345585420 80502ST10950A Rev.
Page 196: At+Pacsp - Network Selection Menu Availability
LE910Cx AT Commands Reference Guide 3.2.2.51. AT+PACSP - Network Selection Menu Availability This command returns the current value of the <mode> parameter which is PLMN mode bit in the CSP file with SIM. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required...
Page 197 LE910Cx AT Commands Reference Guide Test command returns the OK result code. 80502ST10950A Rev. 14 Page 197 of 1904 2022-03-04 Not Subject to NDA...
Page 198: At+Cmux - Multiplexing Mode
LE910Cx AT Commands Reference Guide 3.2.2.52. AT+CMUX - Multiplexing Mode This command is used to enable/disable the multiplexing protocol control channel. GSM 07.07, GSM 07.10 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT+CMUX=<mode>[,<subset>[,<port_speed>[,<N1>]]] Set command is used to enable/disable the multiplexing protocol control channel.
Page 199 LE910Cx AT Commands Reference Guide 2 : 19200 bps 3 : 38400 bps 4 : 57600 bps 5 : 115200 bps 6 : 230400 bps <N1> integer maximum frame size Value: 1÷1500 : maximum frame size Additional info: For models with the M2M AT Parser support, two command sets are provided depending on the activation status of the M2M AT Parser.
Page 200 LE910Cx AT Commands Reference Guide Note: the Length Indicator of the information field is fixed to 1 octet. Note: E/A Bit of the Length Indicator should be set to 1 (length <= 127). AT+CMUX? Read command returns the current value of <mode> and <subset> parameters, when M2M AT Parser disabled (AT#M2MATP=0) or M2M AT Parser not supported model in the format: +CMUX: <mode>,<subset>...
Page 201: At#Cmuxmode - Cmux Mode Set
LE910Cx AT Commands Reference Guide 3.2.2.53. AT#CMUXMODE - CMUX Mode Set The module is equipped with the CMUX standard protocol to provide multiplexing features. The #CMUXMODE command configures the CMUX behavior concerning the DTR control line, and the size of the internal output CMUX buffer. 3GPP TS 27.010 SIM Presence Setting saved...
Page 202 LE910Cx AT Commands Reference Guide Note: DLC establishment on Virtual Channel between mode 0 and mode 1 is different. See Telit Multiplxer SW User Guide for the detailed information Note: a software or hardware reset restores the default value. Note: during cmux session the set command will return ERROR, only the read and test command can be used.
Page 203: At#Usbcfg - Usb Configuration
LE910Cx AT Commands Reference Guide 3.2.2.54. AT#USBCFG - USB Configuration USB Composition Configuration SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#USBCFG=<composition> Set the USB composition Parameter: Name Type Default Description <composition> integer Composition number for each PID. Refer to an 'Additional info' chapter for detailed composition number.
Page 204 LE910Cx AT Commands Reference Guide 0x125 MBIM+NMEA+MODEM+MODEM+SAP 0x125 ECM+NMEA+MODEM+MODEM+SAP 0x125 MODEM+MODEM 0x125 NMEA+MODEM+MODEM+SAP 0x123 DIAG+ADB+RmNet+AUDIO+NMEA+MODEM+MODEM+S 0x123 RNDIS+DIAG+ADB+AUDIO+NMEA+MODEM+MODEM+S 0x126 DIAG+ADB+RmNet+NMEA+MODEM+MODEM+SAP 0x126 DIAG+ADB+RmNet+NMEA+MODEM+MODEM+SAP 0x126 DIAG+ADB+RmNet+NMEA+MODEM+MODEM+AUX LE910Cx ThreadX Products: Composition Functions 0x1031 DIAG+MODEM+MODEM+RmNet 0x1033 DIAG+MODEM+MODEM+ECM 0x1034 MODEM+MODEM+RmNet 0x0135 MODEM+MODEM+ECM 0x1036 MODEM+MODEM 0x1037 DIAG+SER+MODEM+MODEM+RmNet 0x1038 SER+MODEM+MODEM+RmNet The modem device is reset automatically, and new USB composition applied from the next boot up time.
Page 205 LE910Cx AT Commands Reference Guide If the new composition was set successfully the command will return OK. If composition settings failed the command will return error. Default value for USB composition is 0x1201, AT#USBCFG? will return 0 by default. If USBCFG is 3, it is MBIM only mode. For that reason, you can't change the USB composition.
Page 206 LE910Cx AT Commands Reference Guide 0x1201 composition file returns 0 0x1203 composition file returns 1 0x1204 composition file returns 2 0x1205 composition file returns 3 0x1206 composition file returns 4 0x1250 composition file returns 5 0x1251 composition file returns 6 0x1252 composition file returns 7 0x1253 composition file returns 8 0x1254 composition file returns 9...
Page 207: At#Excepinfo - Read Exception Information
LE910Cx AT Commands Reference Guide 3.2.2.55. AT#EXCEPINFO - Read exception information This command reports the stored exception information. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#EXCEPINFO=<index> Write command for clear the stored exception information. All the stored information will be cleared if this command entered.
Page 208 LE910Cx AT Commands Reference Guide <msg>: String type, stored exception message information. The exception information will be stored up to 5 and will be deleted from the old one when there is new exception. If the exception triggered before module get the time information from network, the <date>...
Page 209: At#Resetinfo - Read Reason For Most Recent Devices Reset Or Power-Down
LE910Cx AT Commands Reference Guide 3.2.2.56. AT#RESETINFO - Read reason for most recent devices reset or power-down This command used to get RESET INFO that has reason for most recent devices reset. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#RESETINFO...
Page 210: At#Portcfg - Connect Physical Ports To Service Access Points
LE910Cx AT Commands Reference Guide 3.2.2.57. AT#PORTCFG - Connect Physical Ports to Service Access Points This command allows to connect Service Access Points (software anchorage points) to the external physical ports. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto...
Page 211 LE910Cx AT Commands Reference Guide AT#PORTCFG? Read command returns the requested and the active port configuration in the format: #PORTCFG: <requested>,<active> Additional info: Parameters returned by the read command, in format: #PORTCFG: <requested>,<active> Name Type Default Description <requested> integer value showing the requested configuration that will be activated on the next power ON.
Page 212 LE910Cx AT Commands Reference Guide #PORTCFG: Variant=17: AT= USIF0 USB0 USB1; SPI= USIF1 The <Variant> range depends on the product. 80502ST10950A Rev. 14 Page 212 of 1904 2022-03-04 Not Subject to NDA...
Page 213: At#Atdelay - At Command Delay
LE910Cx AT Commands Reference Guide 3.2.2.58. AT#ATDELAY - AT Command Delay This command sets a delay in second for the execution of successive AT command. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#ATDELAY=<delay> Set command sets a delay in second for the execution of successive AT command.
Page 214 LE910Cx AT Commands Reference Guide Set 5 seconds delay for "AT#GPIO=1,1,1" command AT#GPIO=1,0,1;#ATDELAY=50;#GPIO=1,1,1 80502ST10950A Rev. 14 Page 214 of 1904 2022-03-04 Not Subject to NDA...
Page 215: At#Cmar - Selective Master Reset
LE910Cx AT Commands Reference Guide 3.2.2.59. AT#CMAR - Selective Master Reset This AT command is used to reset user data to factory default on Modem NV and AP AppZone file system. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#CMAR=<unused>[,<resetType>]...
Page 216 LE910Cx AT Commands Reference Guide This command will just reset user files in "/mod" directory for AP AppZone file system. After the execution is done, the module will automatically reboot. AT#CMAR=? Test command returns <unused> value and <resetType> values. 80502ST10950A Rev. 14 Page 216 of 1904 2022-03-04 Not Subject to NDA...
Page 217: At&Z - Store Telephone Number In The Internal Phonebook
LE910Cx AT Commands Reference Guide 3.2.2.60. AT&Z - Store Telephone Number in the Internal Phonebook The command stores a telephone number in the internal phonebook. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT&Z<n>=<nr> Execution command stores the telephone number <nr> in the record <n>. Parameters: Name Type...
Page 218: At&N - Display Internal Phonebook Stored Numbers
LE910Cx AT Commands Reference Guide 3.2.2.61. AT&N - Display Internal Phonebook Stored Numbers The command displays telephone numbers stored in the internal phonebook. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT&N[<n>] Execution command returns the telephone number stored at the <n> position in the internal memory.
Page 219: At#Z - Extended Reset
LE910Cx AT Commands Reference Guide 3.2.2.62. AT#Z - Extended Reset This command loads both base section and extended section. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#Z=<profile> Set command loads both base section and extended section of the specified user profile stored with AT&P.
Page 220: At&V2 - Display Last Connection Statistics
LE910Cx AT Commands Reference Guide 3.2.2.63. AT&V2 - Display Last Connection Statistics The command displays last connection statistics. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT&V2 Execution command returns the last connection statistics and connection failure reason. Example of connection statistics get with no connection and no error.
Page 221: At#Imeisv - Request Imei And Software Version Number
LE910Cx AT Commands Reference Guide 3.2.2.64. AT#IMEISV - Request IMEI and Software Version Number This command returns the International Mobile Station Equipment Identity and Software Version Number. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#IMEISV Execution command returns the International Mobile Station Equipment Identity and Software Version Number, identified as the IMEISV of the module.
Page 222: At&V0 - Display Current Configuration And Profile
LE910Cx AT Commands Reference Guide 3.2.2.65. AT&V0 - Display Current Configuration and Profile The command displays current modem configuration and profile. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT&V0 Execution command returns all the modem configuration parameters settings.
Page 223: At#Fwswitch - Set Active Firmware Image
LE910Cx AT Commands Reference Guide 3.2.2.66. AT#FWSWITCH - Set Active Firmware Image Set command allows enabling one configuration of the firmware configurations embedded on product. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#FWSWITCH=<net_conf>[,<storage_conf>[,<restore_user_conf>]] Set command allows enabling one configuration of the firmware configurations embedded on product.
Page 224 LE910Cx AT Commands Reference Guide <restore_user_conf> integer backup current user config and restore new user config Values: 0 : After reboot, new network config restored 1 : Backup current user config and after reboot, new user config and network config restored Additional info: <net_conf>...
Page 225 LE910Cx AT Commands Reference Guide This AT command is available on LE910Cx-NF, LE910Cx-AP, LE910Cx-CN, LE910C1-NS, LE910Cx-WWX and LE910Cx-AP (SW version 25.20.28x and 25.20.68x). Especially, LE910C1-AP only for Telstra config don't support this AT command. This AT command performs a system reboot and factory restore. <storage_conf>...
Page 226 LE910Cx AT Commands Reference Guide AT#FWSWITCH=? Test command reports the range of supported values for parameters <configNum>, <storageNum>, <restore_user_conf>. Switch to configuration 1-VZW: AT#FWSWITCH =1 Store current user config - 0 for network config 0 - AT&T, and restore user config - 1 on new newwork config 1 - VZW on next boot time: AT#FWSWITCH =1,0,1 80502ST10950A Rev.
Page 227: At#Fwautosim - Automatic Carrier Switch By Sim
LE910Cx AT Commands Reference Guide 3.2.2.67. AT#FWAUTOSIM - Automatic Carrier Switch By SIM This command is the functionality for automatic carrier switch by SIM. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#FWAUTOSIM=<mode> Set command sets automatic carrier switch enable mode by SIM. Parameter: Name Type...
Page 228 LE910Cx AT Commands Reference Guide Additional info: automatic carrier switch mode by SIM Name Type Default Description <mode> integer automatic carrier switch mode by Values: 0 : Disable automatic carrier switch by SIM 1 : Enable automatic carrier switch by SIM 2 : Enable one-shot automatic carrier switch by 3 : Waiting enable one-shot automatic carrier switch by SIM...
Page 229: At#Secifcfg - Secure Interface Configuration
LE910Cx AT Commands Reference Guide 3.2.2.68. AT#SECIFCFG - Secure Interface Configuration This command allows to set the interface secured and non-secured. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#SECIFCFG=<sec_mask>,<pwd> Set command set the interface secured and non-secured. Parameters: Name Type...
Page 230 LE910Cx AT Commands Reference Guide Need to reboot for new configuration. Default password is "0123456789". AT#SECIFCFG? Read command returns the values in the following format: #SECIFCFG: <sec_mask> 0 : No secure interface (No secure on all interface : default) 1 : Serial AT interface (secure AT access via USB, UART) 2 : Remote AT interface (secure AT access via TCP/IP, SMS) 3 : Serial and Remote AT interface (Secure AT access via USB, UART, TCP/IP, SMS)
Page 231: At#Secifauth - Secure Interface Authentication
LE910Cx AT Commands Reference Guide 3.2.2.69. AT#SECIFAUTH - Secure Interface Authentication This command will be gotten an authentication with password. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#SECIFAUTH=<pwd> This command will be gotten an authentication with password. Parameter: Name Type...
Page 232 LE910Cx AT Commands Reference Guide Test command returns the range of supported values for all the parameters. AT#SECIFAUTH=? #SECIFAUTH: (10-16) 80502ST10950A Rev. 14 Page 232 of 1904 2022-03-04 Not Subject to NDA...
Page 233: At#Secifpwd - Secure Interface Password
LE910Cx AT Commands Reference Guide 3.2.2.70. AT#SECIFPWD - Secure Interface Password This command can change authentication password. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#SECIFPWD=<old_pwd>,<new_pwd>,<new_pwd> This command can change authentication password. New password needs twice with the same value.
Page 234 LE910Cx AT Commands Reference Guide 80502ST10950A Rev. 14 Page 234 of 1904 2022-03-04 Not Subject to NDA...
Page 235: At#Clatena - Enable/Disable The Clat Interface
LE910Cx AT Commands Reference Guide 3.2.2.71. AT#CLATENA - Enable/Disable the CLAT interface Enable/Disable the CLAT interface. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT#CLATENA=<cid>,<enable> This command is used to enable/disable the Modem CLAT(Customer-side Address Translator) functionality to support communication to IPv4 servers on IPv6 only cellular networks.
Page 236 LE910Cx AT Commands Reference Guide #CLATENA: <cid>,<enable> AT#CLATENA=? Test command returns values supported as a compound value. AT#CLATENA=1,1 AT#CLATENA? #CLATENA: 1,1 #CLATENA: 2,0 #CLATENA: 3,0 80502ST10950A Rev. 14 Page 236 of 1904 2022-03-04 Not Subject to NDA...
Page 237: At#Cqi - Hsdpa Channel Quality Indication
LE910Cx AT Commands Reference Guide 3.2.2.72. AT#CQI - HSDPA Channel Quality Indication This command returns the channel quality indication of the <mode> parameter which is PLMN mode bit in the CSP file with SIM. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required...
Page 238 LE910Cx AT Commands Reference Guide Test command returns the supported range of values of the parameter <cqi>. Will only work while socket is open and data transfer is active. Working only with UTRAN and E-UTRAN (see +WS46). 80502ST10950A Rev. 14 Page 238 of 1904 2022-03-04 Not Subject to NDA...
Page 239: At#Frattrigger - Configure Frat Trigger Parameter
LE910Cx AT Commands Reference Guide 3.2.2.73. AT#FRATTRIGGER - Configure FRAT Trigger parameter This command sets the parameter needed to trigger the FRAT. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#FRATTRIGGER=<gpio_pin>[,<trigger_value>] This command sets the parameter needed to trigger the FRAT. Parameters: Name Type...
Page 240 LE910Cx AT Commands Reference Guide <gpio_pin> default is 0. <trigger_value> default is 1. <trigger_value> will reset to default in each power up. It can support only AT&T specific module. AT#FRATTRIGGER? Read command returns the current settings for the frat trigger: #FRATTRIGGER: <gpio_pin>,<trigger_value>...
Page 241: At#Pdpauth - Pdp Authentication Parameters
LE910Cx AT Commands Reference Guide 3.2.2.74. AT#PDPAUTH - PDP Authentication Parameters This set command specifies PDP authentication parameters values for a PDP context identified by the (local) context identification parameter <cid>. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto...
Page 242 LE910Cx AT Commands Reference Guide AT#PDPAUTH? Read command returns the PDP authentication parameters, excluding <password>, set for every PDP, in the format: #PDPAUTH: <cid1>,<auth_type1>,<username1><CR><LF> #PDPAUTH:<cidmax>,<auth_typemax>,<usernamemax><CR><LF>]] AT#PDPAUTH=? Test command reports the supported range of values for parameters <cid> and <auth_type> and the maximum allowed length of the string parameters <password>...
Page 243: At#Txcal4G - Change Max Tx Power Level For A Supported Band
LE910Cx AT Commands Reference Guide 3.2.2.75. AT#TXCAL4G - Change Max TX Power Level for a Supported Band This command changes the maximum power level for the specified band. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#TXCAL4G=<band>[,<txPwrLev>] Set command changes the tx power level for the specified band.
Page 244 LE910Cx AT Commands Reference Guide AT#TXCAL4G? Read command returns the bands supported and the maximum power level set for each band in the format: #TXCAL4G: <band>,<txPwrLev> #TXCAL4G: <band>,<txPwrLev> #TXCAL4G: <band>,<txPwrLev> #TXCAL4G: <band>,<txPwrLev> #TXCAL4G: <band>,<txPwrLev> AT#TXCAL4G=? Test command reports the supported range of parameters values. LTE band 71 doesn't support resolution dBm10.
Page 245: At#Txcal - Tx Calibration
LE910Cx AT Commands Reference Guide 3.2.2.76. AT#TXCAL - TX Calibration This command change the Tx power level for the band specified. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#TXCAL=<band>[,<value1>,<value2>,……<value16>] Set command change the Tx power level for the band specified. Parameters: Name Type...
Page 246 LE910Cx AT Commands Reference Guide #TXCAL: <value_1>,<value_2>,..,<value_16> #TXCAL: <value_1>,<value_2>,..,<value_16> AT#TXCAL=? Test command reports the supported range of parameters values. 80502ST10950A Rev. 14 Page 246 of 1904 2022-03-04 Not Subject to NDA...
Page 247: At#Cind - Indication Control Reader Indication
LE910Cx AT Commands Reference Guide 3.2.2.77. AT#CIND - Indication Control Reader Indication This command gets the Indicator Control for current values. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT#CIND? Read command returns the current values of +CIND, in the format. #CIND: <cind_ind>,<cind_ind>,…<cind_ind>...
Page 248 LE910Cx AT Commands Reference Guide Next command changed the +CIND values: AT+CIND=1,0,1,0,0,1,0,1,1,0,0 Next command to query the current value of all indicators: AT#CIND? #CIND:1,0,1,0,0,1,0,1,1,0,0 80502ST10950A Rev. 14 Page 248 of 1904 2022-03-04 Not Subject to NDA...
Page 249: At#Tid - Request Telit Id
LE910Cx AT Commands Reference Guide 3.2.2.78. AT#TID - Request Telit ID The command returns Telit ID and version number. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#TID Execution command returns device Telit ID and version number separated by a comma, followed by an OK at newline.
Page 250: At+Imeisv - Request Imei And Software Version Number
LE910Cx AT Commands Reference Guide 3.2.2.79. AT+IMEISV - Request IMEI and Software Version Number This command returns the International Mobile Station Equipment Identity and Software Version Number. 3GPP TS 23.003 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT+IMEISV Execution command returns the International Mobile Station Equipment...
Page 251: At#Cgmm - Request Model Identification
LE910Cx AT Commands Reference Guide 3.2.2.80. AT#CGMM - Request Model Identification This command returns the device model identification. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#CGMM Execution command returns the device model identification code, with command echo.
Page 252: At#Imspdpset - Sets Ims Pdp Apn Name
LE910Cx AT Commands Reference Guide 3.2.2.81. AT#IMSPDPSET - sets IMS Pdp APN Name This command sets IMS Pdp APN Name. This name should be one of the APN names set in +CGDCONT command and appropriated context will be opened for IMS. SIM Presence Setting saved Can be aborted...
Page 253: At#Fwtdeviceset - Set Fwt Device For Enabling 911 Calling
LE910Cx AT Commands Reference Guide 3.2.2.82. AT#FWTDEVICESET - Set FWT device for enabling 911 calling Set FWT device for enabling 911 calling. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT#FWTDEVICESET=<mode> This command is used to set FWT(Fixed Wireless Terminal) device for enabling 911 calling.
Page 254 LE910Cx AT Commands Reference Guide FWT devices are defined as LTE capable devices that allow users to make voice calls by connecting external devices (example: a landline telephone). AT#FWTDEVICESET? Read command reports whether FWT device for enabling 911 calling is currently enabled or not, in the format: #FWTDEVICESET: <mode>...
Page 255: At#Wkio - Set Ring Cfg Parameters
LE910Cx AT Commands Reference Guide 3.2.2.83. AT#WKIO - Set RING CFG Parameters This command configures the service. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT#WKIO=[<Mode>[,<Pin>[,<Trigger>[,<Timer>]]]] Set command configures the service. Parameters: Name Type Default Description <Mode>...
Page 256 LE910Cx AT Commands Reference Guide 2 : SMS Or CALL (default) <Timer> integer Set the time interval for the wakeup line to be at HIGH state range (1-60) Sec default 1 sec. Value: 1÷60 : sec To received Pulse in the ring line you need to set AT\R=2 and save profile (the ring wave shape will be Pulse only when call received).
Page 257 LE910Cx AT Commands Reference Guide AT#RINGCFG=1,1,2,1 80502ST10950A Rev. 14 Page 257 of 1904 2022-03-04 Not Subject to NDA...
Page 258: At#Cdorm - Dormant Control Command
LE910Cx AT Commands Reference Guide 3.2.2.84. AT#CDORM - Dormant control command Dormant control command SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT#CDORM=<action>[,<call_id>] Set command used to: 1. Enable/Disable the indication of dormant mode. 2. Fast dormancy 3.
Page 259 LE910Cx AT Commands Reference Guide When the indication is enabled, an unsolicited report with current status (dormant or active) per packet call will be sent to the DTE. Then, an update report sent to the DTE each time a change detected on status.
Page 260: At#Cgmf - Request Product Code
LE910Cx AT Commands Reference Guide 3.2.2.85. AT#CGMF - Request Product Code Execution command returns the device product parameter code SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#CGMF The command returns the following message: AT#CGMF <product parameter version> AT#CGMF=? Test command returns OK result code.
Page 261: S Parameters
LE910Cx AT Commands Reference Guide 3.2.3. S Parameters 3.2.3.1. ATS0 - Number of Rings to Auto Answer The command controls the automatic answering feature of the DCE. ITU-T Recommendation V.25 ter 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required...
Page 262 LE910Cx AT Commands Reference Guide ATS0? Read command returns the current value of S0 parameter. 80502ST10950A Rev. 14 Page 262 of 1904 2022-03-04 Not Subject to NDA...
Page 263: Ats1 - Ring Counter
LE910Cx AT Commands Reference Guide 3.2.3.2. ATS1 - Ring Counter S1 is incremented each time the device detects the ring signal of an incoming call. S1 is cleared as soon as no ring occur. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required...
Page 264: Ats2 - Escape Character
LE910Cx AT Commands Reference Guide 3.2.3.3. ATS2 - Escape Character The command manages the ASCII character used as escape character. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile ATS2=<char> Set command sets the ASCII character to be used as escape character. Parameter: Name Type...
Page 265: Ats3 - Command Line Termination Character
LE910Cx AT Commands Reference Guide 3.2.3.4. ATS3 - Command Line Termination Character The command manages the character configured as command line terminator. ITU-T Recommendation V.25 ter 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile ATS3=<char>...
Page 266 LE910Cx AT Commands Reference Guide ATS3? Read command returns the current value of S3 parameter. The format of the numbers in output is always 3 digits, left-filled with 0s 80502ST10950A Rev. 14 Page 266 of 1904 2022-03-04 Not Subject to NDA...
Page 267: Ats4 - Response Formatting Character
LE910Cx AT Commands Reference Guide 3.2.3.5. ATS4 - Response Formatting Character The command manages the character generated by the device as part of the header, trailer, and terminator for result codes and information text. ITU-T Recommendation V.25 ter 3GPP TS 27.007 SIM Presence Setting saved Can be aborted...
Page 268 LE910Cx AT Commands Reference Guide The format of the numbers in output is always 3 digits, left-filled with 0s. 80502ST10950A Rev. 14 Page 268 of 1904 2022-03-04 Not Subject to NDA...
Page 269: Ats5 - Command Line Editing Character
LE910Cx AT Commands Reference Guide 3.2.3.6. ATS5 - Command Line Editing Character The command manages the value of the character recognized by the DCE as a request to delete from the command line the immediately preceding character. ITU-T Recommendation V.25 ter 3GPP TS 27.007 SIM Presence Setting saved...
Page 270: Ats7 - Connection Completion Time-Out
LE910Cx AT Commands Reference Guide 3.2.3.7. ATS7 - Connection Completion Time-Out This set command specifies the amount of time that the DCE shall allow between either answering a call (automatically or by the ATA command) or completion of signaling of call addressing information to network (dialing), and establishment of a connection with the remote DCE.
Page 271 LE910Cx AT Commands Reference Guide ATS7? Read command returns the current value of S7 parameter. The format of the numbers in output is always 3 digits, left-filled with 0s. 80502ST10950A Rev. 14 Page 271 of 1904 2022-03-04 Not Subject to NDA...
Page 272: Ats8 - Comma Dial Modifier Time
LE910Cx AT Commands Reference Guide 3.2.3.8. ATS8 - Comma Dial Modifier Time This command sets comma dial modifier time. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile ATS8=[<time>] Set command sets the amount of time, in seconds, that the DCE shall pause, during signalling of call addressing information to the network (dialling), when a "P"...
Page 273: Ats10 - Carrier Off With Firm Time
LE910Cx AT Commands Reference Guide 3.2.3.9. ATS10 - Carrier Off with Firm Time The command is available only for backward compatibility SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile ATS10=<n> Set command has no effect and is available only for backward compatibility with landline modems.
Page 274: Ats12 - Escape Prompt Delay
LE910Cx AT Commands Reference Guide 3.2.3.10. ATS12 - Escape Prompt Delay The command manages the prompt delay between two different escape characters. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile ATS12=<time> Set command sets: the minimum period, before receipt of the first character of the three escape character sequence, during which no other character has to be detected in order to accept it as valid first character;...
Page 275 LE910Cx AT Commands Reference Guide ATS12? Read command returns the current value of S12 parameter. The format of the numbers in output is always 3 digits, left-filled with 0s. 80502ST10950A Rev. 14 Page 275 of 1904 2022-03-04 Not Subject to NDA...
Page 276: Ats25 - Delay To Dtr Off
LE910Cx AT Commands Reference Guide 3.2.3.11. ATS25 - Delay to DTR Off The command manages the amount of time that the device will ignore the DTR. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile ATS25=<time>...
Page 277 LE910Cx AT Commands Reference Guide The format of the numbers in output is always 3 digits, left-filled with 0s. 80502ST10950A Rev. 14 Page 277 of 1904 2022-03-04 Not Subject to NDA...
Page 278: Ats30 - Disconnect Inactivity Timer
LE910Cx AT Commands Reference Guide 3.2.3.12. ATS30 - Disconnect Inactivity Timer This command defines disconnect inactivity timer. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile ATS30=<tout> Set command defines the inactivity time-out in minutes. The device disconnects if no characters are exchanged for a time period of at least <tout>...
Page 279: Ats38 - Delay To Before Forced Hang Up
LE910Cx AT Commands Reference Guide 3.2.3.13. ATS38 - Delay To Before Forced Hang Up This command sets delay to before forced hang up. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile ATS38=<dalay> Set command sets the delay, in seconds, between the device's receipt of H command (or ON-to-OFF transition of DTR) and the disconnect operation.
Page 280 LE910Cx AT Commands Reference Guide 80502ST10950A Rev. 14 Page 280 of 1904 2022-03-04 Not Subject to NDA...
Page 281: At&V1 - S Registers Display
LE910Cx AT Commands Reference Guide 3.2.3.14. AT&V1 - S Registers Display The command displays the S registers values. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT&V1 Execution command returns the S registers values in both decimal and hexadecimal format.
Page 282 LE910Cx AT Commands Reference Guide Here is a generic example showing the format. AT&V1 REG DEC HEX 80502ST10950A Rev. 14 Page 282 of 1904 2022-03-04 Not Subject to NDA...
Page 283: At&V3 - Extended S Registers Display
LE910Cx AT Commands Reference Guide 3.2.3.15. AT&V3 - Extended S Registers Display The command displays the extended S registers values. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT&V3 Execution command returns the extended S registers values in both decimal and hexadecimal format.
Page 284: Dte - Modem Interface Control
LE910Cx AT Commands Reference Guide 3.2.4. DTE - Modem Interface Control 3.2.4.1. ATE - Command Echo This command allows to enable or disable the command echo. ITU-T Recommendation V.25 ter SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile ATE[<n>]...
Page 285: Atq - Quiet Result Codes
LE910Cx AT Commands Reference Guide 3.2.4.2. ATQ - Quiet Result Codes This command allows to enable or disable the result code. ITU-T Recommendation V.25 ter SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile ATQ[<n>] Set command enables or disables the result codes.
Page 286 LE910Cx AT Commands Reference Guide After issuing ATQ0 the OK result code is returned AT+CGACT=? +CGACT: (0-1) After issuing ATQ1 or ATQ2 the OK result code is not returned. AT+CGACT=? +CGACT: (0-1) 80502ST10950A Rev. 14 Page 286 of 1904 2022-03-04 Not Subject to NDA...
Page 287: Atv - Response Format
LE910Cx AT Commands Reference Guide 3.2.4.3. ATV - Response Format This command allows to set format of information responses and result codes. [1] ITU-T Recommendation V.25 ter SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile ATV[<n>] Set command determines the contents of the header and trailer transmitted with result codes and information responses.
Page 288 LE910Cx AT Commands Reference Guide <n>=1 <CR><LF> information responses <text><CR><LF> <CR><LF> result codes <verboseCode><CR><LF> the <text> portion of information responses is not affected by this setting. if parameter is omitted, the command has the same behavior of ATV0 80502ST10950A Rev. 14 Page 288 of 1904 2022-03-04 Not Subject to NDA...
Page 289: Ati - Identification Information
LE910Cx AT Commands Reference Guide 3.2.4.4. ATI - Identification Information This command returns identification information. ITU-T Recommendation V.25 ter SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required ATI[<n>] Execution command returns product information. Parameter: Name Type Default Description <n>...
Page 290: At&C - Data Carrier Detect (Dcd) Control
LE910Cx AT Commands Reference Guide 3.2.4.5. AT&C - Data Carrier Detect (DCD) Control This command controls the DCD output behavior. ITU-T Recommendation V25 ter SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT&C[<n>] Set command controls the DCD output behavior of the serial port. Parameter: Name Type...
Page 291: At&D - Data Terminal Ready (Dtr) Control
LE910Cx AT Commands Reference Guide 3.2.4.6. AT&D - Data Terminal Ready (DTR) Control This set command configures the behavior of the module according to the DTR control line transitions. ITU-T Recommendation V25 ter SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required...
Page 292 LE910Cx AT Commands Reference Guide if a connection has been set up issuing either #SKTD or #SKTOP, then AT&D1 has the same effect as AT&D2. If AT&D2 been issued and the DTR has been tied Low, auto answering is inhibited and it is possible to answer only issuing command ATA.
Page 293: At\Q - Standard Flow Control
LE910Cx AT Commands Reference Guide 3.2.4.7. AT\Q - Standard Flow Control This command controls the RS232 flow control behavior. ITU-T Recommendation V25 ter SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT\Q[<n>] Set command controls the RS232 flow control behavior. Parameter: Name Type...
Page 294: At&K - Flow Control
LE910Cx AT Commands Reference Guide 3.2.4.8. AT&K - Flow Control Flow Control settings. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT&K[<n>] Set command controls the RS232 flow control behavior. Parameter: Name Type Default Description <n>...
Page 295: At&S - Data Set Ready (Dsr) Control
LE910Cx AT Commands Reference Guide 3.2.4.9. AT&S - Data Set Ready (DSR) Control Set DSR behavior on RS232 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT&S[<n>] Set command controls the RS232 DSR pin behavior. Parameter: Name Type...
Page 296 LE910Cx AT Commands Reference Guide 80502ST10950A Rev. 14 Page 296 of 1904 2022-03-04 Not Subject to NDA...
Page 297: At+Ipr - Uart Dce Interface Data Rate Speed
LE910Cx AT Commands Reference Guide 3.2.4.10. AT+IPR - UART DCE Interface Data Rate Speed The command sets the speed of the DTE serial port. [1] Hardware User's Guide of the used module [2] ITU-T Recommendation V25 ter SIM Presence Setting saved Can be aborted MAX timeout SELINT...
Page 298 LE910Cx AT Commands Reference Guide 57600 : bps 115200 : bps 230400 : bps 460800 : bps 921600 : bps 2000000 : bps 2500000 : bps 3000000 : bps 3500000 : bps 3750000 : bps <rate> integer 115200 speed of the second UART serial port expressed in bit per second Values: : bps...
Page 299 LE910Cx AT Commands Reference Guide 460800 : bps 921600 : bps If <rate> specified DTE-DCE speed fixed to that speed, hence no speed auto- detection (autobauding) enabled. AT+IPR? Read command returns the current value of <rate> parameter. AT+IPR? +IPR: 115200,115200 AT+IPR=? Test command returns the list of supported auto detectable <rate>...
Page 300 LE910Cx AT Commands Reference Guide This command has no effect on USB interface; the DCE sends the OK result but the settings has no effect on serial interface 80502ST10950A Rev. 14 Page 300 of 1904 2022-03-04 Not Subject to NDA...
Page 301: At#Dtr - Data Terminal Ready (Dtr) Flow Control
LE910Cx AT Commands Reference Guide 3.2.4.11. AT#DTR - Data Terminal Ready (DTR) flow control The command configures how the outbound flow on serial ports is controlled by the DTR signal. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#DTR=<n>...
Page 302 LE910Cx AT Commands Reference Guide For USB ports, receiving input data has the same effect of a low to high level transition. Therefore, if the DTR is not asserted, or if it is asserted but its level has not been signaled by the DTE to the DCE, after receiving input data the DTR is considered asserted.
Page 303: At+Flo - Select Flow Control Specified By Type
LE910Cx AT Commands Reference Guide 3.2.4.12. AT+FLO - Select Flow Control Specified By Type Set command selects the flow control behaviour of the serial port in both directions: from DTE to DTA and from DTA to DTE. ITU T.31 and TIA/EIA-578-A specifications SIM Presence Setting saved Can be aborted...
Page 304 LE910Cx AT Commands Reference Guide AT+FLO=? Test command returns all supported values of the parameter <type>. Test command result is without command echo. 80502ST10950A Rev. 14 Page 304 of 1904 2022-03-04 Not Subject to NDA...
Page 305: At+Ifc - Dte-Modem Local Flow Control
LE910Cx AT Commands Reference Guide 3.2.4.13. AT+IFC - DTE-Modem Local Flow Control This set command selects the flow control of the serial port in both directions. ITU-T Recommendation V25 ter SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT+IFC=<byDTE>,<byDCE>...
Page 306 LE910Cx AT Commands Reference Guide 2 : flow control by CTS control line (C105, Clear to Send) The only possible commands are AT+IFC=0,0 and AT+IFC=2,2. Hardware flow control (AT+IFC=2,2) is not active in command mode. To active this setting in command mode, use AT#CFLO=1. This command is equivalent to &K command.
Page 307: At+Icf - Dte-Modem Character Framing
LE910Cx AT Commands Reference Guide 3.2.4.14. AT+ICF - DTE-Modem Character Framing This set command defines the asynchronous character framing. ITU-T Recommendation V.25 ter SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT+ICF=<format>[,<parity>] Set command defines the asynchronous character framing to be used when autobauding is disabled.
Page 308 LE910Cx AT Commands Reference Guide AT+ICF=? Test command returns the ranges of values for the parameters <format> and <parity>. This command has no effect on USB interface. It's used only for UART interface. AT+ICF=3 AT+ICF=? +ICF: (3),(0,1) 80502ST10950A Rev. 14 Page 308 of 1904 2022-03-04 Not Subject to NDA...
Page 309: At#Cflo - Command Flow Control
LE910Cx AT Commands Reference Guide 3.2.4.15. AT#CFLO - Command Flow Control This set command enables/disables the hardware flow control in command mode. If enabled, the flow control is applied to both data mode and command mode. SIM Presence Setting saved Can be aborted MAX timeout SELINT...
Page 310 LE910Cx AT Commands Reference Guide #CFLO: <enable> AT#CFLO=? Test command returns the range of supported values for parameter <enable>. 80502ST10950A Rev. 14 Page 310 of 1904 2022-03-04 Not Subject to NDA...
Page 311: At#Skipesc - Skip Escape Sequence
LE910Cx AT Commands Reference Guide 3.2.4.16. AT#SKIPESC - Skip Escape Sequence This command enables/disables skipping the escape sequence. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Specific profile AT#SKIPESC=[<mode>] Set command enables/disables skipping the escape sequence (+++) while transmitting during a data connection.
Page 312 LE910Cx AT Commands Reference Guide AT#SKIPESC=? Test command returns the supported values of parameter <mode>. 80502ST10950A Rev. 14 Page 312 of 1904 2022-03-04 Not Subject to NDA...
Page 313: At#E2Esc - Escape Sequence Guard Time
LE910Cx AT Commands Reference Guide 3.2.4.17. AT#E2ESC - Escape Sequence Guard Time This command sets a guard time in seconds for the escape sequence in GPRS to be considered a valid one, and return to on-line command mode. SIM Presence Setting saved Can be aborted MAX timeout...
Page 314 LE910Cx AT Commands Reference Guide AT#E2ESC=? Test command returns the OK result code. 80502ST10950A Rev. 14 Page 314 of 1904 2022-03-04 Not Subject to NDA...
Page 315: Atx - Extended Result Codes
LE910Cx AT Commands Reference Guide 3.2.4.18. ATX - Extended Result Codes This command allows to select the subset of result code messages. ITU-T Recommendation V.25 ter SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Specific profile ATX[<n>] Set command selects the subset of result code messages the modem uses to reply to the DTE upon AT commands execution.
Page 316 LE910Cx AT Commands Reference Guide When the <n> parameter is omitted, the command acts like ATX0. Current value is returned by AT&V. Parameter: <n> - EXTENDED MESSAGES : X0=NO 1..4 - EXTENDED MESSAGES : X1=YES For complete control on CONNECT response message see also +DR command.
Page 317: At#Kipr - Keep Dte Interface Rate
LE910Cx AT Commands Reference Guide 3.2.4.19. AT#KIPR - Keep DTE Interface Rate This command enables/disables to keep the current DTE speed permanently. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#KIPR=<enable> Set command enables/disables to keep the current DTE speed permanently.
Page 318 LE910Cx AT Commands Reference Guide #KIPR: 1 AT#KIPR=? Test command returns the list of supported <enable> values in the format: AT#KIPR=? #KIPR: (0,1) AT+IPR=115200,9600 AT+IPR? +IPR: 115200,9600 AT&W&P AT#KIPR=1 AT&F AT+IPR? +IPR: 115200,9600 80502ST10950A Rev. 14 Page 318 of 1904 2022-03-04 Not Subject to NDA...
Page 319: At#Nopt - Notification Port
LE910Cx AT Commands Reference Guide 3.2.4.20. AT#NOPT - Notification Port Set notification(URC) message port SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT#NOPT=<num> Set command specifies the port output notification (URC) messages Parameter: Name Type Default Description...
Page 320 LE910Cx AT Commands Reference Guide If the configured port closed, URC messages will be discarded. DTE must enable DTR line to get URC messages on Telit USB ports and Multiplexer ports. AT#NOPT? Read command reports the current notification port. AT#NOPT=? Test command reports the available range of values for parameter <num>.
Page 321: At#Noptext - Notification Port Extension
LE910Cx AT Commands Reference Guide 3.2.4.21. AT#NOPTEXT - Notification Port Extension Set notification port extension SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT#NOPTEXT=<noptext_enable>[,<port1_enable>[,<port2_enable>[,<port3_enable> [,<port4_enable>[,<port5_enable>[,<port6_enable>[,<port7_enable>[,<port8_enable >]]]]]]]] Set command specified the port output notification (URC) messages This command is extended from AT#NOPT command.
Page 322 LE910Cx AT Commands Reference Guide 0 : disable URC message on port2 1 : enable URC message on port2 <port3_enable> integer enable port3 - Telit USB Modem 2 Port Values: 0 : disable URC message on port3 1 : enable URC message on port3 <port4_enable>...
Page 323 LE910Cx AT Commands Reference Guide 1 : enable URC message on port7 <port8_enable> integer enable port5 - Multiplexer DLCI4 Port Values: 0 : disable URC message on port8 1 : enable URC message on port8 if <noptext_enable> is enable, #NOPT's setting value ignored and URC message port specified by #NOPTEXT setting value.
Page 324 LE910Cx AT Commands Reference Guide DTE must enable DTR line to get URC messages on Telit USB ports, otherwise URC message will be discarded This command enable URC message on "UART_1" and "USB_MDM1" • AT#NOPTEXT=1,1,0,0,0,0,0,0,0 80502ST10950A Rev. 14 Page 324 of 1904 2022-03-04 Not Subject to NDA...
Page 325: At+Ilrr - Dte-Modem Local Rate Reporting
LE910Cx AT Commands Reference Guide 3.2.4.22. AT+ILRR - DTE-Modem Local Rate Reporting This command controls whether or not the +ILRR: <rate> information text transmitted from the modem (module) to the DTE. ITU-T Recommendation V.25 ter SIM Presence Setting saved Can be aborted MAX timeout SELINT Required...
Page 326 LE910Cx AT Commands Reference Guide Test command returns all supported values of the parameter <n>. 80502ST10950A Rev. 14 Page 326 of 1904 2022-03-04 Not Subject to NDA...
Page 327: At\K - Break Handling
LE910Cx AT Commands Reference Guide 3.2.4.23. AT\K - Break Handling This command is used to Break Handling . SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT\K Execution command has no effect and is included only for backward compatibility with landline modems.
Page 328: At\R - Ring (Ri) Control
LE910Cx AT Commands Reference Guide 3.2.4.24. AT\R - Ring (RI) Control This command allows the user to control the RING output pin behaviour. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT\R[<n>] Set command controls the RING output pin behaviour. Parameter: Name Type...
Page 329: At\B - Transmit Break To Remote
LE910Cx AT Commands Reference Guide 3.2.4.25. AT\B - Transmit Break To Remote This command controls transmit break to remote. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT\B Execution command has no effect and is included only for backward compatibility with landline modems 80502ST10950A Rev.
Page 330: At\N - Operating Mode
LE910Cx AT Commands Reference Guide 3.2.4.26. AT\N - Operating Mode This command controls operating mode. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT\N Execution command has no effect and is included only for backward compatibility with landline modems 80502ST10950A Rev.
Page 331: Call (Voice And Data) Control
LE910Cx AT Commands Reference Guide 3.2.5. Call (Voice and Data) Control 3.2.5.1. ATD - Dialup Connection This command establishes a Mobile Originated call to the destination phone number. ITU-T Recommendation V.25 ter 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required...
Page 332 LE910Cx AT Commands Reference Guide the dial string according to ATS8 duration. ATD><str>[;] If ";" character is present, a voice call is performed using the phone number identified by an alphanumeric field. All available memories are scanned to find out the field. Name Type Default...
Page 333 LE910Cx AT Commands Reference Guide : MT dialled calls list ME : MT phonebook : SIM/USIM (or MT) emergency number (+CPBW is not be applicable for this storage) ON : SIM (or MT) own numbers (MSI storage may be available through +CNUM also). MB : Mailbox numbers stored on SIM, if this service is provided by the SIM (see #MBN) <n>...
Page 334 LE910Cx AT Commands Reference Guide Name Type Default Description <nr> integer identifies the internal phonebook position of the module where is stored the phone number to be dialed ATD<number><modifier>[;] If ";" character is present, a voice call is performed overriding the CLIR supplementary service subscription default value, or checking the CUG supplementary service information for the current call according to the modifier.
Page 335 LE910Cx AT Commands Reference Guide Name Type Default Description <gprs_sc> integer is the GPRS Service Code, which identifies a request to use the GPRS communication Value: 99 : GPRS Service Code <addr> string identifies the called party in the address space applicable to the PDP.
Page 336 LE910Cx AT Commands Reference Guide • Dial the phone number stored in the SIM phonebook at entry 6. The call is a data or voice call according to the mode set by +FCLASS command. ATD>SM6 • Dial the phone number stored in the active phonebook at entry 6. The ";"...
Page 337: Atp - Pulse Dial
LE910Cx AT Commands Reference Guide 3.2.5.2. ATP - Pulse Dial This command has no effect is included only for backward compatibility. ITU-T Recommendation V.25 ter SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Set command has no effect is included only for backward compatibility with landline modems.
Page 338: Ato - Return To On-Line Mode
LE910Cx AT Commands Reference Guide 3.2.5.3. ATO - Return to ON-Line Mode This execution command is used, during a suspended data conversation, to return in on- line mode from command mode. If there is no suspended conversation, it returns NO CARRIER.
Page 339: Att - Tone Dial
LE910Cx AT Commands Reference Guide 3.2.5.4. ATT - Tone Dial This command has no effect is included only for backward compatibility. ITU-T Recommendation V.25 ter SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Set command has no effect is included only for backward compatibility with landline modems.
Page 340: At&G - Guard Tone
LE910Cx AT Commands Reference Guide 3.2.5.5. AT&G - Guard Tone This command tells the modem which guard tone, if any, to transmit while transmitting in the answer mode. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT&G Set command has no effect is included only for backward compatibility with landline modems.
Page 341: At&Q - Sync/Async Mode
LE910Cx AT Commands Reference Guide 3.2.5.6. AT&Q - Sync/Async Mode This command selects the communication mode. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT&Q Set command has no effect is included only for backward compatibility with landline modems.
Page 342: At+Chsn - Hscsd Non-Transparent Call Configuration
LE910Cx AT Commands Reference Guide 3.2.5.7. AT+CHSN - HSCSD non-transparent call configuration Set command controls parameters for originating non-transparent HSCSD calls. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CHSN=[<wAiur>[,<wRx>[,<topRx>[,<codings>]]]] Set command controls parameters for originating non-transparent HSCSD calls.
Page 343 LE910Cx AT Commands Reference Guide <topRx> integer top value for <wRx> that user is going to request during the next established nontransparent HSCSD call Value: 0 : 0 indicates that user is not going to change <wAiur>/<wRx> during the next call. This parameter is not applicable to UTRAN or E-UTRAN UEs.
Page 344: Ata - Answer Incoming Call
LE910Cx AT Commands Reference Guide 3.2.5.8. ATA - Answer Incoming call The command is used to answer to an incoming call if automatic answer is disabled. ITU-T Recommendation V.25 ter 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required...
Page 345: Ath - Hang Up/Disconnect The Current Call
LE910Cx AT Commands Reference Guide 3.2.5.9. ATH - Hang Up/Disconnect the Current Call This execution command hangs up/disconnects the current voice/data call or dial-up. ITU-T Recommendation V.25 ter SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required When a data call or a dial-up is active the device is in on-line mode hence, to execute ATH command the device must be previously turned in command mode using the escape sequence...
Page 346: At#Dialmode - Set Dialing Mode
LE910Cx AT Commands Reference Guide 3.2.5.10. AT#DIALMODE - Set Dialing Mode This command sets dialing modality. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#DIALMODE=[<mode>] Set command sets dialing modality. Parameter: Name Type Default Description <mode>...
Page 347 LE910Cx AT Commands Reference Guide <mode>=2 Voice call and data call, the following custom result codes are received, monitoring step by step the call status: DIALING (MO in progress) RINGING (remote ring) CONNECTED (remote call accepted) RELEASED (after ATH) DISCONNECTED (remote hang-up). Any character typed before the CONNECTED message aborts the call.
Page 348: At#Calldisa - Call Disable Setting
LE910Cx AT Commands Reference Guide 3.2.5.11. AT#CALLDISA - Call Disable Setting This command used to control the Disable Call Type and SMS only registration. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#CALLDISA=<disable_type>[,<sms_only>] Set command sets the Disable Call Type and SMS only registration Parameters: Name Type...
Page 349 LE910Cx AT Commands Reference Guide If 2nd parameter is set to 1 when attempting the Attach request, then the Network doesn't send the paging for Voice Call and send the paging for only SMS. It may vary depending on the operator or environment. Occasionally, some network send the paging both even if sms_only is set to 1.
Page 350: Modulation & Compression Control
LE910Cx AT Commands Reference Guide 3.2.6. Modulation & Compression Control 3.2.6.1. AT%E - Line Quality and Auto Retrain This command is used for line quality monitoring and auto retrain or fall back/fall forward. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required...
Page 351: At+Ds - Data Compression
LE910Cx AT Commands Reference Guide 3.2.6.2. AT+DS - Data Compression The command sets the V42 compression parameter. ITU-T V.25ter SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT+DS=[<dir>[,<neg>[,<P1>[,<P2>]]]] Set command sets the V42 compression parameter. Parameters: Name Type Default...
Page 352 LE910Cx AT Commands Reference Guide 512÷2048 : supported value <P2> integer the maximum string length Value: 6 : the only supported value AT+DS? Read command returns current value of the data compression parameter. AT+DS=? Test command returns all supported values of the parameter. 80502ST10950A Rev.
Page 353: At+Dr - Data Compression Reporting
LE910Cx AT Commands Reference Guide 3.2.6.3. AT+DR - Data Compression Reporting This command enables the data compression reporting. ITU-T V.25ter SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT+DR=<n> Set command enables/disables the data compression reporting upon connection.
Page 354 LE910Cx AT Commands Reference Guide Read command returns the current value of the parameter <n> in the format: +DR: <n> AT+DR=? Test command returns the supported values of parameter <n>. 80502ST10950A Rev. 14 Page 354 of 1904 2022-03-04 Not Subject to NDA...
Page 355: Jamming Detection And Report
LE910Cx AT Commands Reference Guide Jamming Detection and Report 3.3.1. AT#JDRENH2 - Enhanced Jamming Detection and Report This command enables/disable jamming detection and reports the relative result to the user. [1] Hardware User's Guide of the used module SIM Presence Setting saved Can be aborted MAX timeout...
Page 356 LE910Cx AT Commands Reference Guide 1 : enable jamming detection, and report its condition on a GPIO pin, see Additional info section 2 : enable jamming detection, and report its condition with an URC, see Additional info section 3 : enable jamming detection, and report its condition as <mode>=1 and <mode>=2 4 : enable jamming detection, and report its condition with an URC every 3 sec, see...
Page 357 LE910Cx AT Commands Reference Guide 0÷200 : number of carriers <pRxLevT2G> integer set the threshold of RxLev in 2G Network. The RxLev_Thr threshold is calculated as shown below: RxLev_Thr = RxLev_Av * (1 + (<pRxLevT2G>/100)) where RxLev_Av is the average of the last 10 RxLev measures.
Page 358 LE910Cx AT Commands Reference Guide T_RSSI_MIN = RSSI_Avg*(1- (<P_RSSI_T4G>/100)) where RSSI_Avg is the average of the last 50 RSSI measures. Value: 0÷100 : RSSI threshold values <P_RSRQ_T4G> integer Set the threshold of RSRQ. The threshold (RSRQ_Thr) is calculated RSRQ_Thr = RSRQ_Avg*(1- (<P_RSRQ_T4G>/100)) where RSRQ_Avg is the average of the last 50 RSRQ measures.
Page 359 LE910Cx AT Commands Reference Guide The jamming condition is reported on pin GPIO_02 (JDR): - GPIO_02 (JDR) = Low, Normal Operating Condition - GPIO_02 (JDR) = High, Jammed Condition To have information on GPIO_02 pin, refer to document [1]. GPIO_02 pin can be used also by other functionality, see #GPIO command.
Page 360 LE910Cx AT Commands Reference Guide AT#JDRENH2? Read command reports the current parameters values, in the format: #JDRENH2:<mode>,<sat2G>,0,<carrNum2G>,<pRxLevT2G>,0,0,0,<P_RSSI_T4G>, <P_RSRQ_T4G>,0,0 AT#JDRENH2=? Test command reports the supported range of values for the parameters. 80502ST10950A Rev. 14 Page 360 of 1904 2022-03-04 Not Subject to NDA...
Page 361: At#Jdrgnss - Gnss Jamming Detect & Report
LE910Cx AT Commands Reference Guide 3.3.2. AT#JDRGNSS - GNSS Jamming Detect & Report This command configures to support GNSS Jamming Detect & Report. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#JDRGNSS=<mode> Set command allows to control the GNSS Jamming Detect & Report feature.
Page 362 LE910Cx AT Commands Reference Guide JAMMED : Jammed condition detected OPERATIVE : Normal Operating condition restored When the Jammed condition is changed, the Jammed <status> is reported. AT#JDRGNSS? Read command reports the current behavior mode and Jammed state, in the format: #JDRGNSS: <mode>,<state>...
Page 363 LE910Cx AT Commands Reference Guide Test command reports the supported range of values for the parameters. #JDRGNSS: (0,1) 80502ST10950A Rev. 14 Page 363 of 1904 2022-03-04 Not Subject to NDA...
Page 364: At#Jdr4Gcfg - Lte Jamming Detection Threshold Configuration
LE910Cx AT Commands Reference Guide 3.3.3. AT#JDR4GCFG - LTE Jamming Detection Threshold Configuration The command configures the LTE Jamming Detection thresholds. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#JDR4GCFG=<P_RSRP_T4G>,<P_RSRQ_T4G>,<P_RSSNR_T4G> Set command allows to configure the LTE Jamming Detection thresholds. After configuration, use the #JDRENH2 command to enable/disable LTE jamming detection and select reporting mode.
Page 365 LE910Cx AT Commands Reference Guide <P_RSSNR_T4G> integer set the threshold of RSSNR. The threshold (RSSNR_Thr) is calculated RSSNR_Thr= RSSNR_Av*(1+(<P_RSSNR_T4G>/100)) where RSSNR_Av is the average of the last 10 RSSNR measures Value: 0÷100 : threshold of RSSNR If you change the <P_RSRP_T4G>, <P_RSRQ_T4G>, and <P_RSSNR_T4G>...
Page 366: Network
LE910Cx AT Commands Reference Guide Network 3.4.1. AT+CNUM - Subscriber Number This command returns the MSISDN (if the phone number of the device has been stored in the SIM card). 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required...
Page 367 LE910Cx AT Commands Reference Guide <number> string numeric string containing the phone number in the format <type> <type> integer type of number Values: 129 : national numbering scheme 145 : international numbering scheme (contains the character "+") AT+CNUM=? Test command returns the OK result code. 80502ST10950A Rev.
Page 368: At+Copn - Read Operator Names
LE910Cx AT Commands Reference Guide 3.4.2. AT+COPN - Read Operator Names This command read operator names. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT+COPN Execution command returns the list of operator names from the ME in the format: +COPN: <numeric1>,<alpha1>[<CR><LF>...
Page 369 LE910Cx AT Commands Reference Guide Each operator code <numericn> that has an alphanumeric equivalent <alphan> in the ME memory is returned. Because <alphan> display to depend on character set (+CSCS), <alphan> may not be displayed properly. AT+COPN=? Test command returns the OK result code. 80502ST10950A Rev.
Page 370: At+Creg - Network Registration Status
LE910Cx AT Commands Reference Guide 3.4.3. AT+CREG - Network Registration Status The command enables/disables the network registration unsolicited result code (URC) and selects its presentation format. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT+CREG=[<mode>] Set command enables/disables the network registration unsolicited result...
Page 371 LE910Cx AT Commands Reference Guide 0 : disable the network registration unsolicited result code 1 : enable the network registration unsolicited result code, and selects the short format 2 : enable the network registration unsolicited result code, and selects the long format (includes the network cell identification data) Unsolicited fields: Name...
Page 372 LE910Cx AT Commands Reference Guide E-UTRAN <lac>, <ci> and <AcT> network information is reported by URC only if <mode>=2, and the module is registered on some network cell. AT+CREG? Read command returns the current value of <mode>, the registration status <stat>, and the network information (<lac>, <ci> and <AcT>) according to the used <mode>...
Page 373 LE910Cx AT Commands Reference Guide Check the registration status of the module. AT+CREG? +CREG: 0,2 The module is in network searching state Check again module status AT+CREG? +CREG: 0,1 The module is registered 80502ST10950A Rev. 14 Page 373 of 1904 2022-03-04 Not Subject to NDA...
Page 374: At+Clck - Facility Lock/Unlock
LE910Cx AT Commands Reference Guide 3.4.4. AT+CLCK - Facility Lock/Unlock This command is used to lock, unlock, or interrogate a MT or a network facility. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT+CLCK=<fac>,<mode>[,<passwd>[,<class>]] Set command is used to lock, unlock, or interrogate a MT or a network facility.
Page 375 LE910Cx AT Commands Reference Guide "OX" : BOIC-exHC (Barr Outgoing International Calls except to Home Country) "SC" : SIM (lock SIM/UICC card installed in the currently selected card slot) (SIM/UICC asks password in MT power-up and when this lock command issued) "FD"...
Page 376 LE910Cx AT Commands Reference Guide 1: voice(telephony) 2: data 4: fax (facsimile services) 8: short message service 16: data circuit sync 32: data circuit async 64: dedicated packet access 128: dedicated PAD access Value: 1÷255 : 1..255 Additional info: When <mode>=2 and command is successful: +CLCK: <status>[,<class1>[<CR><LF>...
Page 377 LE910Cx AT Commands Reference Guide Querying such a facility returns an output on three rows, the first for voice, the second for data, the third for fax: AT+CLCK ="AO",2 +CLCK: <status>,1 +CLCK: <status>,2 +CLCK: <status>,4 80502ST10950A Rev. 14 Page 377 of 1904 2022-03-04 Not Subject to NDA...
Page 378: At+Cpwd - Change Facility Password
LE910Cx AT Commands Reference Guide 3.4.5. AT+CPWD - Change Facility Password This command is used to change the password for the facility lock function defined by command Facility Lock +CLCK. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required...
Page 379 LE910Cx AT Commands Reference Guide "SC" : SIM (PIN request) "P2" : SIM PIN2 "PN" : Network Personalization "PU" : network sUbset Personalization "PP" : service Provider Personalization "PC" : Corporate Personalization "PF" : lock Phone to the very First inserted SIM/UICC card (also referred in the present document as PHFSIM) (MT asks password when other than the first SIM/UICC card is inserted)
Page 380 LE910Cx AT Commands Reference Guide 80502ST10950A Rev. 14 Page 380 of 1904 2022-03-04 Not Subject to NDA...
Page 381: At+Clir - Calling Line Identification Restriction
LE910Cx AT Commands Reference Guide 3.4.6. AT+CLIR - Calling Line Identification Restriction The command manages the CLIR service. 3GPP TS 27.007 3GPP TS 22.081 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Specific profile AT+CLIR=[<n>] Set command overrides the CLIR subscription when temporary mode is provisioned as a default adjustment for all following outgoing calls.
Page 382 LE910Cx AT Commands Reference Guide AT+CLIR? Read command gives the default adjustment for all outgoing calls (<n>) and also triggers an interrogation of the provision status of the CLIR service (<m>), in the form +CLIR: <n>,<m> Additional info: Name Type Default Description <n>...
Page 383 LE910Cx AT Commands Reference Guide Test command reports the supported values of parameter <n> 80502ST10950A Rev. 14 Page 383 of 1904 2022-03-04 Not Subject to NDA...
Page 384: At+Colp - Connected Line Identification Presentation
LE910Cx AT Commands Reference Guide 3.4.7. AT+COLP - Connected Line Identification Presentation This command enables/disables the presentation of the COL at the TE. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Specific profile AT+COLP=[<n>] Set command enables/disables the presentation of the COL at the TE.
Page 385 LE910Cx AT Commands Reference Guide It has no effect on the execution of the supplementary service COLR in the network. Unsolicited fields: Name Type Description <number> string string type phone number of format specified by <type> <type> integer type of address octet in integer format Values: 129 : unknown type of number and ISDN/Telephony numbering plan...
Page 386 LE910Cx AT Commands Reference Guide Read command gives the status of <n>, and also triggers an interrogation of the provision status of the COLP service according 3GPP TS 22.081 (given in <m>) in the format: +COLP: <n>,<m> Additional info: where Name Type Default...
Page 387: At+Chld - Call Holding Services
LE910Cx AT Commands Reference Guide 3.4.8. AT+CHLD - Call Holding Services The command controls the network call hold service. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CHLD=[<n>] Set command controls the network call hold service. With this service it is e.g.
Page 388 LE910Cx AT Commands Reference Guide : adds an held call to the conversation : connects the two calls and disconnects the subscriber from both calls (Explicit Call Transfer (ECT)) "X" is the numbering (starting with 1) of the call given by the sequence of setting up or receiving the calls (active, held or waiting) as seen by the served subscriber.
Page 389: At+Ctfr - Call Deflection
LE910Cx AT Commands Reference Guide 3.4.9. AT+CTFR - Call Deflection This command is used to request a service that causes an incoming alerting call to be forwarded to a specified number. 3GPP TS 22.072 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required...
Page 390 LE910Cx AT Commands Reference Guide <subaddr> string string type subaddress of format specified by <satype> <satype> string type of subaddress octet in integer format (refer 3GPP TS 24.008 subclause 10.5.4.8); default 128 The interaction of this command with other commands based on other GSM/UMTS supplementary services is described on GSM/UMTS standard.
Page 391: At+Cusd - Unstructured Supplementary Service Data
LE910Cx AT Commands Reference Guide 3.4.10. AT+CUSD - Unstructured Supplementary Service Data Set command allows control of the Unstructured Supplementary Service Data (USSD 3GPP TS 22.090). 3GPP TS 27.007 3GPP TS 22.090 3GPP TS 23.038 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required...
Page 392 LE910Cx AT Commands Reference Guide <str> string USSD-string (when <str> parameter is not given, network is not interrogated) If <dcs> indicates that 3GPP TS 23.038 default alphabet is used ME/TA converts GSM alphabet into current TE character set (see +CSCS). If <dcs>...
Page 393 LE910Cx AT Commands Reference Guide AT+CUSD? Read command reports the current value of the parameter <n> AT+CUSD=? Test command reports the supported values for the parameter <n> 80502ST10950A Rev. 14 Page 393 of 1904 2022-03-04 Not Subject to NDA...
Page 394: At+Caoc - Advice Of Charge
LE910Cx AT Commands Reference Guide 3.4.11. AT+CAOC - Advice of Charge This command allows the user to get information about the cost of calls and to enable an unsolicited event reporting of the Current Call Meter (CCM) information. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted...
Page 395 LE910Cx AT Commands Reference Guide where: <ccm> - current call meter in home units, string type: three bytes of the CCM value in hexadecimal format (e.g. "00001E" indicates decimal value 30) Unsolicited field: Name Type Description <ccm> The unsolicited result code enabled by parameter <mode>...
Page 396 LE910Cx AT Commands Reference Guide +CAOC command returns an estimate of the cost of the current call only, produced by the MS and based on the information provided by either AoCI or AOCC supplementary services; it is not stored in the SIM.
Page 397: At+Clcc - List Current Calls
LE910Cx AT Commands Reference Guide 3.4.12. AT+CLCC - List Current Calls This command returns the list of current calls and their characteristics 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CLCC Execution command returns the list of current calls and their characteristics in the format: [+CLCC:<id >,<dir>,<stat>,<mode>,<mpty>,<number>,<type>,<alpha>[<CR><LF>...
Page 398 LE910Cx AT Commands Reference Guide Values: 0 : active 1 : held 2 : dialing (MO call) 3 : alerting (MO call) 4 : incoming (MT call) 5 : waiting (MT call) <mode> integer call type Values: 0 : voice 1 : data 2 : fax (not supported by LTE) 9 : unknown...
Page 399 LE910Cx AT Commands Reference Guide 145 : international numbering scheme (contains the character "+") <alpha> string alphanumeric representation of <number> corresponding to the entry found in phonebook; used character set should be the one selected with +CSCS If no call is active then only OK message is sent. This command is useful in conjunction with command +CHLD to know the various call status for call holding For VOLTE,...
Page 400: At+Cssn - Ss Notification
LE910Cx AT Commands Reference Guide 3.4.13. AT+CSSN - SS Notification The command refers to supplementary service related network initiated notifications. • 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Specific profile AT+CSSN=[<n>[,<m>]] Set command enables/disables the presentation of notification result codes from TA to TE.
Page 401 LE910Cx AT Commands Reference Guide unsolicited result code is sent to TE +CSSU: <code2> Values: 0 : disable 1 : enable Unsolicited fields: Name Type Description <code1> integer +CSSI supplementary service notification. Values: 0 : unconditional call forwarding is active 1 : some of the conditional call forwardings are active 2 : call has been forwarded...
Page 402 LE910Cx AT Commands Reference Guide AT+CSSN? Read command reports the current value of the parameters. AT+CSSN=? Test command reports the supported range of values for parameters <n>, <m>. 80502ST10950A Rev. 14 Page 402 of 1904 2022-03-04 Not Subject to NDA...
Page 403: At+Ccug - Closed User Group
LE910Cx AT Commands Reference Guide 3.4.14. AT+CCUG - Closed User Group This command allows control of the Closed User Group supplementary service. 3GPP TS 27.007 3GPP TS 22.085 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CCUG=[<n>[,<index>[,<info>]]] Set command enables the served subscriber to select a CUG index, to suppress the Outgoing Access (OA), and to suppress the preferential CUG.
Page 404 LE910Cx AT Commands Reference Guide <info> integer information added to the Values: 0 : no information 1 : suppress Outgoing Access (OA) 2 : suppress preferential CUG 3 : suppress OA and preferential CUG AT+CCUG? Read command reports the current value of the parameters in the format +CCUG: <n>,<index>,<info>...
Page 405: At+Cpol - Preferred Operator List
LE910Cx AT Commands Reference Guide 3.4.15. AT+CPOL - Preferred Operator List The command is used to edit or update the UICC preferred list of networks. The list is read in the UICC file selected by the command +CPLS. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted...
Page 406 LE910Cx AT Commands Reference Guide <GSM_AcT> integer GSM access technology. Values: 0 : access technology not selected 1 : access technology selected <GSM_Compact_AcT> integer GSM compact access technology. Currently the parameter is not supported but set value is accepted. Values: 0 : access technology not selected 1 : access technology selected <UTRAN_AcT>...
Page 407 LE910Cx AT Commands Reference Guide if <index> given but <oper> left out, the entry deleted. If <oper> given but <index> left out, <oper> put in the next free location. If only <format> given, the format of the <oper> in the read command changes.
Page 408 LE910Cx AT Commands Reference Guide Entry 3 in the preferred list of the operators is deleted. AT+CPOL=3 Operator identifier 22603 is inserted in the next free location of the list. AT+CPOL=,2,22603 Format of <oper> in the read command is changed (only 2 is allowed up to now).
Page 409: At#Codecinfo - Codec Information
LE910Cx AT Commands Reference Guide 3.4.16. AT#CODECINFO - Codec Information This command returns information about the channels codecs. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT#CODECINFO[=<format>[,<mode>]] This command is both a set and an execution command. Set command enables/disables codec information reports depending on the parameter <mode>, in the specified <format>.
Page 410 LE910Cx AT Commands Reference Guide 1 : enable codec information unsolicited report only if the codec changes, see info section 2 : enable short codec information unsolicited report only if the codec changes, see info section Additional info: <mode>=1, the unsolicited channel mode information is reported according to the <format>...
Page 411 LE910Cx AT Commands Reference Guide #CODECINFO: <codec_used>,<codec_set1>[,<codec_set2>[..[,codec_setn]]] The parameters and their format is described in the Unsolicited code values section. Unsolicited fields: Name Type Description <codec_used> string <format>=0, <codec_used> is displayed in numeric format Values: no TCH full rate speech 1 on TCH full rate speech 2 on TCH half rate speech 1 on TCH full rate speech 3 –...
Page 412 LE910Cx AT Commands Reference Guide <codec_set> string <format>=0, <codec_set> is displayed in numeric format. It is the sum of integers each representing a specific channel codec. channel codec: - FR, full rate mode enabled - EFR, enhanced full rate mode enabled - HR, half rate mode enabled - FAMR, AMR full rate mode enabled 16 - HAMR, AMR half rate mode enabled...
Page 413 LE910Cx AT Commands Reference Guide UAMRNB : UMTS-AMR Narrow band mode enabled UAMRWB : UMTS-AMR Wide band mode enabled FD96 : full data 9.6 FD48 : full data 4.8 FD24 : full data 2.4 HD48 : half data 4.8 HD24 : half data 2.4 FD144 : full data 14.4...
Page 414 LE910Cx AT Commands Reference Guide The command refers to codec information in speech call, and to channel mode in data/fax call. If AT#CODEC=0, the reported channels codecs set, for <format>=0, is 255 (all codecs). AT#CODECINFO? Read command reports <format> and <mode> parameter values in the format: #CODECINFO: <format>,<mode>...
Page 415: At+Cpls - Selection Of Preferred Plmn List
LE910Cx AT Commands Reference Guide 3.4.17. AT+CPLS - Selection of Preferred PLMN List The command is used to select a list of preferred PLMNs in the SIM/USIM card. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto...
Page 416 LE910Cx AT Commands Reference Guide If trying to set + CPLS which is not in supported range, an error would be returned. AT+CPLS? Read command returns the selected PLMN selector <list> from the SIM/USIM. AT+CPLS=? Test command returns the whole index range supported <list>s by the SIM/USIM.
Page 417: At+Csq - Signal Quality
LE910Cx AT Commands Reference Guide 3.4.18. AT+CSQ - Signal Quality Execution command returns received signal strength indication <rssi> and channel bit error rate <ber> from the MT. [1] 3GPP TS 27.007 [2] 3GPP TS 07.07 [3] 3GPP TS 25.133 SIM Presence Setting saved Can be aborted MAX timeout...
Page 418 LE910Cx AT Commands Reference Guide 2÷30 : -109 dBm ... -53 dBm; 2 dBm per step : -51 dBm or greater : not known or not detectable <sq> integer <sq>: signal quality measurements of the channel BER(bit error rate), expressed in %, are mapped to <sq>...
Page 419 LE910Cx AT Commands Reference Guide TS27.007 specification, levels are mapped to range 0...31. Values: : -113 dBm or less : -111 dBm 2÷30 : -109...-53 dBm : - 51 dBm or greater : not known or not detectable <sq> integer <sq>: signal quality RSRQ: Reference Signal Received Quality.
Page 420 LE910Cx AT Commands Reference Guide 3G Networks The execution command returns the following message: +CSQ: <rssi>,<ecio> Name Type Default Description <rssi> integer Received Signal Strength Indication. For <rssi> to be compliant with 3GPP TS27.007 specification, levels are mapped to range 0...31. Values: : -113 dBm or less : -111 dBm...
Page 421 LE910Cx AT Commands Reference Guide : -18...-16 dBm : -22...-19 dBm : -24...-23 dBm 99 : not known or not detectable TDSCDMA Networks The execution command returns the following message: +CSQ: <rssi>,<ecio> Name Type Default Description <rssi> integer Received Signal Strength Indication. For <rssi>...
Page 422 LE910Cx AT Commands Reference Guide : -5...-2 dBm : -8...-6 dBm : -11...-9 dBm : -15...-12 dBm : -18...-16 dBm : -22...-19 dBm : -24...-23 dBm 99 : not known or not detectable NOTE: this command should be used instead of the %Q and %L commands, since GSM/WCDMA relevant parameters are the radio link ones and no line is present, hence %Q and %L have no meaning...
Page 423: At#Servinfo - Serving Cell Information
LE910Cx AT Commands Reference Guide 3.4.19. AT#SERVINFO - Serving Cell Information This command reports information about the serving cell. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#SERVINFO Execution command reports information about serving cell. The information and the format of the returned message depends on the network type.
Page 424 LE910Cx AT Commands Reference Guide <BSIC> string Base Station Identification Code <TA> integer Time Advance: it is available only if a GSM or GPRS is running. <GPRS> integer GPRS supported in the cell Values: 0 : not supported 1 : supported <BARFCN>...
Page 425 LE910Cx AT Commands Reference Guide <SD> integer Service Domain Values: 0 : No Service 1 : CS only 2 : PS only 3 : CS & PS <RSCP> integer Received Signal Code Power in dBm. <EARFCN> integer LTE Assigned Radio Channel <PhysicalCellId>...
Page 426 LE910Cx AT Commands Reference Guide AT#SERVINFO=? Test command returns OK result code. 80502ST10950A Rev. 14 Page 426 of 1904 2022-03-04 Not Subject to NDA...
Page 427: At#Nwen - Network Emergency Number Update
LE910Cx AT Commands Reference Guide 3.4.20. AT#NWEN - Network Emergency Number Update This command enables the unsolicited result code of emergency number update. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT#NWEN=[<en>] Set command enables/disables the URC for emergency number update. The URC format is: #NWEN: <type>...
Page 428 LE910Cx AT Commands Reference Guide number list update from network Entering AT#NWEN= returns OK but has no effect. AT#NWEN? Read command reports whether the unsolicited indication of network emergency number update is currently enabled or not, in the format: #NWEN: <en> AT#NWEN=? Test command reports the range for the parameter <en>...
Page 429: At#Bcchlock - Lock To Single Bcch Arfcn
LE910Cx AT Commands Reference Guide 3.4.21. AT#BCCHLOCK - Lock to Single BCCH ARFCN This command enables/disable the single BCCH ARFCN locking. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#BCCHLOCK=<LockedBcch>[,<LockedUarfcn>[,<LockedPsc>[,<LockedEarfcn>[ ,<LockedPci>]]]] This command allows to set the single BCCH ARFCN(also UARFCN and EARFCN) the device must be locked to, selectable within those allowed for the specific product.
Page 430 LE910Cx AT Commands Reference Guide supported according to product band configuration). <LockedPsc> integer 65535 enable/disable 3G BCCH locking Primary Scrambling Code selection Values: 65535 : disable 0÷511 : Primary Scrambling Code <LockedEarfcn> integer A number in the range 0-68935 representing the earfcn to search. An value of 0 will remove the earfcn restriction and any associated Physical Cell ID lock.
Page 431 LE910Cx AT Commands Reference Guide Note that the use of <LockedPsc> must be used with <LockedUarfcn> and never use <LockedPsc> alone. In other words, if <LockedUarfcn> is 0, <LockedPsc> must not have a specific value other than 65535. If you set <LockedPsc>...
Page 432 LE910Cx AT Commands Reference Guide #BCCHLOCK setting has higher priority than PLMN selection, that is why it is not recommended to use this command together with manual PLMN selection +COPS=1. In the situation that LTE locked function is used so certain frequency and PCI should be fixed, if the handover event comes down from the network or it is in poor signal strength environment, the RLF may occur continuously.
Page 433: At#Plmnmode - Plmn List Selection
LE910Cx AT Commands Reference Guide 3.4.22. AT#PLMNMODE - PLMN List Selection Set command apply to new operator names depending on the parameter <mode>. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#PLMNMODE=<mode> Parameter: Name Type Default Description <mode>...
Page 434 LE910Cx AT Commands Reference Guide AT#PLMNMODE=? Test command returns the supported range of values for parameter <mode>. 80502ST10950A Rev. 14 Page 434 of 1904 2022-03-04 Not Subject to NDA...
Page 435: At#Fplmn - Periodical Fplmn Cleaning
LE910Cx AT Commands Reference Guide 3.4.23. AT#FPLMN - Periodical FPLMN Cleaning Periodically delete the Forbidden PLMN list stored inside the SIM card, clear it or list it. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT#FPLMN=<action>[,<period>] The set command is used to manage the Forbidden PLMN List file (FPLMN) stored in the SIM card.
Page 436 LE910Cx AT Commands Reference Guide AT#FPLMN=? Test command reports available values for parameters <action> and <period> 80502ST10950A Rev. 14 Page 436 of 1904 2022-03-04 Not Subject to NDA...
Page 437: At#Codec - Gsm And Umts Audio Codec
LE910Cx AT Commands Reference Guide 3.4.24. AT#CODEC - GSM and UMTS Audio Codec GSM and UMTS audio codec mode settings 3GPP TS 24.008 SIM Presence Setting saved Can be aborted MAX timeout SELINT Common Not required profile AT#CODEC=[<codec>] Set command sets the GSM and UMTS audio codec mode. Parameter: Name Type...
Page 438 LE910Cx AT Commands Reference Guide Full rate mode is added by default to any setting in the SETUP message (as specified in 3GPP TS 24.008), but the call drops if the network assigned codec mode has not been selected by the user. AT#CODEC=4 and AT#CODEC=16 are not recommended;...
Page 439: At#Bnd - Select Band
LE910Cx AT Commands Reference Guide 3.4.25. AT#BND - Select Band This command selects RF bands SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#BND=<band>[,<UMTS_band>[,<LTE_band>[,<TDSCDMA_band>]]] Set command selects the current GSM, UMTS, LTE, and TDSCDMA bands. Parameters: Name Type...
Page 440 LE910Cx AT Commands Reference Guide : B2 (1900 MHz) : B5 (850 MHz) : B1 (2100 MHz) + B2 (1900 MHz) + B5 (850 MHz) : B2 (1900 MHz) + B5 (850 MHz) : B8 (900 MHz) : B1 (2100 MHz) + B8 (900 MHz) : B4 (1700 MHz) : B1 (2100 MHz) + B5 (850 MHz) : B1 (2100 MHz) + B8 (900 MHz) + B5 (850...
Page 441 LE910Cx AT Commands Reference Guide 20 : B5 (850 MHz) + B6 (800 MHz) 21 : B2 (1900 MHz) + B5 (850 MHz) + B6 (800 MHz) 22 : B1 (2100 MHz) + B3 (1800 MHz) + B5 (850 MHz) + B8 (900 MHz) 23 : B1 (2100 MHz) + B3 (1800 MHz) 24 : B1 (2100 MHz) + B2 (1900 MHz) + B4 (1700 MHz) + B5 (850 MHz)
Page 442 LE910Cx AT Commands Reference Guide 0x00800 : EUTRAN BAND12 0x01000 : EUTRAN BAND13 0x02000 : EUTRAN BAND14 0x10000 : EUTRAN BAND17 0x80000 : EUTRAN BAND20 0x1000000 : EUTRAN BAND25 0x2000000 : EUTRAN BAND26 0x8000000 : EUTRAN BAND28 0x00200000000 : EUTRAN BAND34 0x02000000000 : EUTRAN BAND38 0x04000000000...
Page 443 LE910Cx AT Commands Reference Guide 127 - GSM/WCDMA invalid value FFFFFFFFFFFFFFFF - LTE/TDSCDMA invalid value for all models In set command LTE/TDSCDMA band mask should be entered in HEX format without "0x". In Read and test commands it also appears without "0x". In set command, "NULL"...
Page 444 LE910Cx AT Commands Reference Guide AT#BND=? Test command returns the supported range of values of parameters In case module does not support TDS-CDMA <band>, <UMTS_band> and <LTE_band> In case module supports TDS-CDMA <band>, <UMTS_band>,<LTE_band>, and <TDSCDMA_band> Set command AT#BND=5,15,800C5 AT#BND=5,,800C5 Test command AT#BND=? #BND: (0-5),(0,5,6,13,15),(800C5)
Page 445: At#Autobnd - Automatic Band Selection
LE910Cx AT Commands Reference Guide 3.4.26. AT#AUTOBND - Automatic Band Selection This command has no effect and is included only for backward compatibility. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#AUTOBND=[<value>] Parameter: Name Type Default Description <value>...
Page 446: At#Snum - Subscriber Number
LE910Cx AT Commands Reference Guide 3.4.27. AT#SNUM - Subscriber Number This command writes the MSISDN information related to the subscriber (own number) in the EFmsisdn SIM file. 3GPP TS 51.011 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT#SNUM=<index>[,<number>[,<alpha>]] This set command writes the MSISDN information related to the...
Page 447 LE910Cx AT Commands Reference Guide string is given (""), the corresponding <alpha> will be an empty string. The command returns ERROR if EFmsisdn file is not present in the SIM, or if MSISDN service is not allocated and activated in the SIM Service Table, see 3GPP TS 51.011.
Page 448: At#Psnt - Packet Service Network Type
LE910Cx AT Commands Reference Guide 3.4.28. AT#PSNT - Packet Service Network Type The command enables/disables unsolicited result code for packet service network type (PSNT) SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT#PSNT=[<mode>] Set command enables/disables unsolicited result code for packet service network type (PSNT) having the following format: #PSNT:<nt>...
Page 449 LE910Cx AT Commands Reference Guide GPRS network EGPRS network WCDMA network HSDPA network LTE network unknown or not registered <is_hsupa_available> integer HSUPA available Values: 0 : HSUPA is not supported by network 1 : HSUPA is supported by network <is_hsupa_used> integer HSUPA used Values: HSUPA is not in used...
Page 450 LE910Cx AT Commands Reference Guide When the type of network is HSPA, the indication is certainly valid during traffic, while it could be not valid in idle because it depends on network broadcast parameters. AT#PSNT? If <mode> is set to 0 or 1, read command returns the current values of the <mode>...
Page 451: At#Encalg - Set Encryption Algorithm
LE910Cx AT Commands Reference Guide 3.4.29. AT#ENCALG - Set Encryption Algorithm This command enables or disables the GSM and/or GPRS encryption algorithms supported by the module. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#ENCALG=[<encGSM>][,<encGPRS] Set command enables or disables the GSM and/or GPRS encryption algorithms supported by the module.
Page 452 LE910Cx AT Commands Reference Guide bit 0 = GEA1 bit 1 = GEA2 bit 2 = GEA3 bits 3 - 7 = reserved for future Values: : no GPRS encryption algorithm 1÷7 : sum of integers each representing a specific GPRS encryption algorithm: 1 –...
Page 453 LE910Cx AT Commands Reference Guide <usedGSM> integer GSM encryption algorithm Values: : no GSM encryption algorithm : A5/1 : A5/2 : A5/3 255 : not available <usedGPRS> integer GPRS encryption algorithms Values: : no GPRS encryption algorithm : GEA1, GEA2 : GEA3 255 : not available AT#ENCALG=?
Page 454 LE910Cx AT Commands Reference Guide AT#ENCALG? #ENCALG: 5,2,1,1 AT#ENCALG=5,1 Sets the GSM encryption algorithm A5/1 and A5/3, and the GPRS encryption algorithm GEA1. It will be available at the next reboot. AT#ENCALG? #ENCALG: 5,2,1,1 The last two values indicate that the last used GSM encryption algorithm is A5/1 and the last used GPRS encryption algorithm is GEA1 After reboot AT#ENCALG?
Page 455: At+Cemode - Set Mode Of Operation For Eps
LE910Cx AT Commands Reference Guide 3.4.30. AT+CEMODE - Set Mode of Operation for EPS This command used to configure the mode of operation for EPS. 3GPP TS 24.301 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT+CEMODE=[<mode>] This set command configures the mode of operation for EPS.
Page 456 LE910Cx AT Commands Reference Guide The definition for UE modes of operation can be found in 3GPP TS 24.301 [83]. Other values are reserved and will result in an ERROR response to the set command. AT+CEMODE? Read command returns the current value of parameter <mode> in the format: +CEMODE: <...
Page 457: At+Cpner - Primary Notification Event Reporting
LE910Cx AT Commands Reference Guide 3.4.31. AT+CPNER - Primary Notification Event Reporting This command enables/disables reporting of primary notification events received from the network. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT+CPNER=<reporting> Set command enables and disables reporting of primary notification events when received from the network with unsolicited result code.
Page 458 LE910Cx AT Commands Reference Guide <serial_number> string in hexadecimal character format. The parameter contains the serial number (2 bytes) of the primary notification. <warning_type> string in hexadecimal character format. The parameter contains the warning type (2 bytes) of the primary notification. AT+CPNER? Read command reports the current value of the parameter.
Page 459: At+Cesq - Extended Signal Quality
LE910Cx AT Commands Reference Guide 3.4.32. AT+CESQ - Extended Signal Quality Execution command returns received signal quality parameters according to the network on which the module is registered. [1] 3GPP TS 27.007 [2] 3GPP TS 45.008 [3] 3GPP TS 25.133 [4] 3GPP TS 36.133 SIM Presence Setting saved...
Page 460 LE910Cx AT Commands Reference Guide +CESQ: 99,99,255,255,<rsrq>,<rsrp> Name Type Default Description <rxlev> integer received signal strength level, see 3GPP TS 45.008 subclause 8.1.4. Values: : rssi < -110 dBm : -110 dBm ≤ rssi < -109 dBm : -109 dBm ≤ rssi < -108 dBm : ...
Page 461 LE910Cx AT Commands Reference Guide : rscp < -120 dBm : -120 dBm ≤ rscp < -119 dBm : -119 dBm ≤ rscp < -118 dBm : ... : -27 dBm ≤ rscp < -26 dBm : -26 dBm ≤ rscp < -25 dBm : -25 dBm ≤...
Page 462 LE910Cx AT Commands Reference Guide Values: : rsrq < -19.5 dB : -19.5 dB ≤ rsrq < -19.0 dB : -19.0 dB ≤ rsrq < -18.5 dB : ... : -4 dB ≤ rsrq < -3.5 dB : -3.5 dB ≤ rsrq < -3 dB : -3 dB ≤...
Page 463 LE910Cx AT Commands Reference Guide Test command returns values supported as compound values. 80502ST10950A Rev. 14 Page 463 of 1904 2022-03-04 Not Subject to NDA...
Page 464: At#Ens - Enhanced Network Selection
LE910Cx AT Commands Reference Guide 3.4.33. AT#ENS - Enhanced Network Selection Set command is used to activate the Enhanced Network Selection (ENS) functionality. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#ENS=[<mode>] Set command is used to activate the ENS functionality Parameter: Name Type...
Page 465 LE910Cx AT Commands Reference Guide AT#ENS=? Test command reports the available range of values for parameter <mode> 80502ST10950A Rev. 14 Page 465 of 1904 2022-03-04 Not Subject to NDA...
Page 466: At+Ws46 - Pcca Std-101 Select Wireless Network
LE910Cx AT Commands Reference Guide 3.4.34. AT+WS46 - PCCA STD-101 Select Wireless Network This command selects the cellular network (Wireless Data Service, WDS). 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT+WS46=[<n>] Set command selects the cellular network (Wireless Data Service, WDS) to operate with the TA (WDS-Side Stack Selection).
Page 467 LE910Cx AT Commands Reference Guide 22 : UTRAN only 25 : 3GPP Systems (GERAN and UTRAN and E-UTRAN) 28 : E-UTRAN only 29 : GERAN and UTRAN 30 : GERAN and E-UTRAN 31 : UTRAN and E-UTRAN 32 : TDSCDMA only 33 : GERAN and TDSCDMA 34 : TDSCDMA and E-UTRAN 35 : GERAN and TDSCDMA and E-UTRAN...
Page 468 LE910Cx AT Commands Reference Guide LE910Cx-CN: GERAN and TDSCDMA and UTRAN and E-UTRAN AT+WS46? Read command reports the currently selected cellular network, in the format: + WS46: <n> AT+WS46=? Test command reports the range for the parameter <n>. 80502ST10950A Rev. 14 Page 468 of 1904 2022-03-04 Not Subject to NDA...
Page 469: At+Cedrxs - Edrx Setting
LE910Cx AT Commands Reference Guide 3.4.35. AT+CEDRXS - eDRX Setting This command controls the setting of the UEs eDRX parameters. 3GPP TS 27.007 3GPP TS 24.008 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT+CEDRXS=[<mode>[,<AcTtype>[,<Req_eDRX>]]] Set command controls the setting of the UEs eDRX parameters.
Page 470 LE910Cx AT Commands Reference Guide <AcTtype> integer type of access technology. Values: 1 : CAT M1 2 : GSM (A/Gb mode) 3 : UTRAN (lu mode) 4 : E-UTRAN (WB-S1 mode) 5 : E-UTRAN (NB1-S1 mode) <Req_eDRX> string half a byte in a 4-bit format. The eDRX value refers to bit 4 to 1 of octet 3 of the Extended DRX parameters information element (see subclause...
Page 471 LE910Cx AT Commands Reference Guide 3GPP TS 24.008). For the coding and the value range, see Extended DRX parameters information element in 3GPP TS 24.008 Table 10.5.5.32/3GPP TS 24.008. <PagTimeWindow> string half a byte in a 4-bit format. The paging time window refers to bit 8 to 5 of octet 3 of the Extended DRX parameters information...
Page 472 LE910Cx AT Commands Reference Guide The +CEDRXS command is executed only when it has LTE radio technology. AT+CEDRXS? Read command returns the current settings for each defined value of <AcTtype>. AT+CEDRXS=? Test command returns the supported <mode>s and the value ranges for the access technology and the requested eDRX value as compound values.
Page 473: At+Cedrxrdp - Edrx Read Dynamic Parameters
LE910Cx AT Commands Reference Guide 3.4.36. AT+CEDRXRDP - eDRX Read Dynamic Parameters This command returns a message related to Extended Discontinuous Reception (eDRX). 3GPP TS 27.007 3GPP TS 24.008 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT+CEDRXRDP Execution command returns the following message if eDRX is used for the cell that the MS is currently registered to, in the format:...
Page 474 LE910Cx AT Commands Reference Guide 1 : CAT M1 2 : GSM (A/Gb mode) 3 : UTRAN (Iu mode) 4 : E-UTRAN (WB-S1 mode) 5 : E-UTRAN (NB-S1 mode) <Requested_eDRX_value> string half a byte in a 4 bit format. The eDRX value refers to bit 4 to 1 of octet 3 of the...
Page 475 LE910Cx AT Commands Reference Guide 10.5.5.32 of 3GPP TS 24.008). For the coding and the value range, see Extended DRX parameters information element in 3GPP TS 24.008 Table 10.5.5.32/3GPP TS 24.008. <Paging_time_window> string half a byte in a 4 bit format. The paging time window referes to bit 8 to 5 of...
Page 476 LE910Cx AT Commands Reference Guide The only "4 - E-UTRAN (WB-S1 mode)" of <AcT-type> could be supported. The CEDRXRDP command is excuted only when it has LTE radio technology. AT+CEDRXRDP=? Test command returns the OK result code. 80502ST10950A Rev. 14 Page 476 of 1904 2022-03-04 Not Subject to NDA...
Page 477: At+Cereg - Eps Network Registration Status
LE910Cx AT Commands Reference Guide 3.4.37. AT+CEREG - EPS Network Registration Status This command monitors the Evolved Packet System (EPS) network registration status in LTE. [1] 3GPP TS 24.008 [2] 3GPP TS 24.301 [3] 3GPP TS 25.331 SIM Presence Setting saved Can be aborted MAX timeout SELINT...
Page 478 LE910Cx AT Commands Reference Guide URC long format is displayed every time there is a change of network cell in LTE. Values: 0 : disable the network registration unsolicited result code 1 : enable the network registration unsolicited result code, and select the short format 2 : enable the network registration unsolicited result code, and selects the long format (includes the network cell identification data)
Page 479 LE910Cx AT Commands Reference Guide considered as attached for emergency bearer services. (not applicable). : registered for "CSFB not preferred", home network (not applicable). 10 : registered for "CSFB not preferred", roaming (not applicable). <tac> string tracking area code (two bytes) in hexadecimal format (e.g.
Page 480 LE910Cx AT Commands Reference Guide AT+CEREG? Read command returns the current value of <mode>, the registration status <stat>, and the information <tac>, <ci>, <AcT> according to the current <mode> parameter value. +CEREG: <mode>,<stat>[,[<tac>],[<ci>],[<AcT>]] <tac>, <ci> and <AcT> are reported only if <mode>=2 and the mobile is registered on some network cell.
Page 481: At#Rfsts - Read Current Network Status
LE910Cx AT Commands Reference Guide 3.4.38. AT#RFSTS - Read Current Network Status Command reads current network status. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT#RFSTS Execution command returns the current network status. The format of the returned message is according to the network on which the module is registered.
Page 482 LE910Cx AT Commands Reference Guide WCDMA network #RFSTS: <PLMN>,<UARFCN>,<PSC>,<Ec/Io>,<RSCP>,<RSSI>,<LAC>,<RAC>,[<TXPWR>],<DRX >,<MM>,<RRC>,<NOM>,[<BLER>],<CID>,<IMSI>,[<NetNameAsc>],<SD>,[<CsAccess> ],[<PsAccess>],<nAST>[,<nUARFCN><nPSC>,<nEc/Io>,,,,],<ABND> [CR,LF] [CR,LF] Parameter WCDMA Example Description PLMN "450 05" Country code and operator code (MCC, MNC) UARFCN 10737 UMTS Assigned Radio Channel Active PSC (Primary Synchronization Code) Ec/Io -7.0 Active Ec/Io (chip energy per total wideband power in dBm) RSCP...
Page 483 LE910Cx AT Commands Reference Guide CS+PS, 4 : Camped) Circuit Switch Access (0: Normal calls only, CsAccess 1: Emergency calls only, 2: No calls, 3: All calls) Packet Switch Access (0: Normal calls only, PsAccess 1: Emergency calls only, 2: No calls, 3: All calls) Number of...
Page 484 LE910Cx AT Commands Reference Guide PLMN "262 25" Country code and operator code (MCC, MNC) EARFCN 6400 E-UTRA Assigned Radio Channel RSRP Reference Signal Received Power RSSI Received Signal Strength Indication RSRQ Reference Signal Received Quality 40A5 Tracking Area Code TXPWR Tx Power (In traffic only) Discontinuous reception cycle Length(cycle...
Page 485 LE910Cx AT Commands Reference Guide 9 - WAIT_FOR_NETWORK_COMMAND 10 - LOCATION_UPDATE_REJECTED 13 - WAIT_FOR_RR_CONNECTION_LU 14 - WAIT_FOR_RR_CONNECTION_MM 15 - WAIT_FOR_RR_CONNECTION_IMSI_DETACH 17 - REESTABLISHMENT_INITIATED 18 - WAIT_FOR_RR_ACTIVE 19 - IDLE 20 - WAIT_FOR_ADDITIONAL_OUTGOING_MM_CONNECTION 21 - WAIT_FOR_RR_CONNECTION_REESTABLISHMENT 22 - WAIT_FOR_REESTABLISH_DECISION 23 - LOCATION_UPDATING_PENDING 25 - CONNECTION_RELEASE_NOT_ALLOWED MM (LTE) - Mobility Management States are: 0 - NULL...
Page 486 LE910Cx AT Commands Reference Guide 6 - CELL_RESELECTION 7 - CONNECTION_PENDING 8 - CELL_REESTABLISH 9 - DATA_TRANSFER 10 - NO_CHANNELS 11 - CONNECTION_RELEASE 12 - EARLY_CAMPED_WAIT_FOR_SI 13 - W2G_INTERRAT_HANDOVER_PROGRESS 14 - W2G_INTERRAT_RESELECTION_PROGRESS 15 - W2G_INTERRAT_CC_ORDER_PROGRESS 16 - G2W_INTERRAT_RESELECTION_PROGRESS 17 - WAIT_FOR_EARLY_PSCAN 18 - GRR 19 - G2W_INTERRAT_HANDOVER_PROGRESS 21 - W2G_SERVICE_REDIRECTION_IN_PROGRESS...
Page 487 LE910Cx AT Commands Reference Guide 2 - RRC_STATE_CELL_FACH 3 - RRC_STATE_CELL_DCH 4 - RRC_STATE_CELL_PCH 5 - RRC_STATE_URA_PCH 6 - RRC_STATE_WILDCARD 7 - RRC_INVALID RRC (LTE) - Radio Resource Control States are: 0 - RRC_IDLE 1 - RRC_CONNECTED AT#RFSTS=? Test command returns OK result code. 80502ST10950A Rev.
Page 488: At#Spn - Read Sim Field Spn
LE910Cx AT Commands Reference Guide 3.4.39. AT#SPN - Read SIM Field SPN This command reads SIM fields SPN. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT#SPN Execution command returns the service provider string contained in the SIM field SPN, in the format: #SPN: <spn>...
Page 489: At#Chbhcid - Change Context Id
LE910Cx AT Commands Reference Guide 3.4.40. AT#CHBHCID - Change Context ID This command is used to change CID (Context ID) of backhaul connection. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT#CHBHCID=<IPFamily>,<CID> Set command used to change CID (Context ID) for a backhaul (internal application processor data interface) connection.
Page 490 LE910Cx AT Commands Reference Guide AT#CHBHCID? #CHBHCID: 10,20 AT#CHBHCID=? Show usage at#chbhcid=? #chbhcid: (4,6),(1-24) 80502ST10950A Rev. 14 Page 490 of 1904 2022-03-04 Not Subject to NDA...
Page 491: Event
LE910Cx AT Commands Reference Guide 3.4.41. AT#LTEULOOS - Enable or Disable for reporting EVENT_LTE_UL_OUT_OF_SYNC event This command is enabled or disabled for reporting EVENT_LTE_UL_OUT_OF_SYNC event. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#LTEULOOS=<mode> Set command enables/disables EVENT_LTE_UL_OUT_OF_SYNC event reports depending on the parameter <mode>.
Page 492 LE910Cx AT Commands Reference Guide #LTEULOOS: <mode> AT#LTEULOOS=? Test command reports the supported range of values. 80502ST10950A Rev. 14 Page 492 of 1904 2022-03-04 Not Subject to NDA...
Page 493: At#Allowhac - Allow Network Access With High Access Class Only
LE910Cx AT Commands Reference Guide 3.4.42. AT#ALLOWHAC - Allow Network Access with high Access Class only This command is enabled or disabled to control High-Access-class-only modules to camp onto the network. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto...
Page 494 LE910Cx AT Commands Reference Guide #ALLOWHAC: <mode> AT#ALLOWHAC=? Test command returns all supported values of the parameter <mode>. There is a possibility that this may cause GCF failures in the existing GCT test cases. There is a possibility that any new GCF test cases could fail. There is a possibility that some carriers do not want UE to camp onto the network when only High Access class is enabled in the SIM.
Page 495: At#Moni - Cell Monitor
LE910Cx AT Commands Reference Guide 3.4.43. AT#MONI - Cell Monitor This command is both a set and an execution command. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT#MONI[=[<number>]] Set command sets one cell out of seven, in a neighbor list of the serving cell including it, from which extract GSM/LTE related information.
Page 496 LE910Cx AT Commands Reference Guide : it is a special request to obtain GSM- related information from the whole set of seven cells in the neighbor list of the serving cell LTE network Name Type Default Description <number> integer LTE network Values: : it is the serving cell : it is the intra-frequency cells...
Page 497 LE910Cx AT Commands Reference Guide #MONI: <netname> BSIC:<bsic> RxQual:<qual> LAC:<lac> Id:<id> ARFCN:<arfcn> PWR:<dBm> dBm TA: <timadv> LTE network #MONI: <netmame> RSRP:<rsrp> RSRQ:<rsrq> TAC:<tac> Id:<id> EARFCN:<earfcn> PWR:<dBm> DRX:<drx> pci:<physicalCellId> QRxLevMin:<QRxLevMin> b) When the network name is unknown, the format is: GSM network #MONI: <cc>...
Page 498 LE910Cx AT Commands Reference Guide #MONI: Adj Cell<n> BSIC:<bsic> ARFCN:<arfcn> PWR:<dBm> Name Type Default Description <netname> string name of network operator <cc> string country code <nc> string network operator code <n> integer progressive number of adjacent cell <bsic> string base station identification code <qual>...
Page 499 LE910Cx AT Commands Reference Guide <rsrq> integer Reference Signal Received Quality <tac> integer Tracking Area Code <earfcn> integer E-UTRA Assigned Radio Channel <QRxLevMin> integer minimum required RX level in the cell TA: <timadv> reported only for the serving cell. When AT#MONI=7 is the last setting entered, the execution command AT#MONI<CR>...
Page 500 LE910Cx AT Commands Reference Guide Name Type Default Description <MaxCellNo> integer maximum number of cells in a neighbor of the serving cell and excluding it from which we can extract GSM/LTE related information. This value is always 6. <CellSet> integer last setting done with command #MONI.
Page 501 LE910Cx AT Commands Reference Guide The module supports GSM network AT+WS46? +WS46: 30 AT+CREG? +CREG: 0,1 AT#MONI=1 AT#MONI=? #MONI: (6,1) AT#MONI #MONI: I TIM BSIC:25 RxQual:0 LAC:D5BD Id:3A27 ARFCN:1018 PWR:- 72dbm TA:-1 AT#MONI=7 AT#MONI=? #MONI: (6,7) AT#MONI #MONI: Cell BSIC LAC CellId ARFCN Power C1 C2 TA RxQual PLMN #MONI: S 25 D5BD 3A27 1018 -74dbm...
Page 502: At#Brcsfb - Blind G2L Redirection After Csfb
LE910Cx AT Commands Reference Guide 3.4.44. AT#BRCSFB - Blind G2L redirection after CSFB This command enables/disables blind GSM to LTE redirection after CS fallback Parameters. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#BRCSFB=<par> This command enables/disables blind GSM to LTE redirection after CS fallback Parameters.
Page 503 LE910Cx AT Commands Reference Guide #BRCSFB: <state> Name Type Default Description <state> integer current state of blind G2L redirection after CSFB AT#BRCSFB=? Test command reports the supported range of values for parameter <par>. 80502ST10950A Rev. 14 Page 503 of 1904 2022-03-04 Not Subject to NDA...
Page 504: At#Selbndmode - Select Band Configuration Mode
LE910Cx AT Commands Reference Guide 3.4.45. AT#SELBNDMODE - Select Band configuration mode This command selects band configuration mode SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#SELBNDMODE=[<mode>] Set command configures the mode of band set between #BND and #BNDRAM.
Page 505: At#Manageroam - Managed Roam Feature
LE910Cx AT Commands Reference Guide 3.4.46. AT#MANAGEROAM - Managed Roam feature This command sets the Managed Roam feature. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#MANAGEROAM=<mgrf>,<auto_reject> Set command enables/disables specific features. Parameters: Name Type Default Description <mgrf>...
Page 506 LE910Cx AT Commands Reference Guide - LE910C1-EUX/SVX - LE910Cx-WWX BELL/TELUS/VZW AT#MANAGEROAM? Read command returns the current parameter value. AT#MANAGEROAM=? Test command returns the range of supported parameters. 80502ST10950A Rev. 14 Page 506 of 1904 2022-03-04 Not Subject to NDA...
Page 507: At#Gtuneant - Get Tunable Anternna Interface
LE910Cx AT Commands Reference Guide 3.4.47. AT#GTUNEANT - Get Tunable Anternna Interface This command is get for Tunable Antenna Interface. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#GTUNEANT? Read command for Tunable Antenna Interface. Specific GPIO pin is available on the host interface that can be connected to an external antenna switch.
Page 508 LE910Cx AT Commands Reference Guide #1 Gpio used and supported band is lte:2,4,5,12,13,14,66,71 wcdma:2,4,5, so All mask value is D6071A for LE910Cx-NF. AT#GPIO=2,0,17 AT#STUNEANT=1,2,1 ->GPIO2 high set for LTE BAND2 AT#GTUNEANT? #GTUNEANT: 2,1 #GTUNEANT: D60718,0 ->GPIO2 low set except LTE BAND2 (LTE 4,5,12,13,14,66,71 / WCDMA:2,4,5) #2 Gpio used and supported band is lte:2,4,5,12,13,14,66,71 wcdma:2,4,5, so All mask value is D6071A for LE910Cx-NF.
Page 509: At#Sdomain - Supplementary Service Domain Preference
LE910Cx AT Commands Reference Guide 3.4.48. AT#SDOMAIN - Supplementary service domain preference This command allows to selects service domain preference. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#SDOMAIN=[<Sdomain>],[<USdomain>] Set command allows to selects service domain preference. Parameters: Name Type...
Page 510 LE910Cx AT Commands Reference Guide For AT&T/Softbank/KDDI variants, the default value is 2. (except for LE910C1-SA) AT#SDOMAIN? Read command returns the current value of parameters AT#SDOMAIN=? Test command returns all supported values of the parameters 80502ST10950A Rev. 14 Page 510 of 1904 2022-03-04 Not Subject to NDA...
Page 511: At#Nwscantmr - Network Scan Timer
LE910Cx AT Commands Reference Guide 3.4.49. AT#NWSCANTMR - Network Scan Timer This command sets the Network Scan Timer. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#NWSCANTMR=<tmr> Set command sets the Network Scan Timer that is used by the module to schedule the next network search when it is without network coverage (no signal).
Page 512 LE910Cx AT Commands Reference Guide AT#NWSCANTMR? Read command reports the current parameter setting in the format: #NWSCANTMR: <tmr> AT#NWSCANTMR=? Test command reports the supported range of values How much time it takes to execute the network scan depends either on how much bands have been selected and on network configuration (mean value is 5 seconds) 80502ST10950A Rev.
Page 513: At#Nasc - Non-Access-Stratum Compliancy
LE910Cx AT Commands Reference Guide 3.4.50. AT#NASC - Non-Access-Stratum compliancy This command allows to selects NAS compliancy. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#NASC=[<mode>] Set command allows to selects NAS compliancy. Parameter: Name Type Default Description...
Page 514 LE910Cx AT Commands Reference Guide Default value of <mode> for TMO firmwares(ST, NF-TMO) are configured to '3' and for NTT firmwares are configured to '5' and for KDDI firmwares are not configured and for the others are '2'. AT#NASC? Read command returns the current value of parameter <mode>. AT#NASC=? Test command returns all supported values of the parameter <mode>.
Page 515: At+Cdip - Called Line Identification Presentation
LE910Cx AT Commands Reference Guide 3.4.51. AT+CDIP - Called line identification presentation This command enables/disables the presentation of the CLI at the TE. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CDIP=[<n>] Set command enables/disables the presentation of the CLI (called line identifications) at the TE.
Page 516 LE910Cx AT Commands Reference Guide Name Type Description <number> string phone number of format specified by <type> <type> string type of address octet in integer format (refer 3GPP TS 24.008 subclause 10.5.4.7) <subaddr> string string type subaddress of format specified by <satype>...
Page 517 LE910Cx AT Commands Reference Guide 0 : "multiple called numbers service" is not provisioned 1 : "multiple called numbers service" is provisioned 2 : unknown (e.g. no network, etc.) AT+CDIP=? Test command returns the range for the parameter <n>. 80502ST10950A Rev. 14 Page 517 of 1904 2022-03-04 Not Subject to NDA...
Page 518: At+Clip - Calling Line Identification Presentation
LE910Cx AT Commands Reference Guide 3.4.52. AT+CLIP - Calling Line Identification Presentation This command enables/disables the presentation of the CLI (Calling Line Identity). 3GPP TS 27.007 3GPP TS 22.081 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Specific profile AT+CLIP=[<enable>] Set command refers to the supplementary service CLIP (Calling...
Page 519 LE910Cx AT Commands Reference Guide Name Type Description <number> string phone number of format specified by <type> <type> integer type of address octet Values: 128 : both the type of number and the numbering plan are unknown 129 : unknown type of number and ISDN/Telephony numbering plan 145 : international type of number and ISDN/Telephony numbering plan...
Page 520 LE910Cx AT Commands Reference Guide AT+CLIP? Read command returns the presentation status of the CLI in the format: +CLIP: <enable>,<status> Additional info: Parameters: Name Type Default Description <enable> integer status of the local setting Values: 0 : CLI presentation disabled 1 : CLI presentation enabled <status>...
Page 521: At+Colr - Connected Line Identification Restriction Status
LE910Cx AT Commands Reference Guide 3.4.53. AT+COLR - Connected Line Identification Restriction status This command refers to the GSM/UMTS supplementary service COLR (Connected Line Identification Restriction) that enables a called subscriber to restrict the possibility of presentation of connected line identity (COL) to the calling party after receiving a mobile terminated call 3GPP TS 22.081 SIM Presence...
Page 522 LE910Cx AT Commands Reference Guide Values: 0 : COLR not provisioned 1 : COLR provisioned 2 : unknown (example: no network, etc.) Activation, deactivation, registration and erasure of the supplementary service COLR are not applicable. AT+COLR=? Test command tests for command existence 80502ST10950A Rev.
Page 523: At+Ccfc - Call Forwarding Number And Condition
LE910Cx AT Commands Reference Guide 3.4.54. AT+CCFC - Call Forwarding Number And Condition This command controls the call forwarding supplementary service. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CCFC=<reason>,<cmd>[,<number>[,<type>[,<class>[,<time>]]]] The execution command controls the call forwarding supplementary service.
Page 524 LE910Cx AT Commands Reference Guide 1 : enable 2 : query status 3 : registration 4 : erasure <number> string string type phone number of forwarding address in format specified by <type> parameter <type> integer type of address octet in integer format Values: 129 : National numbering scheme 145 : International numbering scheme (contains the...
Page 525 LE910Cx AT Commands Reference Guide 1÷30 : automatically rounded to a multiple of 5 seconds Additional info: when <cmd>=2 and command successful, it returns: +CCFC: <status>,<class >[,<number>,<type>[,,,<time>]][<CR><LF> +CCFC: <status>,<class >[,<number>,<type>[,,,<time>]][ ... ]] Name Type Default Description <status> integer status of the network service Values: 0 : not active 1 : active...
Page 526 LE910Cx AT Commands Reference Guide AT+CCFC=0,2 - To check if the unconditional call forwarding is on or off. AT+CCFC=0,3,"Nunber" - To register the unconditional call forwarding to the network. AT+CCFC=0,1,"Nunber" - To activate the unconditional call forwarding. AT+CCFC=0,0 - To deactivate the unconditional call forwarding. AT+CCFC=0,3,"+972575684414"...
Page 527: At+Ccwa - Call Waiting
LE910Cx AT Commands Reference Guide 3.4.55. AT+CCWA - Call Waiting This command allows control of the supplementary service Call Waiting. Activation, deactivation and status query are supported. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Specific profile AT+CCWA=[<n>[,<cmd>[,<class>]]]...
Page 528 LE910Cx AT Commands Reference Guide 0 : disable 1 : enable 2 : query status <class> integer sum of integers each representing a class of information which the command refers to; default is 7 (voice + data + fax) 1 voice(telephony) 2 data 4 fax (facsimile services) (not supported by LTE)
Page 529 LE910Cx AT Commands Reference Guide 161 : National type of number and ISDN/Telephony numbering plan <class> integer See before <alpha> string Alphanumeric representation of <number> corresponding to the entry found in phonebook; used character set should be the one selected with +CSCS.
Page 530 LE910Cx AT Commands Reference Guide In the query command the class parameter must not be issued. The difference between call waiting report disabling (AT+CCWA = 0,1,7) and call waiting service disabling (AT+CCWA = 0,0,7) is that in the first case the call waiting indication is sent to the device by network but this last one does not report it to the modem;...
Page 531: At+Vzwrsrp - Read Rsrp Values
LE910Cx AT Commands Reference Guide 3.4.56. AT+VZWRSRP - Read RSRP Values Additional Verizon Wireless specific AT command used for certification tests. LTE AT commands for Test automation REQ_FEB2014 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT+VZWRSRP? Read command reports the RSRP info in the format: +VZWRSRP:<cellID1>,<EARFCN1>,<RSRP1>[,<cellID2>,<EARFCN2>,<RSRP2>[,...
Page 532: At+Vzwrsrq - Read Rsrq Values
LE910Cx AT Commands Reference Guide 3.4.57. AT+VZWRSRQ - Read RSRQ Values Additional Verizon Wireless specific AT command used for certification tests. LTE AT commands for Test automation REQ_FEB2014 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT+VZWRSRQ? Read command reports the RSRQ info in the format: +VZWRSRQ:<cellID1>,<EARFCN1>,<RSRQ1>[,<cellID2>,<EARFCN2>,<RSRQ2>[,...
Page 533: At+Cops - Operator Selection
LE910Cx AT Commands Reference Guide 3.4.58. AT+COPS - Operator Selection The command selects a network operator and registers the module. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT+COPS=[<mode>[,<format>[,<oper>[,<act>]]]] The set command attempts to select a network operator and registers the module on the just chosen operator;...
Page 534 LE910Cx AT Commands Reference Guide 5 : Unknown <format> integer specifies the operator name format, see <oper> parameter Values: 0 : alphanumeric long form (max length 16 digits) 1 : alphanumeric short form 2 : numeric 5 or 6 digits [country code (3) + network code (2 or 3)] <oper>...
Page 535 LE910Cx AT Commands Reference Guide 7 : E-UTRAN <mode> parameter setting is stored in NVM and available at next reboot. <mode>=3 is not saved. If <mode>=1 or 4, the selected network is stored in NVM too and is available at the next reboot (this will happen also after inserting another SIM).
Page 536 LE910Cx AT Commands Reference Guide AT+COPS=? Test command returns a list of quadruplets, each representing an operator present in the network. The quadruplets list is ended with the range values of the <mode> and <formats> parameters. The quadruplets in the list are closed between round brackets, separated by commas, the <oper>...
Page 537: At#Rejer - Network Reject Error Report
LE910Cx AT Commands Reference Guide 3.4.59. AT#REJER - Network Reject Error Report The command is related to a numeric error report that comes from the network. It is described the meaning of the <reject_cause> numeric value that comes from MM, GMM, and EMM. •...
Page 538 LE910Cx AT Commands Reference Guide <reject_cause> integer Indicates that <reject_cause> contains an MM/GMM/EMM cause value, see 3GPP TS 24.008 Annex G and TS 24.301 Annex A. <AcT> string Access Technology of the rejected network Values: : GSM/GSM Compact/EGPRS WCDMA : UTRAN/HSDPA/HSUPA : E-UTRAN AT#REJER? Read command returns the current value of <mode>, the reject cause...
Page 539: At#Ltesfn - Read Lte System And Subframe Number
LE910Cx AT Commands Reference Guide 3.4.60. AT#LTESFN - Read LTE system and subframe number This command can report the current LTE system frame number sub frame number. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#LTESFN[=[<sysFrameNumber>[,<subFrameNumber>]]] Read command reports the current LTE system frame number <sysFrameNumber>...
Page 540 LE910Cx AT Commands Reference Guide Read command operates as execution command. This command type needs for backward compatibility. AT#LTESFN=? Test command returns OK result code. AT#LTESFN=? AT#LTESFN #LTESFN: 263,3 AT#LTESFN? #LTESFN: 455,3 80502ST10950A Rev. 14 Page 540 of 1904 2022-03-04 Not Subject to NDA...
Page 541: At#Ciphind - Ciphering Indication
LE910Cx AT Commands Reference Guide 3.4.61. AT#CIPHIND - Ciphering Indication This command enables/disables unsolicited result code for cipher indication. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#CIPHIND=[<mode>] Set command enables/disables unsolicited result code for cipher indication.
Page 542 LE910Cx AT Commands Reference Guide Additional info: Here is the list of the parameters meaning returned by the read command. Name Type Default Description <cipher> integer shows cipher status Values: 0 : cipher off 1 : cipher on 2 : unknown (missing network information) <SIM/USIM integer SIM/USIM cipher status...
Page 543: At#Clsmk - Control Classmark2 Parameter
LE910Cx AT Commands Reference Guide 3.4.62. AT#CLSMK - Control Classmark2 parameter This command set command Classmark2 parameters used Uplink signal message. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#CLSMK=<idx>,<val> Set command Classmark2 parameters used Uplink signal message. Parameters: Name Type...
Page 544 LE910Cx AT Commands Reference Guide The values are depending on GSM support. After execution, module must be reset. Otherwise, a module doesn't work by changed value. When <idx> is 0, <val> has no effect. (dummy value) AT#CLSMK? Read command reports the <val> for each <idx>. AT#CLSMK=? Test command reports the ranges of the parameters <idx>...
Page 545: At#Crac - Control Radio Access Capability
LE910Cx AT Commands Reference Guide 3.4.63. AT#CRAC - Control Radio Access Capability This command set command the nv items for controlling Radio Access Capability. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#CRAC=<idx>,<val> Set command the nv items for controlling Radio Access Capability. Parameters: Name Type...
Page 546 LE910Cx AT Commands Reference Guide <val> integer value Values: 0 : Disable 1 : Enable The values are depending on GSM support. After execution, module must be reset. Otherwise, a module doesn't work by changed value. AT#CRAC? Read command reports the <val> for each <idx>. AT#CRAC=? Test command reports the ranges of the parameters <idx>...
Page 547: At#Rpmcfgext - Rpm Function Configuration
LE910Cx AT Commands Reference Guide 3.4.64. AT#RPMCFGEXT - RPM function configuration This command configures RPM (Radio Policy Management) function. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#RPMCFGEXT=<app_max_num_reset>,<app_reset_counter>,<app_reset_timer>, <app_reset_blk_leak_rate_timer>,<avg_reset_time>,<leak_rate_time>,<backoff_cn t_0>,<backoff_cnt_1>,<backoff_cnt_2>,<backoff_cnt_3>,<cpdp_cnt_0>,<cpdp_cnt_1 >,<cpdp_cnt_2>,<cpdp_cnt_3>,<lr3_timer> Set command sets the RPM configuration parameter. Parameters: Name Type...
Page 548 LE910Cx AT Commands Reference Guide Value: 0÷65535 : reset timer <app_reset_blk_leak_rate_timer> integer LR-1. Leak rate for C-BR-1 (Counter related to Value: 0÷65535 : leak rate timer <avg_reset_time> integer Average time before RPM resets modem following permanent MM/GMM/EMM reject Value: 0÷255 : reset time <leak_rate_time>...
Page 549 LE910Cx AT Commands Reference Guide 0÷255 : backoff_cnt_0 <backoff_cnt_1> integer Max number of PDP Activation Requests / PDN Connectivity Requests per Hour allowed by RPM following a "Permanent" PDP Activation Reject. Value: 0÷255 : backoff_cnt_1 <backoff_cnt_2> integer Max number of PDP Activation Requests / PDN Connectivity Requests per Hour...
Page 550 LE910Cx AT Commands Reference Guide <cpdp_cnt_0> integer CPDP-1 Value: 0÷255 : cpdp_cnt_0 <cpdp_cnt_1> integer CPDP-2 Value: 0÷255 : cpdp_cnt_1 <cpdp_cnt_2> integer CPDP-3 Value: 0÷255 : cpdp_cnt_2 <cpdp_cnt_3> integer CPDP-4 Value: 0÷255 : cpdp_cnt_3 <lr3_timer> integer LR-3. Leak Rate3 timer (hour). Leak rate for CPDP-1 to C-PDP-4 (Counter related to F1)
Page 551 LE910Cx AT Commands Reference Guide _1>,<backoff_cnt_2>,<backoff_cnt_3>,<cpdp_cnt_0>,<cpdp_cnt_1>,<cpdp_cnt_2>,<c pdp_cnt_3>,<lr3_timer> AT#RPMCFGEXT=? Test command returns OK result. 80502ST10950A Rev. 14 Page 551 of 1904 2022-03-04 Not Subject to NDA...
Page 552: At#Rpmcfg - Rpm Function Enable
LE910Cx AT Commands Reference Guide 3.4.65. AT#RPMCFG - RPM function enable This command enables/disables RPM (Radio Policy Management) function. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#RPMCFG=<rpm_ena> Set command enables/disable the RPM function. Parameter: Name Type Default...
Page 553: At#Ceernet - Extended Numeric Error Report For Network Reject Cause
LE910Cx AT Commands Reference Guide 3.4.66. AT#CEERNET - Extended Numeric Error Report for Network Reject Cause The command is related to extended numeric error report. 3GPP TS 24.008 3GPP TS 24.301 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT#CEERNET...
Page 554 LE910Cx AT Commands Reference Guide : SM unknown cause : IMSI unknown in HLR : illegal MS : IMSI unknown in VISITOR LR : IMEI not accepted : illegal ME : GPRS not allowed : Operator determined barring (SM cause failure)/ GPRS and not GPRS not allowed (GMM cause failure) : MS identity cannot be derived by network...
Page 555 LE910Cx AT Commands Reference Guide : MBMS bearer capabilities insufficient for the service : LLC or SNDCP failure : insufficient resources : missing or unknown APN : unknown PDP address or PDP type : user authentication failed : activation rejected by GGSN : activation rejected unspecified : service option not supported : req.
Page 556 LE910Cx AT Commands Reference Guide : syntactical err in PKT filter : PDP context without TFT activated : multicast group membership timeout : retry on new cell begin (if MM cause failure) / activation rejected BCM violation (if SM cause failure) : PDP type IPV4 only allowed : PDP type IPV6 only allowed : single address bearers only allowed...
Page 557 LE910Cx AT Commands Reference Guide The <code> 1 cannot be used in ota. Detach request reject cause from the network also be reported. AT#CEERNET=? Test command returns OK result code. 80502ST10950A Rev. 14 Page 557 of 1904 2022-03-04 Not Subject to NDA...
Page 558: At#Bndram - Select Band Without Storing Nvm
LE910Cx AT Commands Reference Guide 3.4.67. AT#BNDRAM - Select Band without storing NVM This command selects RF bands without storing NVM SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#BNDRAM=[<band>[,<UMTS_band>[,<LTE_band>[,<TDSCDMA_band>]]]] Set command selects the current GSM, UMTS, LTE, and TDSCDMA bands without storing NV Parameters: Name...
Page 559 LE910Cx AT Commands Reference Guide : B2 (1900 MHz) : B5 (850 MHz) : B1 (2100 MHz) + B2 (1900 MHz) + B5 (850 MHz) : B2 (1900 MHz) + B5 (850 MHz) : B8 (900 MHz) : B1 (2100 MHz) + B8 (900 MHz) : B4 (1700 MHz) : B1 (2100 MHz) + B5 (850 MHz) : B1 (2100 MHz) + B8 (900 MHz) + B5 (850...
Page 560 LE910Cx AT Commands Reference Guide 20 : B5 (850 MHz) + B6 (800 MHz) 21 : B2 (1900 MHz) + B5 (850 MHz) + B6 (800 MHz) 22 : B1 (2100 MHz) + B3 (1800 MHz) + B5 (850 MHz) + B8 (900 MHz) 23 : B1 (2100 MHz) + B3 (1800 MHz) 24 : B1 (2100 MHz) + B2 (1900 MHz) + B4 (1700 MHz) + B5 (850 MHz)
Page 561 LE910Cx AT Commands Reference Guide 0x02000 : EUTRAN BAND14 0x10000 : EUTRAN BAND17 0x80000 : EUTRAN BAND20 0x1000000 : EUTRAN BAND25 0x2000000 : EUTRAN BAND26 0x8000000 : EUTRAN BAND28 0x00200000000 : EUTRAN BAND34 0x02000000000 : EUTRAN BAND38 0x04000000000 : EUTRAN BAND39 0x08000000000 : EUTRAN BAND40 0x10000000000...
Page 562 LE910Cx AT Commands Reference Guide FFFFFFFFFFFFFFFF - LTE/TDSCDMA invalid value for all models In set command LTE/TDSCDMA band mask should be entered in HEX format without "0x". In Read and test commands it also appears without "0x". In set command, "NULL" input value is acceptable except last input parameter.
Page 563 LE910Cx AT Commands Reference Guide AT#BNDRAM=? #BNDRAM: (0-5),(0,5,6,13,15),(800C5) 800C5 LTE bit mask means all combinations of next bands could be accepted by SET command: 0x00000 No bands allowed 0x00001 EUTRAN BAND1 0x00004 EUTRAN BAND3 0x00040 EUTRAN BAND7 0x00080 EUTRAN BAND8 0x80000 EUTRAN BAND20 80502ST10950A Rev.
Page 564: At#Ratorder - Set Rat Acquisition Order
LE910Cx AT Commands Reference Guide 3.4.68. AT#RATORDER - Set RAT acquisition order The command sets the Radio Access Technology (RAT) acquisition order. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#RATORDER=<RAT1>,<RAT2>,<RAT3> Set command allows to configure the Radio Access Technology (RAT) acquisition order when more technologies (2G/3G/LTE) are available.
Page 565 LE910Cx AT Commands Reference Guide 9 : LTE The setting is saved in NVM and available at next reboot. AT#RATORDER? Read command reports the current parameters values. AT#RATORDER=? Test command returns the supported values of parameters <RAT1>, <RAT2> and <RAT3>. 80502ST10950A Rev.
Page 566: Phonebook
LE910Cx AT Commands Reference Guide Phonebook 3.5.1. AT+CPBS - Select Phonebook Memory Storage This command selects phonebook memory storage, which is used by other phonebook commands. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Specific profile AT+CPBS=<storage>[,<password>] Set command selects phonebook memory storage, which is used by other...
Page 567 LE910Cx AT Commands Reference Guide "RC" : ME received calls list (+CPBF is not applicable for this storage) "MB" : mailbox numbers stored on SIM; it is possible to select this storage only if the mailbox service is provided by the SIM (see #MBN) "DC"...
Page 568 LE910Cx AT Commands Reference Guide Read command returns currently selected memory, number of used locations and total number of locations in the memory, in the format: +CPBS: <storage>,<used>,<total> For <storage>="MC": if there are more than one missed call from the same number the read command will return only the last call. AT+CPBS=? Test command returns the supported range of values for the parameter <storage>.
Page 569: At+Cpbr - Read Phonebook Entries
LE910Cx AT Commands Reference Guide 3.5.2. AT+CPBR - Read Phonebook Entries The command reads phonebook entries. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CPBR=<index1>[,<index2>] Execution command returns phonebook entries in location number range <index1>...<index2>...
Page 570 LE910Cx AT Commands Reference Guide response parameters Name Type Default Description <indexn> integer the location numbers of phonebook memory <number> string phone number of format <type> <type> integer type of address octet Values: 129 : national numbering scheme 145 : international numbering scheme (contains the character "+") <text>...
Page 571 LE910Cx AT Commands Reference Guide <secondtext> string second text field associated with the number; character set as specified by command select TE character set +CSCS <email> string email field; character set as specified by command select TE character set +CSCS If "MC"...
Page 572 LE910Cx AT Commands Reference Guide <maxIndex> integer the maximum <index> number <nlength> integer the maximum length of field <number> <tlength> integer the maximum length of field <text> <glength> integer the maximum length of field <group> <slength> integer the maximum length of field <secondtext>...
Page 573 LE910Cx AT Commands Reference Guide AT+CPBS="ME" AT+CPBS? +CPBS: "ME",1,100 AT+CPBR=? +CPBR: (1-100),40,255 AT+CPBR=1 +CPBR: 1,"01048771234",129,"James" 80502ST10950A Rev. 14 Page 573 of 1904 2022-03-04 Not Subject to NDA...
Page 574: At+Cpbf - Find Phonebook Entries
LE910Cx AT Commands Reference Guide 3.5.3. AT+CPBF - Find Phonebook Entries This command search phonebook record from the current phonebook memory storage selected with +CPBS. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Other AT+CPBF=<findtext>...
Page 575 LE910Cx AT Commands Reference Guide <indexn> integer the location number of the phonebook entry <number> string phone number of format <type> <type> integer type of address octet Values: 129 : national numbering scheme 145 : international numbering scheme (contains the character "+") <text>...
Page 576 LE910Cx AT Commands Reference Guide +CPBF is not applicable if the current selected storage (see +CPBS) is either "MC", "RC" or "LD". If <findtext>="", the command returns all the phonebook records. If no PB records satisfy the search criteria, then an ERROR message is reported.
Page 577 LE910Cx AT Commands Reference Guide The value of <nlength> could vary, depending on the availability of Extension service, in the following situations: if "SM" memory storage has been selected (see +CPBS) and the SIM supports the Extension1 service if "FD" memory storage has been selected (see +CPBS) and the SIM supports the Extension2 service if "MB"...
Page 578 LE910Cx AT Commands Reference Guide 80502ST10950A Rev. 14 Page 578 of 1904 2022-03-04 Not Subject to NDA...
Page 579: At+Cpbw - Write Phonebook Entry
LE910Cx AT Commands Reference Guide 3.5.4. AT+CPBW - Write Phonebook Entry This command writes phonebook entry in the current phonebook memory. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Other AT+CPBW=[<index>][,<number>[,<type>[,<text>[,<group>[,<adnumber>[,<adtype> [,<secondtext>[,<email>[,<hidden>]]]]]]]]] Execution command writes phonebook entry in location number <index> in the current phonebook memory storage selected with +CPBS.
Page 580 LE910Cx AT Commands Reference Guide command select TE character set +CSCS <adnumber> string an additional number of format <adtype> <adtype> integer type of address octet <secondtext> string a second text field associated with the number; character set as specified by command select TE character set +CSCS <email>...
Page 581 LE910Cx AT Commands Reference Guide overwrite with it one of the old predefined strings, using #CPBGW command. AT+CPBW=? Test command returns location range supported by the current storage and types of address as compound values, the maximum length of <number> field, supported number formats of the storage, the maximum length of <text>...
Page 582 LE910Cx AT Commands Reference Guide the value of <nlength> could vary, depending on the availability of Extension service, in the following situations: if "SM" memory storage has been selected (see +CPBS) and the SIM supports the Extension1 service if "FD" memory storage has been selected (see +CPBS) and the SIM supports the Extension2 service if "MB"...
Page 583: At#Cpbgr - Read Group Entries
LE910Cx AT Commands Reference Guide 3.5.5. AT#CPBGR - Read Group Entries This command returns Grouping information Alpha String (GAS) USIM file entries. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT#CPBGR=<indexFirst>[,<indexLast>] Set command returns Grouping information Alpha String (GAS) USIM file entries in location number range <indexFirst>...<indexLast>.
Page 584 LE910Cx AT Commands Reference Guide minIndex÷maxIndex : range of location numbers of GAS, where "minIndex" and "maxIndex" can be obtained by issuing the test command Additional info: Response parameters: Name Type Default Description <index> integer location number of the GAS entry Value: indexFirst÷indexLast : range of location numbers...
Page 585 LE910Cx AT Commands Reference Guide <maxIndex> integer maximum <index> number <tlength> integer maximum <text> field length 80502ST10950A Rev. 14 Page 585 of 1904 2022-03-04 Not Subject to NDA...
Page 586: At#Cpbgw - Write Group Entry
LE910Cx AT Commands Reference Guide 3.5.6. AT#CPBGW - Write Group Entry Set command writes the name of a phonebook group <text> in the Grouping information Alpha String (GAS) USIM file in a specified location number <index>. SIM Presence Setting saved Can be aborted MAX timeout SELINT...
Page 587 LE910Cx AT Commands Reference Guide Name Type Default Description <tlength> integer maximum length of field <text> in bytes; actual maximum number of characters that can be stored depends upon <text> coding (see +CSCS) 80502ST10950A Rev. 14 Page 587 of 1904 2022-03-04 Not Subject to NDA...
Page 588: At#Cpbd - Delete All Phonebook Entries
LE910Cx AT Commands Reference Guide 3.5.7. AT#CPBD - Delete All Phonebook Entries This command deletes all phonebook entries. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT#CPBD Execution command deletes all phonebook entries in the current phonebook memory storage selected with +CPBS.
Page 589: At#Cpbe - Emergency Numbers Programming
LE910Cx AT Commands Reference Guide 3.5.8. AT#CPBE - Emergency Numbers Programming This command is used to write the emergency number to "EN" phonebook for carrier certification. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT#CPBE=<index>[,<number>] Set command writes the emergency number to "EN" phonebook. Parameters: Name Type...
Page 590 LE910Cx AT Commands Reference Guide AT+CPBR=1,117 +CPBR: 78,"911",129,"",,"","",,"","" +CPBR: 79,"112",129,"",,"","",,"","" +CPBR: 80,"*911",129,"",,"","",,"","" +CPBR: 81,"#911",129,"",,"","",,"","" +CPBR: 82,"*272911",129,"",,"","",,"","" AT#CPBE=1,"999" AT+CPBR=1,117 +CPBR: 68,"999",129,"",,"","",,"","" +CPBR: 78,"911",129,"",,"","",,"","" +CPBR: 79,"112",129,"",,"","",,"","" +CPBR: 80,"*911",129,"",,"","",,"","" +CPBR: 81,"#911",129,"",,"","",,"","" +CPBR: 82,"*272911",129,"",,"","",,"","" 80502ST10950A Rev. 14 Page 590 of 1904 2022-03-04 Not Subject to NDA...
Page 591: Sms & Cb
LE910Cx AT Commands Reference Guide SMS & CB 3.6.1. AT+CSMS - Select Message Service This command selects messaging service type. 3GPP TS 27.005 3GPP TS 23.040 3GPP TS 23.041 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT+CSMS=<service>...
Page 592 LE910Cx AT Commands Reference Guide 1 : 3GPP TS 23.040 and 3GPP TS 23.041. The syntax of SMS AT commands is compatible with 3GPP TS 27.005. The requirement of <service> setting 1 is mentioned under corresponding command descriptions Additional info: Parameters meaning of the returned message.
Page 593 LE910Cx AT Commands Reference Guide AT+CSMS? Read command reports current service setting along with supported message types in the format: +CSMS: <service>, <mt>, <mo>, <bm> AT+CSMS=? Test command reports the supported value of the parameter <service>. 80502ST10950A Rev. 14 Page 593 of 1904 2022-03-04 Not Subject to NDA...
Page 594: At+Cpms - Preferred Message Storage
LE910Cx AT Commands Reference Guide 3.6.2. AT+CPMS - Preferred Message Storage The command selects the memory storage used by SMs (Short Messages). 3GPP TS 27.005 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT+CPMS=<memr>[,<memw>[,<mems>]] Set command selects memory storages <memr>, <memw> and <mems> to be used for reading, writing, sending and storing SMs The command returns the memory storage status in the format: +CPMS: <usedr>,<totalr>,<usedw>,<totalw>,<useds>,<totals>...
Page 595 LE910Cx AT Commands Reference Guide <memw> string memory to which writing and sending operations are made Values: ME : SMS memory storage in Flash SM : SIM SMS memory storage <mems> string memory to which received SMs are preferred to be stored Values: ME : SMS memory storage in Flash SM : SIM SMS memory storage...
Page 596 LE910Cx AT Commands Reference Guide "SR" non-volatile memory is cleared when another SIM card is inserted. It is kept, even after a reset, while the same SIM card is inserted. AT+CPMS? Read command reports the message storage status. +CPMS:<memr>,<usedr>,<totalr>,<memw>,<usedw>,<totalw>,<mems>, <useds>,<totals> The parameters are described in previous sections.
Page 597: At+Cmgf - Message Format
LE910Cx AT Commands Reference Guide 3.6.3. AT+CMGF - Message Format Selects the format of SMS messages to be used in following SMS commands. 3GPP TS 27.005 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Specific profile AT+CMGF=[<mode>] Set command selects the format of SMS messages used with send, list, read and write commands.
Page 598 LE910Cx AT Commands Reference Guide 80502ST10950A Rev. 14 Page 598 of 1904 2022-03-04 Not Subject to NDA...
Page 599: At+Csca - Service Center Address
LE910Cx AT Commands Reference Guide 3.6.4. AT+CSCA - Service Center Address This command allows to set the Service Center Address for SMS transmissions. 3GPP TS 27.005 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Other AT+CSCA=<number>[,<type>] Set command sets the Service Center Address to be used for mobile originated SMS transmissions Parameters: Name...
Page 600 LE910Cx AT Commands Reference Guide +CSCA: <number>,<type> If SCA is not present the device reports an error message. AT+CSCA=? Test command returns the OK result code. To use the SM service, is mandatory to set a Service Center Address at which service requests will be directed. In Text mode, this setting is used by send and write commands;...
Page 601: At+Csmp - Set Text Mode Parameters
LE910Cx AT Commands Reference Guide 3.6.5. AT+CSMP - Set Text Mode Parameters This command is used to select values for additional parameters for storing and sending SMS when the text mode is used (AT+CMGF=1). 3GPP TS 23.40 3GPP TS 23.038 SIM Presence Setting saved Can be aborted...
Page 602 LE910Cx AT Commands Reference Guide Format Validity Period not present Validity Period present, enhanced format Validity Period present, relative format Validity Period present, absolute format Value: 0÷255 : range for Validity Period in relative format <pid> integer TP-Protocol-Identifier, as described in 3GPP TS 23.40 Value: 0÷255 : described in 3GPP TS 23.40...
Page 603 LE910Cx AT Commands Reference Guide relative format <vp> is stored only as integer type, i.e. only in its <vp>, <pid> and <dcs> default values are loaded from first SIM SMS Parameters profile, if present. If it is not present, then the default values are those above indicated.
Page 604 LE910Cx AT Commands Reference Guide • Set the parameters for an outgoing message with 24 hours of validity period and default properties: AT+CSMP=17,167,0,0 Set the parameters for an outgoing message with validity period in enhanced format: the <vp> string actually codes 24 hours of validity period.
Page 605: At+Csdh - Show Text Mode Parameters
LE910Cx AT Commands Reference Guide 3.6.6. AT+CSDH - Show Text Mode Parameters This command controls whether detailed header information is shown in text mode. 3GPP TS 27.005 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Specific profile AT+CSDH=[<show>] Set command controls whether detailed header information is shown in text mode (AT+CMGF=1) result codes.
Page 606 LE910Cx AT Commands Reference Guide AT+CSDH? Read command reports the current setting in the format: +CSDH: <show> AT+CSDH=? Test command reports the supported range of values for parameter <show>. 80502ST10950A Rev. 14 Page 606 of 1904 2022-03-04 Not Subject to NDA...
Page 607: At+Cscb - Select Cell Broadcast
LE910Cx AT Commands Reference Guide 3.6.7. AT+CSCB - Select Cell Broadcast The command selects which types of Cell Broadcast Messages are to be received by the device. 3GPP TS 27.005 3GPP TS 23.041 3GPP TS 23.038 SIM Presence Setting saved Can be aborted MAX timeout SELINT...
Page 608 LE910Cx AT Commands Reference Guide The current settings are stored also by +CSAS command AT+CSCB? Read command reports the current value of parameters <mode>, <mids> and <dcss>. AT+CSCB=? Test command returns the range of values for parameter <mode>. Select a range AT+CSCB=0,"0,1,300-315,450","0-3"...
Page 609: At+Csas - Save Settings
LE910Cx AT Commands Reference Guide 3.6.8. AT+CSAS - Save Settings Execution command saves settings which have been made by the +CSCA, +CSMP and +CSCB commands in local non-volatile memory. 3GPP TS 27.005 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CSAS=<profile>...
Page 610 LE910Cx AT Commands Reference Guide Test command returns the possible range of values for the parameter <profile>. 80502ST10950A Rev. 14 Page 610 of 1904 2022-03-04 Not Subject to NDA...
Page 611: At+Cres - Restore Settings
LE910Cx AT Commands Reference Guide 3.6.9. AT+CRES - Restore Settings Execution command restores message service settings saved by +CSAS command from either NVM or SIM. 3GPP TS 27.005 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT+CRES[=<profile>] Parameter: Name...
Page 612 LE910Cx AT Commands Reference Guide AT+CRES=? Test command returns the possible range of values for the parameter <profile>. 80502ST10950A Rev. 14 Page 612 of 1904 2022-03-04 Not Subject to NDA...
Page 613: At+Cmms - More Message To Send
LE910Cx AT Commands Reference Guide 3.6.10. AT+CMMS - More Message to Send Set command controls the continuity of SMS relay protocol link. When feature is enabled (and supported by network) multiple messages can be sent much faster as link is kept open.
Page 614 LE910Cx AT Commands Reference Guide Entering AT+CMMS= returns OK but has no effect. AT+CMMS? Read command reports the current value of the parameter <n> in the format: +CMMS: <n> AT+CMMS=? Test command returns the range of supported <n>. 80502ST10950A Rev. 14 Page 614 of 1904 2022-03-04 Not Subject to NDA...
Page 615: At+Cgsms - Select Service For Mo Sms Messages
LE910Cx AT Commands Reference Guide 3.6.11. AT+CGSMS - Select Service for MO SMS Messages Set command is used to specify the service or service preference that the MT will use to send MO SMS messages. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout...
Page 616 LE910Cx AT Commands Reference Guide AT+CGSMS? The read command returns the currently selected service or service preference in the format: +CGSMS: <service> AT+CGSMS=? Test command reports the supported list of currently available <service>. 80502ST10950A Rev. 14 Page 616 of 1904 2022-03-04 Not Subject to NDA...
Page 617: At+Cnmi - New Message Indications To Terminal Equipment
LE910Cx AT Commands Reference Guide 3.6.12. AT+CNMI - New Message Indications to Terminal Equipment This command sets the parameters for receiving SMS messages. 3GPP TS 27.005 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT+CNMI=[<mode>[,<mt>[,<bm>[,<ds>[,<bfr>]]]]] Set command selects the behavior of the device on how the receiving of new messages from the network is indicated to the DTE.
Page 618 LE910Cx AT Commands Reference Guide <mt> integer result code indication reporting for SMS- DELIVER. Values: 0 : No SMS-DELIVER indications are routed to the TE and message is stored. 1 : If SMS-DELIVER is stored into ME/TA, indication of the memory location is routed to the TE using the URC described in Additional info section.
Page 619 LE910Cx AT Commands Reference Guide 2 : if a status report is stored, then the unsolicited result code, described in Additional info section, is sent. <bfr> integer buffered result codes handling method Values: 0 : TA buffer of unsolicited result codes defined within this command is flushed to the TE when <mode>=1..3 is entered (OK response shall be given before flushing the codes)
Page 620 LE910Cx AT Commands Reference Guide Class 2 messages and messages in the message waiting indication group (stored message) result in indication as defined in <mt>=1. Acknowledge for the received SMS-DELIVER SM is sent to network immediately when +CSMS <service> is set to '0' or when +CSMS <service> is set to '1', acknowledge is sent via +CNMA command during predefine time-out, an error is sent to network in case timeout expire, next +CMT response is depend on acknowledge of current received +CMT response in case +CSMS <service>...
Page 621 LE910Cx AT Commands Reference Guide on acknowledge of current received +CDS response in case +CSMS <service> parameter set to '1'. <ds>=2: +CDSI: <mems>,<index> Unsolicited fields: Name Type Description <mems> string memory storage where the new message is stored: "SM", "ME". <index>...
Page 622 LE910Cx AT Commands Reference Guide <pid> string Protocol Identifier <dcs> string Data Coding Scheme <sca> string Service Centre address, string type, converted in the currently selected character set (see +CSCS) <tosca> integer type of number <sca>: 129 - number in national format 145 - number in international format (contains the "+") <length>...
Page 623 LE910Cx AT Commands Reference Guide * If <dcs> indicates that GSM 03.38 default alphabet is used, each character of GSM alphabet will be converted into current TE character set (see +CSCS) * If <dcs> indicates that 8-bit or UCS2 data coding scheme is used, each 8-bit octet will be converted into two IRA character long hexadecimal number (e.g.
Page 624 LE910Cx AT Commands Reference Guide +CNMI: <mode>,<mt>,<bm>,<ds>,<bfr> AT+CNMI=? Test command reports the supported range of values for the +CNMI command parameters AT+CMGF=1 AT+CNMI=1,2,0,1,0 Received message from network +CMT: "+821020955219",,"07/07/26,20:09:07+36" TEST MESSAGE 80502ST10950A Rev. 14 Page 624 of 1904 2022-03-04 Not Subject to NDA...
Page 625: At+Cmgl - List Messages
LE910Cx AT Commands Reference Guide 3.6.13. AT+CMGL - List Messages This command is used to list the messages. 3GPP TS 27.005 3GPP TS 23.040 3GPP TS 23.038 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CMGL[=<stat>] Execution command reports the list of all the messages with status value <stat>...
Page 626 LE910Cx AT Commands Reference Guide <stat> integer status value Values: 0 : new message 1 : read message 2 : stored message not sent yet 3 : stored message already sent 4 : all messages In case of PDU mode the representation format (see +CMGF) is: +CMGL: <index>,<stat>,<alpha>,<length><CR><LF><pdu>[<CR><LF>...
Page 627 LE910Cx AT Commands Reference Guide Name Type Default Description <stat> string status value Values: "REC : new message UNREAD" "REC READ" : read message "STO UNSENT" : stored message not sent yet "STO SENT" : stored message already sent "ALL" : all messages In case of TEXT mode, the representation format for stored messages (either sent or unsent) or received messages (either read or unread, not...
Page 628 LE910Cx AT Commands Reference Guide <oa/da> string originator/destination address, represented in the currently selected character set (see +CSCS). <alpha> string The alphanumeric representation of <da> or <oa>, corresponding to an entry found in the phonebook; used character set is the one selected with command +CSCS.
Page 629 LE910Cx AT Commands Reference Guide converted into two IRA character long hexadecimal number. The <length> indicates text length in characters without UDH length. In case of TEXT mode, the representation format for delivery confirm messages is: +CMGL: <index>,<stat>,<fo>,<mr>,<ra>,<tora>,<scts>,<dt>,<st>[<CR><LF> +CMGL: <index>,<stat>,<fo>,<mr>,<ra>,<tora>,<scts>,<dt>,<st>[...]] Name Type Default...
Page 630 LE910Cx AT Commands Reference Guide If parameter is omitted the command returns the list of SMS with "REC UNREAD" status. The order in which the messages are reported by +CMGL corresponds to their position in the memory storage. AT+CMGL=? Test command returns a list of supported <stat>s. 80502ST10950A Rev.
Page 631: At+Cmgr - Read Message
LE910Cx AT Commands Reference Guide 3.6.14. AT+CMGR - Read Message This command is used to read a message. 3GPP TS 27.005 3GPP TS 23.040 3GPP TS 23.038 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CMGR=<index> Execution command reports the message with location value <index> from <memr>...
Page 632 LE910Cx AT Commands Reference Guide Name Type Default Description <stat> integer status of the message Values: 0 : new message 1 : read message 2 : stored message not yet sent 3 : stored message already sent <alpha> string string type alphanumeric representation of <da>...
Page 633 LE910Cx AT Commands Reference Guide In case of Text mode, if there is a Message Delivery Confirm message in location <index> the output format is: +CMGR: <stat>,<fo>,<mr>,<ra>,<tora>,<scts>,<dt>,<st> Name Type Default Description <stat> string status of the message Values: "REC : new received message UNREAD"...
Page 634 LE910Cx AT Commands Reference Guide <vp> mixed Validity Period; its format depends on SMS-SUBMIT <fo> setting (see +CPMS): Not present: if <fo> tells that Validity Period Format is not present Integer: if <fo> tells that Validity Period Format is relative Quoted time-string type: if <fo>...
Page 635 LE910Cx AT Commands Reference Guide <toda> integer type of number of <da> For Verizon FW, the range of <toda> is 0 - 255. Values: 129 : number in national format 145 : number in international format (contains the "+") <tosca> integer type of number of <sca>...
Page 636 LE910Cx AT Commands Reference Guide Both in PDU and Text Mode, if status of the message was 'received unread' before reading, then status in the storage changes to 'received read' AT+CMGR=? Test command returns the OK result code 80502ST10950A Rev. 14 Page 636 of 1904 2022-03-04 Not Subject to NDA...
Page 637: At+Cnma - New Message Acknowledgement
LE910Cx AT Commands Reference Guide 3.6.15. AT+CNMA - New Message Acknowledgement This command is used to confirm the correct reception of a new message. 3GPP TS 27.005 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT+CNMA Execution command confirms correct reception of a new message (SMS- DELIVER or SMS-STATUS-REPORT) which is routed directly to the TE.
Page 638 LE910Cx AT Commands Reference Guide AT+CNMA[=<n>[,<length>[<CR>PDU is given<ctrl-Z/ESC>]]] Either positive (RP-ACK) or negative (RP-ERROR) acknowledgement to the network is possible. Parameter <n> defines which one will be sent. Optionally (when <length> is greater than zero) an acknowledgement TPDU (SMS-DELIVER- REPORT for RP-ACK or RP-ERROR) may be sent to the network. The entering of PDU is done similarly as specified in command Send Message +CMGS, except that the SMSC address field is not present.
Page 639 LE910Cx AT Commands Reference Guide Additional info: PDU Mode Test command returns the possible range of values for the parameter <n>. Text Mode Test command returns the OK result code. In case that a directly routed message must be buffered in ME/TA (possible when +CNMI parameter <mode>...
Page 640 LE910Cx AT Commands Reference Guide • PDU Mode AT+CSMS=1 +CSMS: 1,1,1 Set PDU mode. AT+CMGF=0 AT+CNMI=2,2,0,0,0 Message is received from network. +CMT: "",70 06816000585426000480980600F170110370537284... Send positive acknowledgement to the network. AT+CNMA=0 Message is received from network. +CMT: "",70 06816000585426000480980600F170110370537284... Send negative acknowledgment (Unspecified error) to the network. AT+CNMA=2,3<CR>...
Page 641 LE910Cx AT Commands Reference Guide Message is received from network. +CMT: "+821020955219",,"07/07/26,20:09:07+36" TEST MESSAGE Send positive acknowledgement to the network. AT+CNMA 80502ST10950A Rev. 14 Page 641 of 1904 2022-03-04 Not Subject to NDA...
Page 642: At+Cmgs - Send Short Message
LE910Cx AT Commands Reference Guide 3.6.16. AT+CMGS - Send Short Message The command is related to sending short messages. 3GPP TS 27.005 3GPP TS 23.040 3GPP TS 23.038 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT+CMGS Execution command sends a short message to the network.
Page 643 LE910Cx AT Commands Reference Guide To send the message issue Ctrl-Z char (0x1A hex). To exit without sending the message issue ESC char (0x1B hex). Name Type Default Description <length> integer length in bytes of the PDU to be sent (excluding the SMSC address octets) Value: 7÷164 : number of bytes...
Page 644 LE910Cx AT Commands Reference Guide - if current <dcs> (see +CSMP) indicates that 8-bit or UCS2 data coding scheme is used or current <fo> (see +CSMP) indicates that 3GPP TS 23.040 TP-User-Data-Header-Indication is set, the entered text should consist of two IRA character long hexadecimal numbers which ME/TA converts into 8-bit octet (e.g.
Page 645 LE910Cx AT Commands Reference Guide The DCD signal shall be in ON state while data is entered. The echoing of data is controlled by echo command E. In PDU mode: when the length of the SMSC address equals 0, then the SMSC address set with command +CSCA is used; in this case the SMSC Type of Address octet shall not be present in the data.
Page 646 LE910Cx AT Commands Reference Guide Set PDU mode AT+CMGF=0 AT+CMGS=18 > 088128010099010259115507811020905512F90000A704F4F29C0E +CMGS: 124 Set text mode AT+CMGF=1 AT+CSMP=17,167,0,0 AT+CMGS="01090255219",129 >TEST MESSAGE +CMGS:125 80502ST10950A Rev. 14 Page 646 of 1904 2022-03-04 Not Subject to NDA...
Page 647: At+Cmgc - Send Sms Command
LE910Cx AT Commands Reference Guide 3.6.17. AT+CMGC - Send SMS Command The command is related to sending SMS command. 3GPP TS 27.005 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CMGC Execution command sends command message from a TE to the network (SMS-COMMAND).
Page 648 LE910Cx AT Commands Reference Guide <CR><LF><greater_than><space> (IRA 13, 10, 62, 32) and waits for the specified number of bytes. the PDU shall be hexadecimal format (each octet of the PDU is given as two IRA character long hexadecimal number) and given in one line. To send the message issue Ctrl-Z char (0x1A hex).
Page 649 LE910Cx AT Commands Reference Guide TP-Status- Parameter Report- indicating if a Request status report is requested by the MS 0 A status report is not requested 1 A status report is requested TP-User- Parameter Data- indicating Header- whether the Indicator beginning of the User Data field contains a...
Page 650 LE910Cx AT Commands Reference Guide <TP-MN> Message Number 1 BYTE <TP-DA> Destination address formatted 2-12 according to the formatting rules of BYTES address fields. <TP-CDL> Command data length 1 BYTE <TP-CD> Command data 0-156 BYTES In Text mode, the +CMGC command has the following syntax: AT+CMGC=<fo>,<ct>[, <pid>[,<mn>[, <da>[,<toda>]]]] After command line is terminated with <CR>, the module responds sending a four-character sequence prompt:...
Page 651 LE910Cx AT Commands Reference Guide <mn> integer TP-Message-Number in integer format. <da> string TP-Destination-Address-Value field in string format represented in the currently selected character set (see +CSCS). <toda> integer TP-Destination-Address Type-of- Address octet: Values: 129 : number in national format 145 : number in international format (contains the "+") Unsolicited fields:...
Page 652 LE910Cx AT Commands Reference Guide To ensure that during the command execution, which may take several seconds, no other SIM interacting commands issued, care must take. If message sending fails for some reason, then an error code is reported. AT+CMGC=? Test command returns the OK result code.
Page 653 LE910Cx AT Commands Reference Guide Set PDU mode AT+CMGF=0 AT+CMGC=15 > 07917952140230f202440002340C917952446585600100 +CMGC: 124 Set text mode AT+CMGF=1 AT+CSMP=17,167,0,0 AT+CMGS="01090255219",129 > Text Message is entered <CTRL-Z> +CMGS:125 AT+CMGC=2,1,0,125 > Text Message is entered <CTRL-Z> 80502ST10950A Rev. 14 Page 653 of 1904 2022-03-04 Not Subject to NDA...
Page 654: At+Cmss - Send Message From Storage
LE910Cx AT Commands Reference Guide 3.6.18. AT+CMSS - Send Message from Storage This command sends to the network a message which is already stored in the <memw> storage. 3GPP TS 27.005 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CMSS=<index>[,<da>[,<toda>]]...
Page 655 LE910Cx AT Commands Reference Guide If message is successfully sent to the network, then the result is sent in the format: +CMSS: <mr> Name Type Default Description <mr> integer message reference number If message sending fails for some reason, an error code is reported: +CMS ERROR:<err>...
Page 656: At+Cmgw - Write Short Message To Memory
LE910Cx AT Commands Reference Guide 3.6.19. AT+CMGW - Write Short Message to Memory The command is related to writing short messages. 3GPP TS 27.005 3GPP TS 23.040 3GPP TS 23.038 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT+CMGW...
Page 657 LE910Cx AT Commands Reference Guide To write the message issue Ctrl-Z char (0x1A hex). To exit without sending the message issue ESC char (0x1B hex). Name Type Default Description <length> integer length in bytes of the PDU to be written Value: 7÷164 : number of bytes <stat>...
Page 658 LE910Cx AT Commands Reference Guide <CR><LF><greater_than><space> (IRA 13, 10, 62, 32) After this prompt, you can enter text that should be formatted as follows: - if current <dcs> (see +CSMP) indicates that GSM03.38/23.038 default alphabet is used and current <fo> (see +CSMP) indicates that 3GPP TS 03.40/23.040 TP-User-Data-Header-Indication is not set, then ME/TA converts the entered text into GSM alphabet, according to 3GPP TS 27.005, Annex A;...
Page 659 LE910Cx AT Commands Reference Guide Values: 129 : number in national format 145 : number in international format (contains the character "+") <stat> string "STO message status UNSENT" Values: "REC : new received message unread UNREAD" "REC READ" : received message read "STO UNSENT"...
Page 660 LE910Cx AT Commands Reference Guide Care must be taken to ensure that during the command execution, which may take several seconds, no other SIM interacting commands are issued. It is possible to save a concatenation of at most 16 SMs; the maximum number of chars depends on <dcs>: - 2432 chars - 2128 chars if 8-bit is used...
Page 661 LE910Cx AT Commands Reference Guide set PDU mode AT+CMGF=0 AT+CMGW=18 > 088128010099010259115507811020905512F90000A704F4F29C0E +CMGW: 29 set text mode AT+CMGF=1 AT+CSMP=17,167,0,0 AT+CSCA="821029190903",145 AT+CMGW="0165872928" > test message... +CMGW: 28 80502ST10950A Rev. 14 Page 661 of 1904 2022-03-04 Not Subject to NDA...
Page 662: At+Cmgd - Delete Message
LE910Cx AT Commands Reference Guide 3.6.20. AT+CMGD - Delete Message This command allows to delete from memory messages. 3GPP TS 27.005 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CMGD=<index>[,<delflag>] Execution command deletes SMS message(s) from a selected memory storage.
Page 663 LE910Cx AT Commands Reference Guide 3 : delete all read messages from selected storage, sent and unsent mobile originated messages, leaving unread messages untouched 4 : delete all messages from selected storage. If <delflag> is present and not set to 0 then, if <index> is greater than 0, <index>...
Page 664: At#Smsmode - Sms Commands Operation Mode
LE910Cx AT Commands Reference Guide 3.6.21. AT#SMSMODE - SMS Commands Operation Mode SMS Commands Operation Mode. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#SMSMODE=<mode> Set command enables/disables the check for presence of SMS Service Centre Address (SCA) in the Fixed Dialing Number (FDN) phonebook.
Page 665 LE910Cx AT Commands Reference Guide Test command reports the range of <mode> parameter values. 80502ST10950A Rev. 14 Page 665 of 1904 2022-03-04 Not Subject to NDA...
Page 666: At#Cmgs - Send Short Message
LE910Cx AT Commands Reference Guide 3.6.22. AT#CMGS - Send Short Message This command sends a short message. 3GPP TS 27.005 3GPP TS 23.040 3GPP TS 23.038 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT#CMGS=<param1>,<param2> Execution command sends a short message to the network. <param1> and <param2>...
Page 667 LE910Cx AT Commands Reference Guide Name Type Default Description <param1> integer length in bytes of the PDU to be sent (excluding the SMSC address octets) Value: 7÷164 : number of bytes <param2> PDU bytes In case of Text mode the parameters meaning is the following: Name Type Default...
Page 668 LE910Cx AT Commands Reference Guide then the ME/TA converts the entered text into GSM alphabet, according to 3GPP TS 27.005 Annex A. - if current <dcs> (see +CSMP) indicates that 8-bit or UCS2 data coding scheme is used and current <fo> (see +CSMP) indicates that 3GPP TS 23.040 TP-User-DataHeader-Indication is set, then the entered text should consist of two IRA character long hexadecimal numbers which ME/TA converts into 8-bit octet...
Page 669: At#Cmgw - Write Short Message To Memory
LE910Cx AT Commands Reference Guide 3.6.23. AT#CMGW - Write Short Message To Memory This command writes a new short message. 3GPP TS 27.005 3GPP TS 23.040 3GPP TS 23.038 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT#CMGW=<param1>,<param2>...
Page 670 LE910Cx AT Commands Reference Guide Name Type Default Description <param1> integer length in bytes of the PDU to be written Value: 7÷164 : number of bytes <param2> PDU bytes In case of Text mode the parameters meaning is the following: Name Type Default...
Page 671 LE910Cx AT Commands Reference Guide In Text mode, the text entered with <param2> should be enclosed between double quotes and formatted as follows: - if current <dcs> (see +CSMP) indicates that 3GPP TS 23.038 default alphabet is used and current <fo> (see +CSMP) indicates that 3GPP TS 23.040 TP-User-DataHeader-Indication is not set, then the ME/TA converts the entered text into GSM alphabet, according to 3GPP TS 27.005 Annex A.
Page 672: At#Cmglconcindex - Report Concatenated Sms Indexes
LE910Cx AT Commands Reference Guide 3.6.24. AT#CMGLCONCINDEX - Report Concatenated SMS Indexes The command reports list of all concatenated SMS SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT#CMGLCONCINDEX The command reports a line for each concatenated SMS containing: #CMGLCONCINDEX: <N>,<i>,<j>,<k>,...
Page 673 LE910Cx AT Commands Reference Guide <...> integer index of the next SMS segment ... AT#CMGLCONCINDEX=? Test command returns OK result code. Example of 2 concatenated SMS: First composed by 3 segments: 1,2,3, but segment 0 not received yet. Secondo composed by segments: 4,5,6,7,8, but segment 7 not received yet. AT#CMGLCONCINDEX #CMGLCONCINDEX: 3,0,2,3 #CMGLCONCINDEX: 5,4,5,6,0,8...
Page 674: At#E2Smsri - Sms Ring Indicator
LE910Cx AT Commands Reference Guide 3.6.25. AT#E2SMSRI - SMS Ring Indicator This set command enables/disables the Ring Indicator pin response to an incoming SMS message. If enabled, a negative going pulse is generated when receiving an incoming SMS message. SIM Presence Setting saved Can be aborted MAX timeout...
Page 675 LE910Cx AT Commands Reference Guide #E2SMSRI: <n> <n>=0 means that the RI pin response to an incoming SMS is disabled AT#E2SMSRI=? Reports the range of supported values for parameter <n> 80502ST10950A Rev. 14 Page 675 of 1904 2022-03-04 Not Subject to NDA...
Page 676: At#Smov - Sms Overflow
LE910Cx AT Commands Reference Guide 3.6.26. AT#SMOV - SMS Overflow The command is used to enable the SMS overflow signaling functionality. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Specific profile AT#SMOV=[<mode>] Set command enables the SMS overflow signaling function. If enabled, URC code is: #SMOV: <memo>...
Page 677 LE910Cx AT Commands Reference Guide When the maximum storage capacity has been reached, if enabled, a network-initiated notification is sent. AT#SMOV? Read command reports whether the SMS overflow signaling function is currently enabled or not, in the format: #SMOV: <mode> AT#SMOV=? Test command returns the supported range of values of parameter <mode>.
Page 678: At#Smsmove - Move Short Message To Other Memory
LE910Cx AT Commands Reference Guide 3.6.27. AT#SMSMOVE - Move Short Message to other Memory This command moves selected Short Message from current memory to destination memory. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT#SMSMOVE=<index> Execution command moves selected Short Message from current memory to destination memory.
Page 679 LE910Cx AT Commands Reference Guide Name Type Default Description <curr_mem> string current memory, selected by +CPMS command Values: SM : SIM SMS memory storage ME : NVM SMS storage <used_curr_mem> integer number of SMs stored in the current memory <total_curr_mem> integer max number of SMs that the current memory can contain...
Page 680 LE910Cx AT Commands Reference Guide AT#SMSMOVE? #SMSMOVE: "ME",3,100,"SM",0,50 The current memory is ME where 3 SMs are stored; the destination memory is SIM that is empty AT+CMGL=ALL +CMGL: 1,"STO UNSENT","32XXXXXXXX","", Test 1 +CMGL: 2,"STO UNSENT","32XXXXXXXX","", Test 2 +CMGL: 3,"STO UNSENT","32XXXXXXXX","", Test 3 List the SMs to discover the memory index AT#SMSMOVE=1...
Page 681: At#Smsucs - Sms Un-Change Status
LE910Cx AT Commands Reference Guide 3.6.28. AT#SMSUCS - SMS Un-Change Status Set commands to keep the SMS status. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT#SMSUCS=<mode> Set command allows to keep the SMS Status to UNREAD after +CMGR or +CMGL.
Page 682 LE910Cx AT Commands Reference Guide AT#SMSUCS? #SMSUCS: 1 AT+CMGR=1 +CMGR: "REC UNREAD","+393333075581","","08/07/07,10:48:44+36" TEST MESSAGE. AT+CMGR=1 +CMGR: "REC UNREAD","+393333075581","","08/07/07,10:48:44+36" TEST MESSAGE. 80502ST10950A Rev. 14 Page 682 of 1904 2022-03-04 Not Subject to NDA...
Page 683: At#Ismscfg - Sms Transport Configuration
LE910Cx AT Commands Reference Guide 3.6.29. AT#ISMSCFG - SMS Transport Configuration This command changes the configuration parameter for outgoing SMS. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#ISMSCFG=<mode> Set command changes the configuration parameter for outgoing SMS, which will be used to route the SMS either over CPS or over IMS (IP Multimedia Core Network Subsystem).
Page 684 LE910Cx AT Commands Reference Guide #ISMSCFG: <mode> AT#ISMSCFG=? Test command returns the supported range of values for parameter <mode>, in the format: #ISMSCFG: (list of supported <mode>s) 80502ST10950A Rev. 14 Page 684 of 1904 2022-03-04 Not Subject to NDA...
Page 685: Time & Alarm
LE910Cx AT Commands Reference Guide Time & Alarm 3.7.1. AT+CCLK - Clock Management The command is related to real time clock management. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT+CCLK=<time> Set command sets the real-time clock of the module. Parameter: Name Type...
Page 686 LE910Cx AT Commands Reference Guide : seconds (two digits are mandatory), range is 00..59 ±zz : time zone (indicates the difference, expressed in quarter of an hour, between the local time and GMT; two digits are mandatory), range is -96...+96 AT+CCLK? Read command returns the current setting <time>...
Page 687: At+Cala - Alarm Management
LE910Cx AT Commands Reference Guide 3.7.2. AT+CALA - Alarm Management This command is related to the alarm management. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT+CALA=<time>[,<n>[,<type>[,<text>[,<recurr>[,<silent>]]]]] Set command stores in the internal Real Time Clock of the module an alarm time with respective settings.
Page 688 LE910Cx AT Commands Reference Guide parameters to the factory default configuration. "hh:mm:ss±zz" string must be used only when issuing +CALA with parameter <recurr>. <n> integer index of the alarm Value: 0 : the only value supported <type> integer alarm behavior type Values: : reserved : the module wakes up fully operative as if the...
Page 689 LE910Cx AT Commands Reference Guide 3 : Wednesday 4 : Thursday 5 : Friday 6 : Saturday 7 : Sunday <silent> integer indicates if the alarm is silent or not Values: 0 : the alarm is not silent 1 : the alarm is silent Additional info: <type>=2 The module wakes up in "alarm mode"...
Page 690 LE910Cx AT Commands Reference Guide The module keeps on playing the alarm tone until a #WAKE or #SHDN command is received or a 90 s time-out occurs. If the device is in "alarm mode" and it does not receive the #WAKE command within 90s then it shuts down.
Page 691 LE910Cx AT Commands Reference Guide The module wakes up in "alarm mode" if at the alarm time it was off, otherwise it remains fully operative. In both cases the module sets high the RI output pin. The RI output pin remains high until next #WAKE issue or until a 90s timer expires.
Page 692 LE910Cx AT Commands Reference Guide +CALA: (list of supported <n>s),(list of supported <type>s),<tlength>,<rlength>,(list of supported <silent>s) Additional info: Parameters: Name Type Default Description <tlength> string maximum length of <text> parameter <rlength> string maximum length of <recurr> parameter AT+CALA="02/09/07,23:30:00+00" 80502ST10950A Rev. 14 Page 692 of 1904 2022-03-04 Not Subject to NDA...
Page 693: At+Csdf - Setting Date Format
LE910Cx AT Commands Reference Guide 3.7.3. AT+CSDF - Setting Date Format This command sets the date format of the date information presented to the user. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT+CSDF=[<mode>[,<auxmode>]] This command sets the date format of the date information presented to the user, which is specified by use of the <mode>...
Page 694 LE910Cx AT Commands Reference Guide <auxmode> integer TE-TA interface data format. Values: 1 : yy/MM/dd 2 : yyyy/MM/dd The <time> format of +CCLK and +CALA is: "yy/MM/dd,hh:mm:ss+zz" when <auxmode>=1 "yyyy/MM/dd,hh:mm:ss+zz" when <auxmode>=2 If the parameters are omitted (AT+CSDF=), then this command sets the default value of <mode>.
Page 695 LE910Cx AT Commands Reference Guide • AT+CSDF? +CSDF: 1,1 AT+CCLK? +CCLK: "00/01/02,03:42:08+00" • AT+CSDF=1,2 AT+CCLK? +CCLK: "2000/01/02,03:42:23+00" 80502ST10950A Rev. 14 Page 695 of 1904 2022-03-04 Not Subject to NDA...
Page 696: At+Ctzr - Time Zone Reporting
LE910Cx AT Commands Reference Guide 3.7.4. AT+CTZR - Time Zone Reporting This command enables and disables the time zone change event reporting. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT+CTZR=<onoff> Set command permits to enable/disable the time zone change event reporting.
Page 697 LE910Cx AT Commands Reference Guide +CTZR: <onoff> AT+CTZR=? Test command reports the supported range of values for parameter <onoff> 80502ST10950A Rev. 14 Page 697 of 1904 2022-03-04 Not Subject to NDA...
Page 698: At+Ctzu - Automatic Time Zone Update
LE910Cx AT Commands Reference Guide 3.7.5. AT+CTZU - Automatic Time Zone Update Set command enables/disables the automatic time zone update via NITZ. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Specific profile AT+CTZU=<onoff> Parameter: Name Type Default...
Page 699 LE910Cx AT Commands Reference Guide AT+CTZU? Read command reports the current setting of <onoff> in the format: +CTZU: <onoff> AT+CTZU=? Test command returns the supported values of parameter <onoff>. 80502ST10950A Rev. 14 Page 699 of 1904 2022-03-04 Not Subject to NDA...
Page 700: At#Cclk - Clock Management
LE910Cx AT Commands Reference Guide 3.7.6. AT#CCLK - Clock Management The command is related to real time clock management. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#CCLK=<time> Set command sets the real-time clock of the module. Parameter: Name Type...
Page 701 LE910Cx AT Commands Reference Guide : number of hours added to the local TZ because of Daylight Saving Time (summertime) adjustment; range is 0-2. AT#CCLK? Read command returns the current setting of the real-time clock, in the format <time>. If the time is set by the network but the Daylight-Saving Time (DST) information is missing, or the time is set by +CCLK command, then the <time>...
Page 702: At#Cclkmode - Clock Mode
LE910Cx AT Commands Reference Guide 3.7.7. AT#CCLKMODE - Clock Mode This command allows to enable the local time or the UTC time. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#CCLKMODE=<mode> Set command enables the local time or the UTC time in +CCLK and #CCLK commands and in #NITZ URC Parameter: Name...
Page 703 LE910Cx AT Commands Reference Guide Example of the two clock mode settings: AT#CCLKMODE? #CCLKMODE: 0 #NITZ: 13/03/05,15:20:33+04,0 AT+CCLK? +CCLK: "13/03/05,15:20:37+04" AT#CCLKMODE=1 AT+CCLK? +CCLK: "13/03/05,14:20:45+04" AT#CCLKMODE? #CCLKMODE: 1 #NITZ: 13/03/05,14:20:53+04,0 AT+CCLK? +CCLK: "13/03/05,14:20:55+04" AT#CCLKMODE=0 AT+CCLK? +CCLK: "13/03/05,15:20:59+04" 80502ST10950A Rev. 14 Page 703 of 1904 2022-03-04 Not Subject to NDA...
Page 704: At#Clksrc - Set Time Clock Source
LE910Cx AT Commands Reference Guide 3.7.8. AT#CLKSRC - Set Time Clock Source This command selects the source time clock. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#CLKSRC=<src> Set command selects the source time clock for the system between NITZ, GNSS or a combination between.
Page 705 LE910Cx AT Commands Reference Guide <curr> - the current source of time as displayed by +cclk command. Values are: 0 - INVALID. Time wasn't yet updated through NITZ, GNSS or Manual. 1 - NITZ source. 2 - GNSS source. 3 - Manual source. AT#CLKSRC=? Test command reports the supported range of values for parameter <src>.
Page 706: At#Wake - Wake From Alarm Mode
LE910Cx AT Commands Reference Guide 3.7.9. AT#WAKE - Wake from Alarm Mode Stop any alarm activity SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WAKE=<opmode> Execution command stops any eventually present alarm activity and, if the module is in alarm mode, it exits the alarm mode and enters the normal operating mode.
Page 707 LE910Cx AT Commands Reference Guide 0 - normal operating mode 1 - alarm mode or normal operating mode with some alarm activity. AT#WAKE=? Test command returns OK result code. The alarm mode is indicated by status ON of hardware pin CTS and by status ON of pin DSR;...
Page 708: At+Cstf - Setting Time Format
LE910Cx AT Commands Reference Guide 3.7.10. AT+CSTF - Setting Time Format Set command sets the time format of the time information presented to the user. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT+CSTF=[<mode>] Set command sets the time format of the time information presented to...
Page 709 LE910Cx AT Commands Reference Guide Test command reads the supported <mode>s as a compound value. +CSTF: (list of supported <mode>s) 80502ST10950A Rev. 14 Page 709 of 1904 2022-03-04 Not Subject to NDA...
Page 710: At+Cald - Delete Alarm
LE910Cx AT Commands Reference Guide 3.7.11. AT+CALD - Delete Alarm This command deletes an alarm in the ME. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT+CALD=<n> Execution command deletes an alarm in the ME. Parameter: Name Type...
Page 711: At#Nitz - Network Identity And Time Zone
LE910Cx AT Commands Reference Guide 3.7.12. AT#NITZ - Network Identity and Time Zone This command handles Network Identity and Time Zone. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT#NITZ=[<val>[,<mode>]] Set command enables/disables the automatic date/time updating and the Full Network Name applying.
Page 712 LE910Cx AT Commands Reference Guide <mode> integer enables/disables the #NITZ URC Values: 0 : disables the URC 1 : enables the URC Unsolicited field: Name Type Description <datetime> string string format depends on parameter <val> 'basic' "yy/MM/dd,hh:mm:ss" - format, if <val> is in (0..3) 'extended' "yy/MM/dd,hh:mm:ss±zz"...
Page 713 LE910Cx AT Commands Reference Guide are currently enabled or not in the format: #NITZ: <val>,<mode> AT#NITZ=? Test command returns supported values of parameters <val> and <mode>. 80502ST10950A Rev. 14 Page 713 of 1904 2022-03-04 Not Subject to NDA...
Page 714: Wlan
LE910Cx AT Commands Reference Guide WLAN 3.8.1. AT#WLANSTART - Enable/disable WLAN This command is used to enable/disable WLAN. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WLANSTART=<mode>[,<cid>[,<ip_family>]] Set command is used to enable/disable WLAN. Parameters: Name Type Default Description...
Page 715 LE910Cx AT Commands Reference Guide 6 : ipv6 Enable WLAN will start it as access point mode by default unless configure prior to start (AT#WLANMODE). In case of starting WLAN with no network (no SIM card, +CFUN=4, ...) WLAN will start without internet access and it will return +CME ERROR: No Internet Access if set AT#WLANSTART=1.
Page 716: At#Wlanbroadcast - Enable/Disable Broadcast
LE910Cx AT Commands Reference Guide 3.8.2. AT#WLANBROADCAST - Enable/disable broadcast This command is used to enable/disable broadcast. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WLANBROADCAST=<mode> Set command is used to enable/disable broadcast. Parameter: Name Type Default Description <mode>...
Page 717 LE910Cx AT Commands Reference Guide Test command returns the supported range of values for parameter <mode>. 80502ST10950A Rev. 14 Page 717 of 1904 2022-03-04 Not Subject to NDA...
Page 718: At#Wlanssid - Change Ssid Name
LE910Cx AT Commands Reference Guide 3.8.3. AT#WLANSSID - Change SSID name This command is used to change the SSID name. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WLANSSID=<ssid> Set command is used to change the SSID name. Parameter: Name Type...
Page 719: At#Wlanmode - Change Wlan Mode
LE910Cx AT Commands Reference Guide 3.8.4. AT#WLANMODE - Change WLAN mode This command is used to change the WLAN mode (AP/STA/AP+STA/AP+AP). SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WLANMODE=[<mode>] Set command is used to change the WLAN mode (AP/STA/AP+STA/AP+AP).
Page 720 LE910Cx AT Commands Reference Guide <mode> 0 - Access point mode 1 - STA mode 2 - AP+STA mode 3 - AP+AP mode AT#WLANMODE=? Test command returns the supported range of values for parameter <mode>. 80502ST10950A Rev. 14 Page 720 of 1904 2022-03-04 Not Subject to NDA...
Page 721: At#Wlanip - Return Assigned Ip Address
LE910Cx AT Commands Reference Guide 3.8.5. AT#WLANIP - Return assigned IP address This command returns the assigned IP address. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WLANIP Executing this command returns the assigned IP address. AT#WLANIP=? Test command returns OK.
Page 722: At#Wlansignal - Return Signal Strength Of The Network
LE910Cx AT Commands Reference Guide 3.8.6. AT#WLANSIGNAL - Return signal strength of the network This command returns the signal strength of the connected network. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WLANSIGNAL Executing this command returns the signal strength of the connected network.
Page 723: At#Wlanscan - Scanning Wifi Networks
LE910Cx AT Commands Reference Guide 3.8.7. AT#WLANSCAN - Scanning wifi networks This command is used for scanning Wi-Fi networks. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WLANSCAN=[<mode>] Set command for client mode only for scanning for Wi-Fi networks. Parameter: Name Type...
Page 724: At#Wlanconnect - Connect To Ssid
LE910Cx AT Commands Reference Guide 3.8.8. AT#WLANCONNECT - Connect to SSID This command is used to connect to a given SSID. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WLANCONNECT=<ssid>[,<security>,<key>] Set command for client mode only, to connect to a given SSID. Parameters: Name Type...
Page 725 LE910Cx AT Commands Reference Guide #WLANCONNECT: <ssid> AT#WLANCONNECT=? Test command reports supported values for the parameter <security> #WLANCONNECT: (0-1) 80502ST10950A Rev. 14 Page 725 of 1904 2022-03-04 Not Subject to NDA...
Page 726: At#Wlandisconnect - Disconnect From The Network
LE910Cx AT Commands Reference Guide 3.8.9. AT#WLANDISCONNECT - Disconnect from the network This command is used to disconnect the network. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WLANDISCONNECT Execution command will disconnect from the network. Relevant for client mode only.
Page 727: At#Wlanconfig - Add Or Change The Hostapd.conf
LE910Cx AT Commands Reference Guide 3.8.10. AT#WLANCONFIG - Add or change the hostapd.conf This command is used to add hostapd.conf file. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT#WLANCONFIG=<size> Set command allows to add or change the hostapd.conf. Hostapd configuration file controls many options with regards to AP mode only, in which not all are supported by the current WIFI chip.
Page 728: At#Wlansecurity - Add Hostapd.conf File
LE910Cx AT Commands Reference Guide 3.8.11. AT#WLANSECURITY - Add hostapd.conf file. This command allows changing WLAN security parameters. Relevant for AP mode only SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WLANSECURITY=<wpa>[,<key_mgmt>,<pairwise>,<key>] Set command allows changing WLAN security parameters. Relevant for AP mode only.
Page 729 LE910Cx AT Commands Reference Guide 1 : CCMP 2 : TKIP and CCMP <key> string The network's password. For both security type wpa/wpa2/wpa3, <key> length must be of 32 characters or less. AT#WLANSECURITY? Read command reports the current value of the parameters. AT#WLANSECURITY=? Test command returns the supported range of values for parameters <wpa>,<key_mgmt>,<pairwise>,<key>...
Page 730: At#Wlaneapcfg - Configure Wpa2-Eap Settings
LE910Cx AT Commands Reference Guide 3.8.12. AT#WLANEAPCFG - Configure WPA2-EAP settings Configure WPA2-EAP settings SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WLANEAPCFG=<method>[,<identity>,<password>,<priv_key_password>] Set command for configuring the EAP method and associated parameters. Parameters: Name Type Default Description <method>...
Page 731 LE910Cx AT Commands Reference Guide The <identity>,<password>,<private_key_password> parameters have a maximum length of 64 characters. AT#WLANEAPCFG? Read command returns the WPA2-EAP method and identifier name configured, in the format: # WLANEAPCFG: <method>,<identity> AT#WLANEAPCFG=? Test command reports supported values for the parameter. #WLANEAPCFG: (0- 4),"indentity@domain.com","password","priv_key_passwd"...
Page 732: At#Wlaneapcert - Store Wlan Eap Certificates
LE910Cx AT Commands Reference Guide 3.8.13. AT#WLANEAPCERT - Store WLAN EAP Certificates Store WLAN EAP Certificates SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WLANEAPCERT=<cert_type>,<size> Set command to store certificate files (CA Certificate, Client Certificate, and Client Private key) required for WPA2-EAP methods, into NVM. Parameters: Name Type...
Page 733 LE910Cx AT Commands Reference Guide AT#WLANEAPCERT=? Test command returns the supported values for the parameter. #WLANEAPCERT: (0-1) 80502ST10950A Rev. 14 Page 733 of 1904 2022-03-04 Not Subject to NDA...
Page 734: At#Wlancfgerror - Display Last Error In Detailed Form
LE910Cx AT Commands Reference Guide 3.8.14. AT#WLANCFGERROR - Display last error in detailed form This command displays the error of hostapd.conf file in detailed form. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WLANCFGERROR Execution command will display the last error in detailed form. AT#WLANCFGERROR=? Test command returns OK result code.
Page 735: At#Wlanindi - Enable/Disable Wlan Unsolicited Message
LE910Cx AT Commands Reference Guide 3.8.15. AT#WLANINDI - Enable/disable WLAN unsolicited message This command is used to enable/disable WLAN unsolicited message. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WLANINDI=<state> Set command is used to enable/disable WLAN unsolicited message. Parameter: Name Type...
Page 736 LE910Cx AT Commands Reference Guide AT#WLANINDI=? Test command returns the supported range of values for parameter <state>. 80502ST10950A Rev. 14 Page 736 of 1904 2022-03-04 Not Subject to NDA...
Page 737: At#Isel - Send Command Via Cellular Modem Or Linux Processor
LE910Cx AT Commands Reference Guide 3.8.16. AT#ISEL - Send command via cellular modem or Linux processor This command directs the WE866Cx Connection Manager to send command via cellular modem or Linux processor. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto...
Page 738 LE910Cx AT Commands Reference Guide #SLUDP #SRECV #SSENDUDP #SCFG #SCFGEXT #SCFGEXT2 #SCFGEXT3 #SLASTCLOSURE #SSENDUDPEXT #SSENDEXT #PKTSZ #DSTO NOTE: Since the connection manager interface is tightly coupled with USB configuration ports 13 and 14, the AT#ISEL commands will work in USBCFG 13 and 14 only. Hence, AT#ISEL should be executed after AT#CONNMGRSTART AT#ISEL? Read command reports the current mode enabled.
Page 739: At#Wlanbd - Store And Erase Custom Bin File
LE910Cx AT Commands Reference Guide 3.8.17. AT#WLANBD - Store and erase custom bin file This command is used to add or change the WLAN board data firmware file or otp file. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto...
Page 740 LE910Cx AT Commands Reference Guide AT#WLANBD? Read command returns status of the currently added wlan board data firmware file or otp file. #WLANBD : <index>,<size> #WLANBD : <index>,<size> Parameter: <index> The parameter indicate the kind of bin file. 0: bdwlan.bin (wlan board data firmware) 1: otp.bin (otp) <size>...
Page 741: At#Wlanicmp - Wlanicmp Ping Support
LE910Cx AT Commands Reference Guide 3.8.18. AT#WLANICMP - WLANICMP Ping Support This command enables/disables the ICMP Ping support on WLAN interface. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WLANICMP=<mode> Set Command enables/disables the ICMP Ping support on WLAN interface.
Page 742: At#Wlanping - Send Ping Request
LE910Cx AT Commands Reference Guide 3.8.19. AT#WLANPING - Send PING request This command is used to send Ping Echo Request Messages and to receive the corresponding Echo Reply on WLAN Interface. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WLANPING=<IPaddr>[,<retryNum>[,<len>[,<timeout>[,<ttl>]]]]...
Page 743 LE910Cx AT Commands Reference Guide Value: 10÷600 : timeout <ttl> integer Time to live Value: 1÷255 : Time to live Additional info: Once all the Echo Reply messages are received, a string like that is displayed: #WLANPING: <replyid>,<IP address>,<replyTime>,<ttl> Where: <replyid>...
Page 744 LE910Cx AT Commands Reference Guide Node will wait for all the ping replies and then displayed. For example, if retryNum is 64 then result is displayed once all 64 results are received. AT#WLANPING= "www.telit.com" #WLANPING: 01,"81.201.117.177",6,50 #WLANPING: 02,"81.201.117.177",5,50 #WLANPING: 03,"81.201.117.177",6,50 #WLANPING: 04,"81.201.117.177",5,50 80502ST10950A Rev.
Page 745: At#Wlanapclind - Wlan Ap Client List Change Notification
LE910Cx AT Commands Reference Guide 3.8.20. AT#WLANAPCLIND - WLAN AP client list change notification This command is used to enable/disable the WLAN AP client list change indication. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WLANAPCLIND=<mode> Set command is used to enable/disable the WLAN AP client list change indication.
Page 746 LE910Cx AT Commands Reference Guide 80502ST10950A Rev. 14 Page 746 of 1904 2022-03-04 Not Subject to NDA...
Page 747: At#Wlancmifsel - Select Between Concurrent Mode Interfaces
LE910Cx AT Commands Reference Guide 3.8.21. AT#WLANCMIFSEL - Select between Concurrent mode interfaces This command is used to switch between the two concurrent WLAN interfaces. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WLANCMIFSEL=<IFnum> Set command allows you to select the requested type of WLAN interface, to apply further AT commands.
Page 748 LE910Cx AT Commands Reference Guide Note: The default value is 0 AT#WLANCMIFSEL=? Test command returns the supported range of values for parameter <IFnum>. 80502ST10950A Rev. 14 Page 748 of 1904 2022-03-04 Not Subject to NDA...
Page 749: At#Wlanapclist - Wi-Fi Client Information
LE910Cx AT Commands Reference Guide 3.8.22. AT#WLANAPCLIST - Wi-Fi client information This Command returns number of clients, their MAC addresses , IP addresses, Host names, and Tx/Rx statistics. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WLANAPCLIST Returns number of clients, their MAC addresses , IP addresses, Host names, and Tx/Rx statistics.
Page 750: At#Wlanclock - Set Sdio Clock Of The Wlan
LE910Cx AT Commands Reference Guide 3.8.23. AT#WLANCLOCK - Set SDIO clock of the WLAN This command is used to set the SDIO clock of the WLAN interface SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#WLANCLOCK=<clock>...
Page 751 LE910Cx AT Commands Reference Guide #WLANCLOCK: <clock> Additional info: The parameter is displaying currently configured <clock> value Name Type Default Description <clock> integer The currently configured <clock> value Values: 1 : 400khz 2 : 20Mhz 3 : 25Mhz 4 : 50Mhz 5 : 100Mhz 6 : 200Mhz AT#WLANCLOCK=?
Page 752: At#Wlanmodule - Wlan Module Type
LE910Cx AT Commands Reference Guide 3.8.24. AT#WLANMODULE - WLAN Module Type This command is used to define the WLAN Module Type. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#WLANMODULE[=[<module_id>]] Set command allows to define WLAN module type to be used. It will select the appropriate WLAN board file to be downloaded to the module.
Page 753 LE910Cx AT Commands Reference Guide This is a one-time configuration command, the configuration is retained across reboots, power cycles, FOTA but not after XFP/TFI update. The configuration must be done again after XFP/TFI update. AT#WLANMODULE? Read command returns the current configured WLAN Module type #WLANMODULE: <module_id>...
Page 754: At#Wlandfs - Wlan Dfs Master Feature
LE910Cx AT Commands Reference Guide 3.8.25. AT#WLANDFS - WLAN DFS Master Feature This command is used to enable/disable WLAN DFS Master Feature. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#WLANDFS=[<dfs_master_en>] Set command allows to enable/disable WLAN DFS Master feature. It configures WLAN Access Point mode to operate or avoid DFS channels.
Page 755 LE910Cx AT Commands Reference Guide update. The configuration must be done again after XFP/TFI update. AT#WLANDFS? Read command returns the current DFS Master mode configuration. #WLANDFS: <configuration> Where: <configuration> 0 - DFS Master feature disabled 1 - DFS Master feature enabled AT#WLANDFS=? Test command reports supported range of values for all parameters.
Page 756: At#Wlanmacmode - Enable/Disable Mac Address Filtering
LE910Cx AT Commands Reference Guide 3.8.26. AT#WLANMACMODE - Enable/disable MAC address filtering This command is used to enable/disable the MAC address filter and is Relevant for AP mode only. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WLANMACMODE=<mode>...
Page 757 LE910Cx AT Commands Reference Guide Test command returns the supported range of values for parameter <mode> 80502ST10950A Rev. 14 Page 757 of 1904 2022-03-04 Not Subject to NDA...
Page 758: At#Connmgrstart - Start/Stop We866C3 Connection Manager
LE910Cx AT Commands Reference Guide 3.8.27. AT#CONNMGRSTART - Start/stop WE866C3 Connection Manager This command is used to start/stop the WE866C3 Connection Manager application. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#CONNMGRSTART=<operation>,<host_port_id> Set command is used to start/stop WE866C3 Connection Manager application.
Page 759 LE910Cx AT Commands Reference Guide AT#CONNMGRSTART? Read command return the current operating state: #CONNMGRSTART: <operation> Where: <operation> 0 - Not running 1 - Running AT#CONNMGRSTART=? Test command return the supported ranges AT#CONNMGRSTART=1,1 AT#CONNMGRSTART? #CONNMGRSTART: 1 AT#CONNMGRSTART=? #CONNMGRSTART: (0-1),(0-3) 80502ST10950A Rev. 14 Page 759 of 1904 2022-03-04 Not Subject to NDA...
Page 760: At#Wlanmacdeny - Add/Remove Mac Address To/From Deny List
LE910Cx AT Commands Reference Guide 3.8.28. AT#WLANMACDENY - Add/remove MAC address to/from deny list This command is used to add/remove MAC address to/from deny list. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WLANMACDENY=<mode>,<mac_address> Set command allows to add/remove MAC address to/from deny list. Relevant for AP mode only.
Page 761 LE910Cx AT Commands Reference Guide 80502ST10950A Rev. 14 Page 761 of 1904 2022-03-04 Not Subject to NDA...
Page 762: At#Wlanmacaccept - Add/Remove Mac Address To/From Accept List
LE910Cx AT Commands Reference Guide 3.8.29. AT#WLANMACACCEPT - Add/Remove MAC address to/from accept list This command allows to add/remove MAC address to/from accept list. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WLANMACACCEPT=<mode>,<mac_address> Set command allows to add/remove MAC address to/from accept list. Relevant for AP mode only.
Page 763 LE910Cx AT Commands Reference Guide 80502ST10950A Rev. 14 Page 763 of 1904 2022-03-04 Not Subject to NDA...
Page 764: At#Wlancountrycode - Set The Regulatory Domain
LE910Cx AT Commands Reference Guide 3.8.30. AT#WLANCOUNTRYCODE - Set the regulatory domain This command is used to change the country code. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WLANCOUNTRYCODE=<country_code> Set command allows to change the country code. Relevant for AP mode only.
Page 765 LE910Cx AT Commands Reference Guide 80502ST10950A Rev. 14 Page 765 of 1904 2022-03-04 Not Subject to NDA...
Page 766: At#Wlanmac - Return Wi-Fi Hot-Spot Mac Address
LE910Cx AT Commands Reference Guide 3.8.31. AT#WLANMAC - Return Wi-Fi Hot-Spot MAC address This command will return Wi-Fi Hot-Spot MAC address SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WLANMAC Execution Command will return Wi-Fi Hot-Spot MAC address AT#WLANMAC=? Test command returns OK AT#WLANMAC...
Page 767: At#Wlanpc - Change The Channel Number And The Wlan Protocol
LE910Cx AT Commands Reference Guide 3.8.32. AT#WLANPC - Change the channel number and the wlan protocol This command is used to change the AP channel number and the protocol. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#WLANPC=<mode>,<num>...
Page 768 LE910Cx AT Commands Reference Guide #WLANPC : <mode>,<num> For example: AT#WLANPC? #WLANPC: 1,12 AT#WLANPC=? Test command returns the supported range of values for parameter <mode>. 80502ST10950A Rev. 14 Page 768 of 1904 2022-03-04 Not Subject to NDA...
Page 769: Packet Domain
LE910Cx AT Commands Reference Guide Packet Domain 3.9.1. AT#SWITCHATTPROF - Enable/Disable special LTE attach policy based on operator requirements Enable/Disable special LTE attach policy based on operator requirements SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT#SWITCHATTPROF=<mode>...
Page 770 LE910Cx AT Commands Reference Guide AT#SWITCHATTPROF? Read command reports the currently selected <mode> in the format: #SWITCHATTPROF: <mode> AT#SWITCHATTPROF=? Test command reports the supported range of values. 80502ST10950A Rev. 14 Page 770 of 1904 2022-03-04 Not Subject to NDA...
Page 771: At#Dualapn - Double Pdp Context On Same Apn
LE910Cx AT Commands Reference Guide 3.9.2. AT#DUALAPN - Double PDP Context on Same APN Set command enables/disables the same APN multiple PDN feature. The network operator can reply with reject to the PDN Connectivity Request on an APN already in use with: Cause #55 - Multiple PDN connections for a given APN not allowed SIM Presence Setting saved...
Page 772 LE910Cx AT Commands Reference Guide AT#DUALAPN=? Test command returns the allowed values for parameter <mode>. 80502ST10950A Rev. 14 Page 772 of 1904 2022-03-04 Not Subject to NDA...
Page 773: At+Cgclass - Gprs Mobile Station Class
LE910Cx AT Commands Reference Guide 3.9.3. AT+CGCLASS - GPRS Mobile Station Class This command sets the GPRS class. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT+CGCLASS=[<class>] Set command sets the GPRS class according to <class> parameter. Parameter: Name Type...
Page 774 LE910Cx AT Commands Reference Guide AT+CGCLASS=? Test command reports the range for the parameter <class>. 80502ST10950A Rev. 14 Page 774 of 1904 2022-03-04 Not Subject to NDA...
Page 775: At#Labims - Ims (34.299) Configuration For Gcf/Ptcrb Certification
LE910Cx AT Commands Reference Guide 3.9.4. AT#LABIMS - IMS (34.299) Configuration for GCF/PTCRB certification IMS (34.299) Configuration for GCF/PTCRB certification SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT#LABIMS resets the IMS parameters in the NVM of the device to the IR92 for GCF/PTCRB certification.
Page 776: At+Cgqreq - Quality Of Service Profile (Requested)
LE910Cx AT Commands Reference Guide 3.9.5. AT+CGQREQ - Quality of Service Profile (Requested) Set command allows to specify a Quality of Service Profile (requested) that is used when the terminal sends an Activate PDP Context Request message to the network. It specifies a profile for the context identified by the (local) context identification parameter, <cid>.
Page 777 LE910Cx AT Commands Reference Guide Value: 0÷max : use test command to know the values range <peak> integer peak throughput class Value: 0÷max : use test command to know the values range <mean> integer mean throughput class Value: 0÷max : use test command to know the values range If a value is omitted for a particular class then this class, is not checked AT+CGQREQ=<cid>...
Page 778 LE910Cx AT Commands Reference Guide AT+CGQREQ=? Test command returns as a compound value the type of the current PDP context and the supported values for the sub parameters in the format: +CGQREQ: <PDP_Type>, (list of supported <precedence>s),(list of supported <delay>s), (list of supported <reliability>s),(list of supported <peak>s), (list of supported <mean>s) Additional info:...
Page 779: At+Cgdcont - Define Pdp Context
LE910Cx AT Commands Reference Guide 3.9.6. AT+CGDCONT - Define PDP Context Define PDP Context. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT+CGDCONT=[<cid>[,<PDP_type>[,<APN>[,<PDP_addr>[,<d_comp>[,<h_comp>[,<I Pv4AddrAlloc>[,<Emergency_ind>]]]]]]]] Set command specifies PDP context parameter values for a PDP context identified by the (local) context identification parameter, <cid>.
Page 780 LE910Cx AT Commands Reference Guide <APN> string (Access Point Name) a string parameter which is a logical name that is used to select the GGSN or the external packet data network. If the value is empty ("") or omitted, then the subscription value will be requested.
Page 781 LE910Cx AT Commands Reference Guide Values: 0 : IPv4 Address Allocation through NAS Signaling 1 : IPv4 Address Allocated through DHCP <Emergency_ind> integer indicates whether the PDP context is for emergency bearer services or not. Values: 0 : PDP context is not for emergency bearer services 1 : PDP context is for emergency bearer services...
Page 782 LE910Cx AT Commands Reference Guide In case of Docomo network operator, profile 5 is reserved for dedicated Device Management profile only. AT+CGDCONT? Read command returns the current settings for each defined context in the format: +CGDCONT: <cid>,<PDP_type>,<APN>,<PDP_addr>,<d_comp>,<h_comp>,<IPv4Add rAlloc>,<Emergency_ind><CR><LF> +CGDCONT: <cid>,<PDP_type>,<APN>,<PDP_addr>,<d_comp>,<h_comp>,<IPv4Add rAlloc>,<Emergency_ind>[...] AT+CGDCONT=? Test command returns values supported as a compound value.
Page 783: At+Cgcontrdp - Pdp Context Read Dynamic Parameters
LE910Cx AT Commands Reference Guide 3.9.7. AT+CGCONTRDP - PDP Context Read Dynamic Parameters The execution command returns the relevant information for a PDP Context established by the network. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto...
Page 784 LE910Cx AT Commands Reference Guide Additional info: List of the meaning of the response message parameters. Name Type Default Description <berrerId> integer identifies the bearer, EPS Bearer in EPS and NSAPI in UMTS/GPRS. <apn> string logical name used to select the GGSN or the external packet data network.
Page 785 LE910Cx AT Commands Reference Guide for IPv4: "a1.a2.a3.a4.m1.m2.m3.m4" for IPv6: "a1.a2.a3.a4.a5.a6.a7.a8.a9.a10.a11.a12.a13.a14.a15.a16. m1.m2.m3.m4.m5.m6.m7.m8.m9.m10.m11.m12. m13.m14.m15.m16" When +CGPIAF is supported, its settings can influence the format of this parameter returned with the execute form of +CGCONTRDP. The dynamic part of the PDP context will only exist if established by the network.
Page 786 LE910Cx AT Commands Reference Guide AT+CGACT=1,1 AT+CGCONTRDP=? +CGCONTRDP: (1) AT+CGCONTRDP =1 +CGCONTRDP: 1,5,lte.ktfwing.com,"10.196.170.243.255.255.255.248","10.196.170.244","172.19.140.7 ","172.25.227.7" 80502ST10950A Rev. 14 Page 786 of 1904 2022-03-04 Not Subject to NDA...
Page 787: At#Imssetting - Sets Ims Parameters
LE910Cx AT Commands Reference Guide 3.9.8. AT#IMSSETTING - Sets IMS parameters This command sets the IMS parameters. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#IMSSETTING=<mode>[,<value>] This command sets the IMS parameters. Parameters: Name Type Default Description <mode>...
Page 788 LE910Cx AT Commands Reference Guide AT#IMSSETTING=<mode>, read command is made for parameter <mode>. Default value of <SMS Over IP Network Indication> for ATT firmware / Softbank firmware / Telstra firmware / Vodafone NZ firmware are configured to '0' and for the others are '1'. Default value of <sipt1>, <sipt2>...
Page 789: At+Cgqmin - Quality Of Service Profile (Minimum Acceptable)
LE910Cx AT Commands Reference Guide 3.9.9. AT+CGQMIN - Quality of Service Profile (Minimum Acceptable) Set command allows to specify a minimum acceptable profile which is checked by the terminal against the negotiated profile returned in the Activate PDP Context Accept message.
Page 790 LE910Cx AT Commands Reference Guide Value: 0÷max : use test command to know the values range <peak> integer peak throughput class Value: 0÷max : use test command to know the values range <mean> integer mean throughput class Value: 0÷max : use test command to know the values range If a value is omitted for a class, then this class is not checked.
Page 791 LE910Cx AT Commands Reference Guide Test command returns as a compound value the type of the current PDP context and the supported values for the sub parameters in the format: +CGQMIN: <PDP_Type>, (list of supported <precedence>s),(list of supported <delay>s), (list of supported <reliability>s),(list of supported <peak>s), (list of supported <mean>s) Additional info: PDP type meaning.
Page 792: At+Cgeqreq - 3G Quality Of Service Profile (Requested)
LE910Cx AT Commands Reference Guide 3.9.10. AT+CGEQREQ - 3G Quality of Service Profile (Requested) The command allows to specify a 3G quality of service profile for the context identified by the context identification parameter. [1] 3GPP TS 27.007 [2] 3GPP TS 23.107 SIM Presence Setting saved Can be aborted...
Page 793 LE910Cx AT Commands Reference Guide 3 : background 4 : subscribed value <Maximum integer maximum bitrate Up Link (kbits/s) bitrate UL> Values: : subscribed value 1÷11520 : supported range <Maximum integer maximum bitrate down link (kbits/s) bitrate DL> Values: : subscribed value 1÷42200 : supported range <Guaranteed integer...
Page 794 LE910Cx AT Commands Reference Guide 0 : disable 1 : enable 2 : subscribed value <Maximum integer maximum SDU size in octets SDU size> Values: : subscribed value 1÷1520 : supported range <SDU error string SDU error ratio - mEe = m*10-e , for ratio>...
Page 795 LE910Cx AT Commands Reference Guide 1E2 : means 1*10-2 5E3 : means 5*10-3 4E3 : means 4*10-3 1E3 : means 1*10-3 1E4 : means 1*10-4 1E5 : means 1*10-5 1E6 : means 1*10-6 6E8 : means 6*10-8 <Delivery of integer delivery of erroneous SDUs erroneous SDUs>...
Page 796 LE910Cx AT Commands Reference Guide : subscribed value 1÷3 : supported range <Source integer specifies characteristics of the Statistics source of the submitted SDUs for a Descriptor> PDP context. This parameter should be provided if the Traffic class is specified as conversational or streaming (refer 3GPP TS 24.008 [8] subclause 10.5.6.5).
Page 797 LE910Cx AT Commands Reference Guide [+CGEQREQ: <cid>,<Traffic class>,<Maximum bitrate UL>,<Maximum bitrate DL>,<Guaranteed bitrate UL>,<Guaranteed bitrate DL>,<Delivery order>,<Maximum SDU size>,<SDU error ratio>,<Residual bit error ratio>,<Delivery of erroneous SDUs>,<Transfer delay>,<Traffic handling>,<Source Statistics Descriptor> ,<Signalling Indication><CR><LF>][...] If no PDP context defined, it has no effect and OK result code returned. AT+CGEQREQ=? Test command returns as a compound value the type of the current PDP context and the supported values for the sub parameters in the format:...
Page 798 LE910Cx AT Commands Reference Guide AT+CGEQREQ=1,0,384,384,128,128,0,0,"0E0","0E0",0,0,0 AT+CGEQREQ? +CGEQREQ: 1,0,384,384,128,128,0,0,"0E0","0E0",0,0,0,0,0 AT+CGEQREQ=? +CGEQREQ: "IP",(0-4),(0-11520),(0-42200),(0-11520),(0-42200),(0-2),(0- 1520),("0E0","1E1","1E2","7E3","1E3","1E4","1E5","1E6"),("0E0","5E2","1E2","5E3","4 E3","1E3","1E4","1E5","1E6","6E8"),(0-3),(0,100-4000),(0-3),(0,1),(0,1) +CGEQREQ: "PPP",(0-4),(0-11520),(0-42200),(0-11520),(0-42200),(0-2),(0- 1520),("0E0","1E1","1E2","7E3","1E3","1E4","1E5","1E6"),("0E0","5E2","1E2","5E3","4 E3","1E3","1E4","1E5","1E6","6E8"),(0-3),(0,100-4000),(0-3),(0,1),(0,1) +CGEQREQ: "IPV6",(0-4),(0-11520),(0-42200),(0-11520),(0-42200),(0-2),(0- 1520),("0E0","1E1","1E2","7E3","1E3","1E4","1E5","1E6"),("0E0","5E2","1E2","5E3","4 E3","1E3","1E4","1E5","1E6","6E8"),(0-3),(0,100-4000),(0-3),(0,1),(0,1) +CGEQREQ: "IPV4V6",(0-4),(0-11520),(0-42200),(0-11520),(0-42200),(0-2),(0- 1520),("0E0","1E1","1E2","7E3","1E3","1E4","1E5","1E6"),("0E0","5E2","1E2","5E3","4 E3","1E3","1E4","1E5","1E6","6E8"),(0-3),(0,100-4000),(0-3),(0,1),(0,1) 80502ST10950A Rev. 14 Page 798 of 1904 2022-03-04 Not Subject to NDA...
Page 799: At+Cgeqneg - 3G Quality Of Service Profile (Negotiated)
LE910Cx AT Commands Reference Guide 3.9.11. AT+CGEQNEG - 3G Quality of Service Profile (Negotiated) This command allows the TE to retrieve the negotiated 3G quality of service returned in the Activate PDP Context Accept/Modify message. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout...
Page 800 LE910Cx AT Commands Reference Guide AT+CGEQNEG=? Test command returns a list of <cid>s associated with active contexts. AT+CGEQREQ? +CGEQREQ: 1,4,0,0,0,0,2,0,"0E0","0E0",3,0,0,0,0 AT+CGACT=1,1 AT+CGEQNEG=? +CGEQNEG: (1) AT+CGEQNEG=1 +CGEQNEG: 1,3,128,384,0,0,2,1500,"1E4","1E5",3,0,1,0,0 80502ST10950A Rev. 14 Page 800 of 1904 2022-03-04 Not Subject to NDA...
Page 801: At+Cgpaddr - Show Pdp Address
LE910Cx AT Commands Reference Guide 3.9.12. AT+CGPADDR - Show PDP Address This command returns a list of PDP addresses for the specified context identifiers. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CGPADDR=[<cid>[,...]] Execution command returns a list of PDP addresses for the specified context identifiers.
Page 802 LE910Cx AT Commands Reference Guide PDP. The address may be static or dynamic: for a static address, it will be the one set by the +CGDCONT command when the context was defined for a dynamic address it will be the one assigned during the last PDP context activation that used the context definition referred...
Page 803 LE910Cx AT Commands Reference Guide AT+CGACT=1,3 AT+CGACT? +CGACT: 1,0 +CGACT: 2,0 +CGACT: 3,1 AT+CGPADDR=3 +CGPADDR: 3,”xxx.yyy.zzz.www” AT+CGPADDR=? +CGPADDR: (3) 80502ST10950A Rev. 14 Page 803 of 1904 2022-03-04 Not Subject to NDA...
Page 804: At+Cgcmod - Modify Pdp Context
LE910Cx AT Commands Reference Guide 3.9.13. AT+CGCMOD - Modify PDP Context The execution command is used to modify the specified PDP context(s) with respect to QoS profiles and TFTs. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CGCMOD=[<cid_n>[,...]] After command has completed, the MT returns to V.250 online data state.
Page 805: At#Autoatt - Auto-Attach Property
LE910Cx AT Commands Reference Guide 3.9.14. AT#AUTOATT - Auto-Attach Property Execution command has no effect and is included only for backward compatibility. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT#AUTOATT=[<auto>] Parameter: Name Type Default Description <auto>...
Page 806: At#Msclass - Multislot Class Control
LE910Cx AT Commands Reference Guide 3.9.15. AT#MSCLASS - Multislot Class Control Set command sets the GPRS multislot class. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT#MSCLASS=[<class>[,<autoattach>]] Parameters: Name Type Default Description <class> integer GPRS multislot class. Values: 1÷12 : class...
Page 807 LE910Cx AT Commands Reference Guide Read command reports the current value of the multislot class in the format: #MSCLASS: <class> AT#MSCLASS=? Test command reports the range of available values for both parameters <class> and <autoattach>. 80502ST10950A Rev. 14 Page 807 of 1904 2022-03-04 Not Subject to NDA...
Page 808: At#Imsua - Ims User Agent
LE910Cx AT Commands Reference Guide 3.9.16. AT#IMSUA - IMS user agent This command sets IMS user agent. The user agent string needs to be sent with SIP message. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT#IMSUA=<UserAgent>...
Page 809 LE910Cx AT Commands Reference Guide AT#IMSUA="ims" AT#IMSUA? #IMSUA: ims AT#IMSUA=? #IMSUA: (549) 80502ST10950A Rev. 14 Page 809 of 1904 2022-03-04 Not Subject to NDA...
Page 810: At#Gauth - Ppp Data Connection Authentication Type
LE910Cx AT Commands Reference Guide 3.9.17. AT#GAUTH - PPP Data Connection Authentication Type This command sets the authentication type used in PDP Context Activation during PPP- PS connections. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT#GAUTH=[<type>] Set command sets the authentication type used in PDP Context Activation during PPP-PS connections.
Page 811 LE910Cx AT Commands Reference Guide #GAUTH: <type> AT#GAUTH=? Test command returns the range of supported values for parameter <type>. 80502ST10950A Rev. 14 Page 811 of 1904 2022-03-04 Not Subject to NDA...
Page 812: At#Gpppcfg - Ppp-Gprs Parameters Configuration
LE910Cx AT Commands Reference Guide 3.9.18. AT#GPPPCFG - PPP-GPRS Parameters Configuration This command permits to set parameters for a PPP-GPRS connection SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT#GPPPCFG=<hostIPaddress>[,<unused_A>][,<unused_B>]] Set command sets one parameter for a dial-up connection Parameters: Name Type...
Page 813 LE910Cx AT Commands Reference Guide AT#GPPPCFG=? Test command returns the range of supported values for parameters #GPPPCFG: (25),(0) 80502ST10950A Rev. 14 Page 813 of 1904 2022-03-04 Not Subject to NDA...
Page 814: At+Cgeqmin - 3G Quality Of Service Profile (Minimum Acceptable)
LE910Cx AT Commands Reference Guide 3.9.19. AT+CGEQMIN - 3G Quality of Service Profile (Minimum Acceptable) This command sets the 3G Quality of Service parameters for the context identified by the context identification parameter. 3GPP TS 27.007; 3GPP TS 03.60/23.060; 3GPP TS 24.008 SIM Presence Setting saved Can be aborted...
Page 815 LE910Cx AT Commands Reference Guide 3 : background 4 : subscribed value <Maximum integer maximum bitrate Up Link (kbits/s) bitrate UL> Values: : subscribed value 1÷11520 : supported range <Maximum integer maximum bitrate down link (kbits/s) bitrate DL> Values: : subscribed value 1÷42200 : supported range <Guaranteed integer...
Page 816 LE910Cx AT Commands Reference Guide 0 : No - SDU 1 : Yes - SDU 2 : subscribed value <Maximum integer maximum SDU size in octets. SDU size> Values: : subscribed value 1÷1520 : supported range <SDU error string SDU error ratio - mEe = m*10-e , for ratio>...
Page 817 LE910Cx AT Commands Reference Guide 5E2 : means 5*10-2 1E2 : means 1*10-2 5E3 : means 5*10-3 4E3 : means 4*10-3 1E3 : means 1*10-3 1E4 : means 1*10-4 1E5 : means 1*10-5 1E6 : means 1*10-6 6E8 : means 6*10-8 <Delivery of integer delivery of erroneous SDUs.
Page 818 LE910Cx AT Commands Reference Guide Values: : subscribed value 1÷3 : supported range <Source integer specifies characteristics of the Statistics source of the submitted SDUs for a Descriptor> PDP context. This parameter should be provided if the Traffic class is specified as conversational or streaming (refer 3GPP TS 24.008 [8] subclause 10.5.6.5).
Page 819 LE910Cx AT Commands Reference Guide AT+CGEQMIN? Read command returns the current settings for each defined context in the format: [+CGEQMIN: <cid>,<Traffic class>,<Maximum bitrate UL>,<Maximum bitrate DL>,<Guaranteed bitrate UL>,<Guaranteed bitrate DL>,<Delivery order>,<Maximum SDU size>,<SDU error ratio>,<Residual bit error ratio>,<Delivery of erroneous SDUs>,<Transfer delay>,<Traffic handling><Source statistics descriptor>,<Signalling indication><CR><LF>] [+CGEQMIN:...] If no PDP context defined, it has no effect and OK result code returned.
Page 820 LE910Cx AT Commands Reference Guide AT+CGEQMIN=1,0,384,384,128,128,0,0,"0E0","0E0",0,0,0 AT+CGEQMIN? +CGEQMIN: 1,0,384,384,128,128,0,0,"0E0","0E0",0,0,0 AT+CGEQMIN=? +CGEQMIN: "IP",(0-4),(0-11520),(0-42200),(0-11520),(0-42200),(0-2), 1520),("0E0","1E1","1E2","7E3","1E3","1E4","1E5","1E6"),("0E0","5E2","1E2","5E3","4 E3","1E3","1E4","1E5","1E6","6E8"),(0-3),(0,100-4000),(0-3),(0,1),(0,1) +CGEQMIN: "PPP",(0-4),(0-11520),(0-42200),(0-11520),(0-42200),(0-2),(0- 1520),("0E0","1E1","1E2","7E3","1E3","1E4","1E5","1E6"),("0E0","5E2","1E2","5E3","4 E3","1E3","1E4","1E5","1E6","6E8"),(0-3),(0,100-4000),(0-3),(0,1),(0,1) +CGEQMIN: "IPV6",(0-4),(0-11520),(0-42200),(0-11520),(0-42200),(0-2),(0- 1520),("0E0","1E1","1E2","7E3","1E3","1E4","1E5","1E6"),("0E0","5E2","1E2","5E3","4 E3","1E3","1E4","1E5","1E6","6E8"),(0-3),(0,100-4000),(0-3),(0,1),(0,1) +CGEQMIN: "IPV4V6",(0-4),(0-11520),(0-42200),(0-11520),(0-42200),(0-2),(0- 1520),("0E0","1E1","1E2","7E3","1E3","1E4","1E5","1E6"),("0E0","5E2","1E2","5E3","4 E3","1E3","1E4","1E5","1E6","6E8"),(0-3),(0,100-4000),(0-3),(0,1),(0,1) 80502ST10950A Rev. 14 Page 820 of 1904 2022-03-04 Not Subject to NDA...
Page 821: At+Cgeqos - Define Eps Quality Of Service
LE910Cx AT Commands Reference Guide 3.9.20. AT+CGEQOS - Define EPS Quality of Service The command specifies the EPS Quality of Service parameters. [1] 3GPP TS 23.203 [2] 3GPP TS 24.301 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT+CGEQOS=[<cid>[,<QCI>...
Page 822 LE910Cx AT Commands Reference Guide omitted for a non-GBR QCI, see standard [2]. <UL_GBR> integer indicates UL GBR in case of GBR QCI. The value is in kbit/s. This parameter is omitted for a non-GBR QCI, see standard [2]. <DL_MBR> integer it indicates DL MBR in case of GBR QCI.
Page 823: At+Cgpiaf - Printing Ip Address Format
LE910Cx AT Commands Reference Guide 3.9.21. AT+CGPIAF - Printing IP Address Format This command selects the printout format of the IPv6 address. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT+CGPIAF=[<IPv6_AddressFormat>[,<IPv6_SubnetNotation>[,<IPv6_LeadingZer os> [,<Pv6_CompressZeros>]]]] Parameters: Name Type...
Page 824 LE910Cx AT Commands Reference Guide Values: 0 : both IP address, and subnet mask are started explicitly, separated by a space. 1 : the printout format is applying /(forward slash) subnet-prefix Classless Inter-Domain Routing (CIDR) notation. <IPv6_LeadingZeros> integer selects whether leading zeros are omitted or not.
Page 825 LE910Cx AT Commands Reference Guide AT+CGPIAF=? Test command returns values supported as compound values. AT+CGPIAF=0,0,0,0 AT+CGACT=1,1 AT+CGPADDR = +CGPADDR: 1,"252.1.171.171.205.205.239.224.0.0.0.0.0.0.0.1" AT+CGPIAF=1,0,0,0 AT+CGACT=1,1 AT+CGPADDR = +CGPADDR: 1,"FC01:ABAB:CDCD:EFE0:0:0:0:1" 80502ST10950A Rev. 14 Page 825 of 1904 2022-03-04 Not Subject to NDA...
Page 826: At+Cevdp - Voice Domain Preference
LE910Cx AT Commands Reference Guide 3.9.22. AT+CEVDP - Voice Domain Preference This set command selects the voice domain preference. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT+CEVDP=<domain> Parameter: Name Type Default Description <domain>...
Page 827 LE910Cx AT Commands Reference Guide +CEVDP: <domain> AT+CEVDP=? Test command returns the supported range of values of the parameter <domain>. 80502ST10950A Rev. 14 Page 827 of 1904 2022-03-04 Not Subject to NDA...
Page 828: At+Cgerep - Packet Domain Event Reporting
LE910Cx AT Commands Reference Guide 3.9.23. AT+CGEREP - Packet Domain Event Reporting This command enables or disables the presentation of unsolicited result codes. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Specific profile AT+CGEREP=[<mode>[,<bfr>]] Set command enables/disables sending of unsolicited result codes in case of certain events occurring in the module or in the network.
Page 829 LE910Cx AT Commands Reference Guide <bfr> integer controls the effect on buffered codes when <mode> 1 or 2 is entered. Values: 0 : TA buffer of unsolicited result codes defined within this command is cleared when <mode> 1 or 2 is entered.
Page 830 LE910Cx AT Commands Reference Guide The mobile equipment has forced a PS detach. This implies that all active contexts have been deactivated. These are not reported separately. +CGEV: ME_DETACH The network has forced a PS detach. This implies that all active contexts have been deactivated.
Page 831 LE910Cx AT Commands Reference Guide +CGEREP: <mode>,<bfr> AT+CGEREP=? Test command reports the supported range of values for the +CGEREP command parameters. 80502ST10950A Rev. 14 Page 831 of 1904 2022-03-04 Not Subject to NDA...
Page 832: At+Cgatt - Ps Attach Or Detach
LE910Cx AT Commands Reference Guide 3.9.24. AT+CGATT - PS Attach or Detach This execution command is used to register (attach) the terminal to or deregister (detach) the terminal from the Packet Domain service. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT...
Page 833 LE910Cx AT Commands Reference Guide AT+CGATT? +CGATT: 0 AT+CGATT=? +CGATT: (0,1) AT+CGATT=1 80502ST10950A Rev. 14 Page 833 of 1904 2022-03-04 Not Subject to NDA...
Page 834: At+Cgtft - Traffic Flow Template
LE910Cx AT Commands Reference Guide 3.9.25. AT+CGTFT - Traffic Flow Template This command allows the TE to specify a Packet Filter - PF for a Traffic Flow Template - TFT that is used in the GGSN in UMTS/GPRS and Packet GW in EPS for routing of packets onto different QoS flows towards the TE.
Page 835 LE910Cx AT Commands Reference Guide PDP contexts associated to one PDP address. At an attempt to delete a TFT, which would violate this rule, an ERROR or +CME ERROR response is returned. Extended error responses are enabled by the +CMEE command. Possible Response(s): ERROR Parameters:...
Page 836 LE910Cx AT Commands Reference Guide <prot The value range is from 0 to 255. num(ipv4) /next hdr(ipv6) > <destinati stri The string is given as dot-separated numeric (0-65535) on port parameters on the form "f.t". range> <source stri The string is given as dot-separated numeric (0-65535) port parameters on the form "f.t".
Page 837 LE910Cx AT Commands Reference Guide AT+CGTFT: <cid>, <packet filter identifier>, <evaluation precedence index>, <source address and subnet mask>, <protocol number (ipv4) / next header (ipv6)>, <destination port range>, <source port range>, <ipsec security parameter index (spi)>, <type of service (tos) (ipv4) and mask /traffic class (ipv6) and mask>, <flow label (ipv6)>...
Page 838: At+Cgdata - Enter Data State
LE910Cx AT Commands Reference Guide 3.9.26. AT+CGDATA - Enter Data State This command causes the device to establish a connection with the network. Commands following +CGDATA command in the AT command line shall not be processed by the device. SIM Presence Setting saved Can be aborted MAX timeout...
Page 839 LE910Cx AT Commands Reference Guide • AT+CGDATA=? +CGDATA: ("PPP") AT+CGDATA="PPP",1 80502ST10950A Rev. 14 Page 839 of 1904 2022-03-04 Not Subject to NDA...
Page 840: At+Cgeqosrdp - Eps Quality Of Service Read Dynamic Parameters
LE910Cx AT Commands Reference Guide 3.9.27. AT+CGEQOSRDP - EPS Quality of Service Read Dynamic Parameters The command returns the parameters related to the Quality of Service. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CGEQOSRDP=[<cid>] The execution command returns the Quality of Service parameters <QCI>, [<DL_GBR>...
Page 841 LE910Cx AT Commands Reference Guide Name Type Default Description <QCI> integer specifies a class of EPS QoS. (see 3GPP TS 23.203 [85])0 QCI is selected by network [1..4] value range for guaranteed bit rate Traffic Flows [5..9] value range for non-guaranteed bit rate Traffic Flows.
Page 842: At+Cgtftrdp - Traffic Flow Template Read Dynamic Parameters
LE910Cx AT Commands Reference Guide 3.9.28. AT+CGTFTRDP - Traffic Flow Template Read Dynamic Parameters This command returns the relevant information about Traffic Flow Template of <cid> together with the additional network assigned values when established by the network. 3GPP TS 27.007; 3GPP TS 03.60/23.060 SIM Presence Setting saved Can be aborted...
Page 843 LE910Cx AT Commands Reference Guide <cid> integer a numeric parameter which specifies a particular PDP context definition or Traffic Flows definition. Additional info: List of the meaning of the response message parameters. Type Description <pack intege packet filter identifier filter identi fier>...
Page 844 LE910Cx AT Commands Reference Guide "a1.a2.a3.a4.a5.a6.a7.a8.a9.a10.a11.a12.a13.a14.a15.a16. mask m1.m2.m3.m4.m5.m6.m7.m8.m9.m10.m11.m12.m13.m1 > 4.m15.m16" for IPv6. <prot string protocol number for ipv4 or next header for ipv6 ocol numb er/ne head er> Value: 0÷255 : supported range <dest string The string is given as dot-separated numeric (0-65535) inatio parameters on the form "f.t"...
Page 845 LE910Cx AT Commands Reference Guide mask > <flow valid for IPv6 only label (ipv6) > Value: 00000÷FFFFF : supported range <dire string specifies the transmission direction in which the Packet ction Filter shall be applied > Values: 0 : Pre Release 7 TFT Filter (see 3GPP TS 24.008, table 10.5.162) 1 : Uplink 2 : Downlink 3 : Bidirectional (Used for Uplink and Downlink)
Page 846 LE910Cx AT Commands Reference Guide AT+CGTFTRDP=? +CGTFTRDP: (list of <cid>s associated with active secondary or non secondary contexts) Some of the above listed attributes can coexist in a Packet Filter while others mutually exclude each other. The possible combinations listed on 3GPP TS 23.060 [47]. 80502ST10950A Rev.
Page 847: At#Pppcfg - Ppp Configuration
LE910Cx AT Commands Reference Guide 3.9.29. AT#PPPCFG - PPP Configuration This command configures the PPP mode. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT#PPPCFG=<mode> Set command sets the active/passive PPP mode Parameter: Name Type Default Description <mode>...
Page 848: At+Cgact - Pdp Context Activate Or Deactivate
LE910Cx AT Commands Reference Guide 3.9.30. AT+CGACT - PDP Context Activate or Deactivate This command activates or deactivates the specified PDP context(s). 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CGACT=[<state>[,<cid>[,<cid>][,...]]]] Parameters: Name Type Default Description <state>...
Page 849 LE910Cx AT Commands Reference Guide +CGACT: <cid>,<state>[<CR><LF> +CGACT: <cid>,<state>[...]] AT+CGACT=? Test command reports information on the supported PDP context activation states <state>. AT+CGACT=1,1 AT+CGACT? +CGACT: 1,1 80502ST10950A Rev. 14 Page 849 of 1904 2022-03-04 Not Subject to NDA...
Page 850: At+Cgdscont - Define Secondary Pdp Context
LE910Cx AT Commands Reference Guide 3.9.31. AT+CGDSCONT - Define Secondary PDP Context Define secondary PDP Context. [1] 3GPP TS 44.065 [2] 3GPP TS 25.323 [3] RFC1144 [4] RFC2507 [5] RFC3095 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT+CGDSCONT=[<cid>...
Page 851 LE910Cx AT Commands Reference Guide <p_cid> integer a numeric parameter which specifies a particular PDP context definition which has been specified by use of the +CGDCONT command. The parameter is local to the TE-MT interface. The list of permitted values is returned by the test form of the command.
Page 852 LE910Cx AT Commands Reference Guide AT+CGDSCONT=? Test command returns the supported range of values of parameters. 80502ST10950A Rev. 14 Page 852 of 1904 2022-03-04 Not Subject to NDA...
Page 853: At+Cgscontrdp - Secondary Pdp Context Read Dynamic Parameters
LE910Cx AT Commands Reference Guide 3.9.32. AT+CGSCONTRDP - Secondary PDP Context Read Dynamic Parameters This command returns parameters for a given <cid>. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CGSCONTRDP[=<cid>] The execution command returns <p_cid> and <bearer_id> parameters for a given <cid>.
Page 854 LE910Cx AT Commands Reference Guide +CGDCONT command. The parameter is local to the TE-MT interface. <bearer_id> integer identifies the bearer, EPS Bearer in EPS and NSAPI in GPRS. AT+CGSCONTRDP=? The test command returns a list of <cid>s associated with active contexts: +CGSCONTRDP: (list of <cid>s associated with active contexts) Parameters for network-initiated PDP contexts returned as well.
Page 855: At+Cgreg - Gprs Network Registration Status
LE910Cx AT Commands Reference Guide 3.9.33. AT+CGREG - GPRS Network Registration Status Set command controls the presentation of the +CGREG: unsolicited result code 3GPP TS 27.007 3GPP TS 24.008 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT+CGREG=[<mode>] Set command enables/disables the +CGREG: unsolicited result code, and...
Page 856 LE910Cx AT Commands Reference Guide Values: 0 : disable the network registration unsolicited result code 1 : enable the network registration unsolicited result code, and selects the short format 2 : enable the network registration unsolicited result code, and selects the long format (includes the network cell identification data) Unsolicited fields: Name...
Page 857 LE910Cx AT Commands Reference Guide UTRAN E-UTRAN <rac> string routing area code (one byte) in hexadecimal format Routing Area Code when <AcT>=0 or 2 Mobile Management Entity code when <AcT>=7 <lac>, <ci>, <AcT>, and <rac> network information is reported by URC only if <mode>=2, and the module is registered on some network cell.
Page 858: At#Singleapnswitch - Set Apn Param Change
LE910Cx AT Commands Reference Guide 3.9.34. AT#SINGLEAPNSWITCH - set APN param change This command sets APN param change. SIM Presence Setting saved Can be aborted MAX timeout SELINT Required Auto AT#SINGLEAPNSWITCH=<mode> If it is enabled and an APN network identifier or APN-related parameter is updated, Modem can re-activate PDN context with changed APN if there are no application working on the activated PDN context and APN name is changed.
Page 859 LE910Cx AT Commands Reference Guide AT#SINGLEAPNSWITCH? Read command reports current configuration. AT#SINGLEAPNSWITCH=? Test command reports the supported range of values. 80502ST10950A Rev. 14 Page 859 of 1904 2022-03-04 Not Subject to NDA...
Page 860: Sim
LE910Cx AT Commands Reference Guide 3.10.1. AT+CPIN - Enter the PIN The command sends to the device a password which is necessary before it can be operated. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Other AT+CPIN=<pin>[,<newpin>]...
Page 861 LE910Cx AT Commands Reference Guide Parameters: Name Type Default Description <code> string PIN/PUK/PUK2 request status code Values: READY : ME is not pending for any password SIM PIN : ME is waiting SIM PIN to be given SIM PUK : ME is waiting SIM PUK to be given PH-SIM PIN : ME is waiting phone-to-SIM card...
Page 862 LE910Cx AT Commands Reference Guide PH-NET PIN : ME is waiting network personalization password to be given PH-NET PUK : ME is waiting network personalization unblocking password to be given PH-NETSUB PIN : ME is waiting network subset personalization password to be given PH-NETSUB PUK : ME is waiting network subset personalization unblocking...
Page 863 LE910Cx AT Commands Reference Guide AT+CMEE=1 AT+CPIN? +CME ERROR: 10 //error: you have to insert the SIM AT+CPIN? +CPIN: READY //you inserted the SIM and module is not waiting for PIN 80502ST10950A Rev. 14 Page 863 of 1904 2022-03-04 Not Subject to NDA...
Page 864: At+Cpinr - Remaining Pin Retries
LE910Cx AT Commands Reference Guide 3.10.2. AT+CPINR - Remaining PIN Retries This command returns the number of remaining PIN retries for the MT passwords. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CPINR[=[<sel_code>]] Execution command cause the MT to return the number of remaining PIN retries for the MT passwords.
Page 865 LE910Cx AT Commands Reference Guide <code> string type of PIN <retries> integer number of remaining retries per PIN <default_retries> integer number of default/initial retries per PIN AT+CPINR=? Test command returns the OK result code. AT+CPINR="SIM*" +CPINR: SIM PIN,3,3 +CPINR: SIM PUK,10,10 +CPINR: SIM PIN2,0,3 +CPINR: SIM PUK2,2,10 AT+CPINR="*SIM*"...
Page 866: At#Pct - Display Pin Counter
LE910Cx AT Commands Reference Guide 3.10.3. AT#PCT - Display PIN Counter This command reports the PIN/PUK or PIN2/PUK2 input remaining attempts, if +CPIN password is required. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#PCT Execution command reports the PIN/PUK or PIN2/PUK2 input remaining attempts, depending on +CPIN requested password, in the format: #PCT: <n>...
Page 867 LE910Cx AT Commands Reference Guide AT+CPIN? +CPIN: SIM PIN Check PIN remained counter AT#PCT #PCT: 3 Input incorrect PIN number AT+CPIN=1111 +CME ERROR: incorrect password AT#PCT #PCT: 2 80502ST10950A Rev. 14 Page 867 of 1904 2022-03-04 Not Subject to NDA...
Page 868: At+Iccid - Read Iccid
LE910Cx AT Commands Reference Guide 3.10.4. AT+ICCID - Read ICCID Execution command reads on SIM the Integrated Circuit Card Identification (ICCID). It is the card identification number that provides a unique identification number for the SIM. SIM Presence Setting saved Can be aborted MAX timeout SELINT...
Page 869: At+Cimi - International Mobile Subscriber Identity (Imsi)
LE910Cx AT Commands Reference Guide 3.10.5. AT+CIMI - International Mobile Subscriber Identity (IMSI) This command returns the International Mobile Subscriber Identity (IMSI). 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CIMI Execution command returns the value of the International Mobile Subscriber Identity stored in the SIM without command echo.
Page 870: At#Cimi - International Mobile Subscriber Identity (Imsi)
LE910Cx AT Commands Reference Guide 3.10.6. AT#CIMI - International Mobile Subscriber Identity (IMSI) This command returns the International Mobile Subscriber Identity (IMSI). SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT#CIMI Execution command returns the value of the International Mobile Subscriber Identity stored in the SIM with command echo.
Page 871: At+Crsm - Restricted Sim Access
LE910Cx AT Commands Reference Guide 3.10.7. AT+CRSM - Restricted SIM access The command transmits to the UICC some specific commands and their required parameters. 3GPP TS 11.11/51.011 3GPP TS 27.007 ETSI TS 102 221 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required...
Page 872 LE910Cx AT Commands Reference Guide 178 : READ RECORD 192 : GET RESPONSE 214 : UPDATE BINARY 220 : UPDATE RECORD 242 : STATUS <fileId> integer identifier of an elementary data file on SIM. Mandatory for every command except STATUS. <P1>...
Page 873 LE910Cx AT Commands Reference Guide <pathid> string contains the path of an elementary file on the SIM/UICC in hexadecimal format. This shall only be used in the mode "select by path from MF" (e.g. "7F205F70"). Additional info: Response data fields: Name Type Default...
Page 874 LE910Cx AT Commands Reference Guide Use only decimal numbers for parameters <command>, <fileid>, <P1>, <P2> and <P3>. AT+CRSM=? Test command returns the OK result code. 80502ST10950A Rev. 14 Page 874 of 1904 2022-03-04 Not Subject to NDA...
Page 875 LE910Cx AT Commands Reference Guide Read binary, ICCID(2FE2) AT+CRSM=176,12258,0,0,10 +CRSM: 144,0,982850702001107686F4 Read record, ADN(6F3A) AT+CRSM=178,28474,1,4,40 +CRSM: 144,0,42434A554EFFFFFFFFFFFFFFFFFFFFFF06811056789282FFFFFFFFFFFFFF Update Binary, KcGPRS(6F52) AT+CRSM=214,28539,0,0,8,C69018C7958C87 +CRSM: 144,0 Update Record, ADN(6F3A) AT+CRSM=220,28474,9,4,30,657469FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFF FFFFFFFFFFF +CRSM: 144,0 Status, FPLMN(6F7B) AT+CRSM=242,28539 +CRSM:144,0,623C820238218410A0000000871002FFFFFFFF89040300FFA511800131 81030 10A3282011E8304000030E08A01058B032F0609C6099001C0830101830181 Get Response, MSISDN(6F40) AT+CRSM=192,28480 +CRSM: 144,0,621E8205422100260283026F40A5039201008A01058B036F06058002004C8800...
Page 876: At+Csim - Generic Sim Access
LE910Cx AT Commands Reference Guide 3.10.8. AT+CSIM - Generic SIM Access This command sends a generic command to the UICC. [1] 3GPP TS 11.11 [2] 3GPP TS 31.101 [3] 3GPP TS 31.102 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CSIM=<length>,<command>...
Page 877 LE910Cx AT Commands Reference Guide 3GPP TS 51.011 (hexadecimal character format, refer to +CSCS) Additional info: List of the meaning of the response messages parameters. Name Type Default Description <length> integer characters number of the <response> sent to TE (two times the actual length of the response) <response>...
Page 878 LE910Cx AT Commands Reference Guide • 2G SIM, see standard [1]: STATUS AT+CSIM=10,A0F2000016 +CSIM:48,"000002A87F20020000000000099300220800838A838A9000" SELECT EF 6F07 AT+CSIM=14,A0A40000026F07 +CSIM: 4,"9F0F" GET RESPONSE AT+CSIM=10,A0C000000F +CSIM: 34,"000000096F0704001A001A010200009000" SELECT EF 6F30 AT+CSIM=14,A0A40000026F30 +CSIM: 4,"9F0F" READ BINARY AT+CSIM=10,A0B00000FC +CSIM:508,"FFFFFF1300831300901300541300301300651300381300801301801 3000113110913013013009813007713005913004313008113009513014013002313 0016330420130041FFFFFFFFFFFF21436542F41922F28822F201FFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFF9000"...
Page 879: At+Ccho - Open Logical Channel
LE910Cx AT Commands Reference Guide 3.10.9. AT+CCHO - Open Logical Channel Open Logical Channel 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CCHO=<dfname> Execution command causes the MT to return <sessionId> to allow the TE to identify a channel that is being allocated by the currently selected UICC, which is attached to ME.
Page 880 LE910Cx AT Commands Reference Guide Additional info: Response parameter Name Type Default Description <sessionId> integer a session Id to be used in order to target a specific application on the smart card (e.g. (U)SIM, WIM, ISIM) using logical channels mechanism The logical channel number is contained in the CLASS byte of an APDU command, thus implicitly contained in all APDU commands sent to a UICC.
Page 881: At+Cchc - Close Logical Channel
LE910Cx AT Commands Reference Guide 3.10.10. AT+CCHC - Close Logical Channel Close Logical Channel 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CCHC=<sessionId> Execution command asks the ME to close a communication session with the active UICC.
Page 882: At+Cgla - Generic Uicc Logical Channel Access
LE910Cx AT Commands Reference Guide 3.10.11. AT+CGLA - Generic UICC Logical Channel Access This command is used to control the currently selected UICC on the TE. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required AT+CGLA=<sessionId>,<length>,<command>...
Page 883 LE910Cx AT Commands Reference Guide applications on the smart card using a logical channel other than the default channel (channel "0"). <length> integer length of the characters that are sent to TE in <command> (two times the actual length of the command) <command>...
Page 884: At+Cuad - Uicc Application Discovery
LE910Cx AT Commands Reference Guide 3.10.12. AT+CUAD - UICC Application Discovery This command asks the MT to discover what applications are available for selection on the UICC. 3GPP TS 27.007 ETSI TS 102.221 SIM Presence Setting saved Can be aborted MAX timeout SELINT Required...
Page 885 LE910Cx AT Commands Reference Guide AT+CUAD=? Test command returns the OK result code. 80502ST10950A Rev. 14 Page 885 of 1904 2022-03-04 Not Subject to NDA...
Page 886: At#Ccid - Read Iccid
LE910Cx AT Commands Reference Guide 3.10.13. AT#CCID - Read ICCID Execution command reads on SIM the Integrated Circuit Card Identification (ICCID). It is the card identification number that provides a unique identification number for the SIM. SIM Presence Setting saved Can be aborted MAX timeout SELINT...
Page 887: At#Simpr - Sim Presence Status
LE910Cx AT Commands Reference Guide 3.10.14. AT#SIMPR - SIM Presence Status The command enables/disables the SIM presence status unsolicited indication. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT#SIMPR=[<mode>] Set command enables/disables the SIM presence status unsolicited indication in the ME.
Page 888 LE910Cx AT Commands Reference Guide <status> integer current SIM status Values: SIM not inserted SIM inserted Entering AT#SIMPR= returns OK but has no effect. AT#SIMPR? Read command reports whether the unsolicited indication #SIMPR is currently enabled or not, along with the local and remote SIM status, in the format: #SIMPR: <mode>,0,<status><CR><LF>...
Page 889: At#Qss - Query Sim Status
LE910Cx AT Commands Reference Guide 3.10.15. AT#QSS - Query SIM Status Query SIM Status. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT#QSS=[<mode>] Set command enables/disables the Query SIM Status unsolicited indication in the ME. The format of the unsolicited indication is the following: #QSS: <status>...
Page 890 LE910Cx AT Commands Reference Guide <status> integer current SIM status Values: 0 : SIM not inserted 1 : SIM inserted 2 : SIM inserted and PIN unlocked 3 : SIM inserted and READY (SMS and Phonebook access are possible) The command reports the SIM status change after the <mode> has been set to 2.
Page 891: At#Simselect - Sim Slot Switch
LE910Cx AT Commands Reference Guide 3.10.16. AT#SIMSELECT - SIM Slot Switch SIM Slot Switch SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#SIMSELECT=<slot> Set command selects to activate one of the two SIM slots to support Dual SIM Single Standby (DSSS).
Page 892 LE910Cx AT Commands Reference Guide Test command reports the supported range of values for parameter <slot>. 80502ST10950A Rev. 14 Page 892 of 1904 2022-03-04 Not Subject to NDA...
Page 893: At#Rsen - Remote Sim Enable
LE910Cx AT Commands Reference Guide 3.10.17. AT#RSEN - Remote SIM Enable This command used to enable or disable the remote SIM feature. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#RSEN=<mode>[,<sap_format>,<role>,<port>,<beacon>] Set command enables/disables the Remote SIM feature. If the status of the remote SIM changes, then the status is shown with the following URC: #RSEN: <conn>...
Page 894 LE910Cx AT Commands Reference Guide <port> integer mandatory if <mode> is 1 and <sap_format> is 1 Value: 1 : dummy value <beacon> integer retransmission timer of SAP connection request Value: 0÷100 : timer interval in seconds (dummy value) Unsolicited field: Name Type Description...
Page 895 LE910Cx AT Commands Reference Guide This command is not supported in the following models. - LE910C1-SA/SV/ST - LE910C1-EUX/SVX/SAX - LE910Cx-WWX To connect the remote SIM AT#RSEN=1,1,0,1,0 #RSEN: 1 To disconnect the remote SIM AT#RSEN=0 #RSEN: 0 80502ST10950A Rev. 14 Page 895 of 1904 2022-03-04 Not Subject to NDA...
Page 896: At#Ensim2 - Enable Sim Slot2
LE910Cx AT Commands Reference Guide 3.10.18. AT#ENSIM2 - Enable SIM Slot2 This command enables/disables SIM slot2. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#ENSIM2=<mode> Set command enables/disables SIM slot2. Parameter: Name Type Default Description <mode>...
Page 897 LE910Cx AT Commands Reference Guide AT#ENSIM2=? Test command reports the supported range of values for parameter <mode>. 80502ST10950A Rev. 14 Page 897 of 1904 2022-03-04 Not Subject to NDA...
Page 898: At#Hsen - Hot-Swap Enable
LE910Cx AT Commands Reference Guide 3.10.19. AT#HSEN - Hot-Swap Enable This command enables/disables the hot-swap function. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#HSEN=<mode> Set command enables/disables the hot-swap function. Parameter: Name Type Default Description <mode>...
Page 899 LE910Cx AT Commands Reference Guide If SIMIN pin is not connected, the hot-swap function cannot be supported. The changed setting is applied to the next boot. Please set as disable if you want not to use this feature. SIMIN pin is connected and SIM is inserted. AT#HSEN? #HSEN: 1 AT#SIMPR?
Page 900: At#Simincfg - Simin Pin Configuration
LE910Cx AT Commands Reference Guide 3.10.20. AT#SIMINCFG - SIMIN Pin Configuration This command allows to set the SIMIN pin status for SIM detection. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#SIMINCFG=<GPIOPin>,<siminDetMode> Set command sets SIMIN pin status for SIM detection. Parameters: Name Type...
Page 901 LE910Cx AT Commands Reference Guide Test command reports the supported range of value for parameters <GPIOPin> and <siminDetMode>. If SIMIN pin is not connected, the hot-swap function cannot be supported. 80502ST10950A Rev. 14 Page 901 of 1904 2022-03-04 Not Subject to NDA...
Page 902: At#Esimid - Provides The Euicc Id
LE910Cx AT Commands Reference Guide 3.10.21. AT#ESIMID - Provides the EUICC ID This command provides the unique ID number for the eUICC card present in the slot. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#ESIMID=<slot> Set command provides the unique ID number for the eUICC card present in the slot.
Page 903: At#Esimpf - Manage The Profiles
LE910Cx AT Commands Reference Guide 3.10.22. AT#ESIMPF - Manage the profiles This command queries, switches or deletes the profiles supported by the card. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Other AT#ESIMPF=<mode>,<slot>[,<profile_id>[,<enable_profile>]] Set command queries, switches or deletes the profiles supported by the card.
Page 904 LE910Cx AT Commands Reference Guide 3 : profile 3 4 : profile 4 5 : profile 5 6 : profile 6 7 : profile 7 8 : profile 8 <enable_profile> integer Profile enable or not Values: 0 : disable the profile 1 : enable the profile Additional info: If you want queries the profile, only two parameters <mode>...
Page 905 LE910Cx AT Commands Reference Guide If you want switches the profile, all parameters are needed. The return value is OK or ERROR. AT#ESIMPF=? Test command reports the supported range of values for parameters <mode>,<slot>,<profile_id>,<enable_profile> Profile query: AT#ESIMPF=0,1 #ESIMPF: 1,0 #ESIMPF: 2,0 Switches the profile: AT#ESIMPF=1,1,2,1 Deletes the profile:...
Page 906: At#Esimpfinfo - Provides The Profile Data
LE910Cx AT Commands Reference Guide 3.10.23. AT#ESIMPFINFO - Provides the profile data This command provides the profile data for the profile ID. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Other AT#ESIMPFINFO=<slot>,<profile_id> Set command provides the profile data for the profile ID in request. Parameters: Name Type...
Page 907 LE910Cx AT Commands Reference Guide Additional info: Response: #ESIMPFINFO: <iccid>,<profile_state>,<profile_nickname>,<profile_spn>,<profile_name>,<profi le_class>,<profile_rules> Name Type Default Description <iccid> integer Card identification number <profile_state> integer Profile state information Values: 0 : inactive profile 1 : active profile <profile_nickname> string Nickname of profile <profile_spn> string The profile service provider <profile_name>...
Page 908 LE910Cx AT Commands Reference Guide AT#ESIMPFINFO=? Test command reports the supported range of values for parameters <slot>,<profile_id> 80502ST10950A Rev. 14 Page 908 of 1904 2022-03-04 Not Subject to NDA...
Page 909: At#Esimupn - Updates The Nickname
LE910Cx AT Commands Reference Guide 3.10.24. AT#ESIMUPN - Updates the nickname This command updates the nickname of the requested profile. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Other AT#ESIMUPN=<slot>,<profile_id>,<nickname> Set command updates the nickname of the requested profile. If the nickname is missing or has zero length, the nickname is removed from profile.
Page 910 LE910Cx AT Commands Reference Guide 8 : profile 8 <nickname> string Nickname information, supported 0 ~ 64 character string. AT#ESIMUPN=? Test command reports the supported range of values for parameters <slot>,<profile_id>. 80502ST10950A Rev. 14 Page 910 of 1904 2022-03-04 Not Subject to NDA...
Page 911: At#Esimgetaddr - Configures The Default Sm-Dp+ Address
LE910Cx AT Commands Reference Guide 3.10.25. AT#ESIMGETADDR - Configures the default SM-DP+ address This command configures the default SM-DP+ address on the eUICC. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Other AT#ESIMGETADDR=<slot>[,<default_smdp_addr>] Set command configures the default SM-DP+ address on the eUICC. Parameters: Name Type...
Page 912 LE910Cx AT Commands Reference Guide #ESIMGETADDR: <default_smds_address>,<default_smdp_addr> Name Type Default Description <default_smds_address> string default SM-DS address AT#ESIMGETADDR=? Test command reports the supported range of values for parameters <slot>. 80502ST10950A Rev. 14 Page 912 of 1904 2022-03-04 Not Subject to NDA...
Page 913: At#Esimcap - Sets Or Gets The Terminal Capability
LE910Cx AT Commands Reference Guide 3.10.26. AT#ESIMCAP - Sets or gets the terminal capability This command allows the client to set the contents of the TERMINAL CAPABILITY command that is sent to the card as part of card initialization procedure. SIM Presence Setting saved Can be aborted...
Page 914 LE910Cx AT Commands Reference Guide that is sent to the card. When this is set to TRUE, the value field is ignored. Values: 0 : not remove the terminal capability 1 : remove the terminal capability, the value field is ignored Additional info: In case <tag>...
Page 915 LE910Cx AT Commands Reference Guide bit2: 0 - Local Profile Download in the Device (LPDd) not supported 1 - Local Profile Download in the Device (LPDd) supported bit3: 0 - Local Discovery Service in the Device (LDSd) not supported 1 - Local Discovery Service in the Device (LDSd) supported bit4: 0 - LUIe based on SCWS not...
Page 916 LE910Cx AT Commands Reference Guide update only certain tags including. Values: 80 : Terminal power supply 81 : Extended logical channels terminal support 82 : additional interface support 83 : eUICC-related capabilities <value> mixed In case <tag> is '80': <value> - Hex value, within the constructed TLV object.
Page 917 LE910Cx AT Commands Reference Guide Test command reports the supported range of values for parameters <slot>,<tag>,<remove_tlv>. 80502ST10950A Rev. 14 Page 917 of 1904 2022-03-04 Not Subject to NDA...
Page 918: At#Esimpfuc - Provides The User Consent
LE910Cx AT Commands Reference Guide 3.10.27. AT#ESIMPFUC - Provides the user consent This command provides the user consent to the service which is required for proceeding with the profile download/installation operation after receiving a UIM_ADD_PROFILE_IND indication with status set to UIM_PROFILE_USER_CONSENT_REQUIRED.
Page 919 LE910Cx AT Commands Reference Guide Test command reports the supported range of values for parameters <slot>,<user_consent>. 80502ST10950A Rev. 14 Page 919 of 1904 2022-03-04 Not Subject to NDA...
Page 920: At#Esimaddpf - Allows Download A New Profile
LE910Cx AT Commands Reference Guide 3.10.28. AT#ESIMADDPF - Allows download a new profile This command allows the eUICC card to download a new profile based on the activation code and confirmation code provided. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required...
Page 921 LE910Cx AT Commands Reference Guide Indication during profile download: #ESIMADDPF: <slot>,<status>[,<error_cause>,<percentage>,<pp_rule>,<user_consent_neede d>] Unsolicited fields: Name Type Description <slot> integer Slot information <status> integer Indicates the status of profile download and install. Values: 1 : Profile download error 2 : Profile download in progress with download percentage.
Page 922 LE910Cx AT Commands Reference Guide 4 : Profile download error no memory on terminal. 5 : Profile download error unsupported profile class. 6 : Profile download error profile policy rules not allowed. <percentage> integer Percentage of download/installation done. <pp_rule> integer Indicates the profile policy rules for this profile.
Page 923: At#Esimmemrst - Resets The Euicc Card
LE910Cx AT Commands Reference Guide 3.10.29. AT#ESIMMEMRST - Resets the eUICC card This command resets the eUICC card present on given slot based on the provided option. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#ESIMMEMRST=<slot>,<option_1>,<option_2>,<option_3> Set command resets the eUICC card present on given slot based on the provided option.
Page 924 LE910Cx AT Commands Reference Guide Values: 0 : do not action 1 : reset the default SM-DP+ address AT#ESIMMEMRST=? Test command reports the supported range of values for parameters <slot>,<option_1>,<option_2> and <option_3>. 80502ST10950A Rev. 14 Page 924 of 1904 2022-03-04 Not Subject to NDA...
Page 925: At#Vsimsetprof - Set Virtual Sim Profile
LE910Cx AT Commands Reference Guide 3.10.30. AT#VSIMSETPROF - Set Virtual SIM profile This command selects and activates a Virtual SIM profile. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#VSIMSETPROF=<profId>[,<storeNewMode>] Execution command selects and activates a Virtual SIM profile or deactivates the Virtual SIM profile and instructs the device to use the UICC, using the unconditional activation (i.e.
Page 926 LE910Cx AT Commands Reference Guide #VSIMSETPROF=1 returns immediate ERROR in case SIM profile is missing (i.e. #SECT, #SECP operations has not been performed yet). #VSIMSETPROF=0 returns immediate ERROR in case physical SIM is missing. Expect 3 - 4 seconds delay when SIM switch is performed in warm status (module already running) from physical SIM, 2 seconds from virtual SIM.
Page 927: At#Vsimlistprof - List Existing Profiles
LE910Cx AT Commands Reference Guide 3.10.31. AT#VSIMLISTPROF - List existing profiles This command display ICCID list of existing profiles to manage Virtual SIM. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#VSIMLISTPROF Execution command causes the module to list ICCIDs that have been retrieved from the Virtual SIM.
Page 928 LE910Cx AT Commands Reference Guide SET, TEST commands return always immediate ERROR if Virtual SIM application is not present, corrupted or wrong key is present. Can take 3 - 4 s when performed the first time in warm status (module already running) if physical SIM is active, 2 s if virtual is active.
Page 929: At#Simdet - Sim Detection Mode
LE910Cx AT Commands Reference Guide 3.10.32. AT#SIMDET - SIM Detection Mode This command manages the SIM detection mode. [1] Telit Hardware Design Guide of the used module. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#SIMDET=<mode>...
Page 930 LE910Cx AT Commands Reference Guide When #SIMDET=1 (that simulates "SIM Inserted") is issued, a query to detect the presence of the SIM is forced, regardless of SIMIN pin status. If SIM is not responding (for example, because it is not present) then, after a timeout, the modem gives up and sets the SIM status to SIM NOT INSERTED.
Page 931: Sim Toolkit
LE910Cx AT Commands Reference Guide SIM Toolkit 3.11.1. AT#STIA - SIM/USIM Toolkit Interface Action The SIM/USIM Application Toolkit (SAT/USAT) provides an interface to the applications existing in the SIM/USIM device. The module must support the mechanisms required by the SIM/USIM applications. [1] 3GPP TS 23.038 [2] 3GPP TS 31.111 [3] Telit SIM/USIM Application Toolkit Application Note...
Page 932 LE910Cx AT Commands Reference Guide If <mode>=2, the URC format depends on the <cmdType> as described in the Additional info sections. For <cmdType>, and all other URC parameters refer to #STGI command. The <mode> parameter values are listed below. Values: : disable SAT/USAT : enable SAT/USAT without #STN URC : enable SAT/USAT and extended #STN URC...
Page 933 LE910Cx AT Commands Reference Guide meaning of the URC refer to Unsolicited fields section. #STN:<cmdTerminateValue> Value: 1,2 : timeout expressed in minutes Additional info: <mode>=3, the URC has the following reduced format: #STN: <cmdType> <mode>=2, and <cmdType>=1 (REFRESH), the URC has the following extended format: #STN: 1,<refreshType>...
Page 934 LE910Cx AT Commands Reference Guide <cmdType>=20 (SEND DTMF) <cmdType>=32 (PLAY TONE) <cmdType>=64 (OPEN CHANNEL) <cmdType>=65 (CLOSE CHANNEL) <cmdType>=66 (RECEIVE DATA) <cmdType>=67 (SEND DATA) the URC has the following extended format: #STN: <cmdType>[,<alphaIdentifier>] If <cmdType>=19 (SEND SHORT MESSAGE) fails, the #STN: 119 URC is sent to the module.
Page 935 LE910Cx AT Commands Reference Guide one line follows for every item, repeated <numOfItems> times: #STN: 36,<itemId>,<itemText>[,<nextActionId>] <mode>=2, and <cmdType>=37 (SET UP MENU), the URC has the following extended format: the first line of output is: #STN: 37,<cmdDetails>,<numOfItem>,<titleText><CR><LF> one line follows for every item, repeated for <numOfItems>: #STN: 37,<itemId>,<itemText>[,<nextActionId>] <mode>=2, and <cmdType>=40 (SET UP IDLE MODE TEXT), the URC has the following extended format:...
Page 936 LE910Cx AT Commands Reference Guide <cmdTerminateValue> integer is defined as <cmdType> + terminate offset. Terminate offset = 100 <cmdControlResponse> integer response of the SIM/USIM device Values: SMS control response call/SS/USSD response <Result> integer identify the result of the Call or SMS control performed by SIM/USIM device Values: 0 : Call/SMS not allowed...
Page 937 LE910Cx AT Commands Reference Guide A typical SAT/USAT session on AT interface starts after an #STN: 37 unsolicited code is received, if enabled (see above). At that point usually an AT#STGI=37 command is issued (see #STGI), and after the SAT main menu has been displayed on TE an AT#STSR=37,0,x command is issued to select an item in the menu (see #STSR).
Page 938 LE910Cx AT Commands Reference Guide In SAT/USAT applications an SMS message is usually sent to the network provider containing service requests, e.g. to send the latest news. The provider returns a message with the requested information. Before activating SAT/USAT, it is recommended to set the SMS text mode with the AT+CMGF=1 command and enable URC for incoming SMS messages with +CNMI command.
Page 939: At#Stgi - Sim Toolkit Get Information
LE910Cx AT Commands Reference Guide 3.11.2. AT#STGI - SIM Toolkit Get Information This command interfaces to the SIM/USIM Application Toolkit to get information on the ongoing proactive command. 3GPP TS 31.111 Telit SIM/USIM Application Toolkit Application Note SIM Presence Setting saved Can be aborted MAX timeout SELINT...
Page 940 LE910Cx AT Commands Reference Guide 20 : SEND DTMF 32 : PLAY TONE 33 : DISPLAY TEXT 34 : GET INKEY 35 : GET INPUT 36 : SELECT ITEM 37 : SET UP MENU 40 : SET UP IDLE MODE TEXT Additional info: <cmdType>=1 (REFRESH) the response format:...
Page 941 LE910Cx AT Commands Reference Guide 6 : NAA Session Reset 7 : Steering of Roaming 8 : Steering of Roaming WLAN <cmdType>=5 (SET UP EVENT LIST) the response format: #STGI: 5,<eventListMask> Name Type Default Description <eventListMask> identifies the list of events to monitor.
Page 942 LE910Cx AT Commands Reference Guide bit 9 = Data available (if class "e" is supported) bit 10 = Channel status (if class "e" is supported) bits 11 - 15 = reserved for future Value: 0x0001÷0x01FF : mask <cmdType>=16 (SET UP CALL) the response format: #STGI: 16,<cmdDetails>,[<confirmationText>],<calledNumber>...
Page 943 LE910Cx AT Commands Reference Guide <confirmationText> string string for user confirmation stage <calledNumber> string string containing called numbers This section is dedicated to the following proactive commands: <cmdType>=17 (SEND SS) <cmdType>=18 (SEND USSD) <cmdType>=19 (SEND SHORT MESSAGE) <cmdType>=20 (SEND DTMF) <cmdType>=32 (PLAY TONE) the response format: #STGI: <cmdType>[,<alphaIdentifier>]...
Page 944 LE910Cx AT Commands Reference Guide bit 7: 0 - clear message after a delay 1 - wait for user to clear message Value: 0x00÷0xFF : mask <text> string text provided by the SIM/USIM device in ASCII format <cmdType>=34 (GET INKEY) the response format: #STGI: 34,<cmdDetails>,<text>...
Page 945 LE910Cx AT Commands Reference Guide bit 7: 0 - no help information available 1 - help information available Value: 0x00÷0x87 : mask <text> string string as prompt for test <cmdType>=35 (GET INPUT) the response format: #STGI: 35,<cmdDetails>,<text>,<responseMin>,<responseMax>[,<defaultText>] Name Type Default Description <cmdDetails>...
Page 946 LE910Cx AT Commands Reference Guide format 1 - user input to be in SMS packed format bits 4-6: bit 7: 0 - no help information available 1 - help information available Value: 0x00÷0x8F : mask <text> string string as prompt for text <responseMin>...
Page 947 LE910Cx AT Commands Reference Guide Name Type Default Description <cmdDetails> a bit mask where each bit position, according to its value, has a specific meaning: bit 0: 0 - presentation type is not specified 1 - presentation type is specified in bit 1 bit 1: 0 - presentation as a choice of...
Page 948 LE910Cx AT Commands Reference Guide <itemText> string item title string <nextActionId> integer is the code of next proactive command to be issued upon execution of the menu item. If <nextActionId>=0, no next action information available. <cmdType>=37 (SET UP MENU) the response format: the first line of output is: #STGI: 37,<cmdDetails>,<numOfItem>,<titleText><CR><LF>...
Page 949 LE910Cx AT Commands Reference Guide <titleText> string menu title string <itemId> integer item identifier Value: 1÷numOfItems : item identifier range <itemText> string item title <nextActionId> integer numerical code of next proactive command type to be issued upon execution of the menu item. If <nextActionId>=0, no next action information available.
Page 950 LE910Cx AT Commands Reference Guide Read command returns the ongoing proactive command and the SAT/USAT state. The message format is: #STGI: <state>,<cmdType> Additional info: Returned parameters: Name Type Default Description <state> integer state of the sending of the SET UP MENU proactive command (37), refer to AT#STIA? command <cmdType>...
Page 951: At#Stsr - Sim Toolkit Send Response
LE910Cx AT Commands Reference Guide 3.11.3. AT#STSR - SIM Toolkit Send Response This command allows the user to provide a response to confirm the execution of the ongoing proactive command. 3GPP TS 31.111 Telit SIM/USIM Toolkit Application Note SIM Presence Setting saved Can be aborted MAX timeout...
Page 952 LE910Cx AT Commands Reference Guide 20 : USSD/SS Transaction terminated by user 32 : TA currently unable to process command 34 : user has denied SIM/USIM call setup request 35 : user cleared down SIM/USIM call before connection or network release <data>...
Page 953 LE910Cx AT Commands Reference Guide <cmdType>=36 (SELECT ITEM). <data> contains the item identifier selected by the user. <userAction>=0 is used, for example, to - accept a call when the ongoing proactive command is SET UP CALL, <cmdType>=16 - start a connection when the ongoing proactive command is OPEN CHANNEL, <cmdType>=64 Use of icons is not supported.
Page 954 LE910Cx AT Commands Reference Guide <cmdType> integer proactive command code, refer to #STGI command to have information on the <cmdType> AT#STSR=? Test command returns the range for the parameters <state> and <cmdType>. 80502ST10950A Rev. 14 Page 954 of 1904 2022-03-04 Not Subject to NDA...
Page 955: At#Sdm - Set Sim Toolkit Display Mode
LE910Cx AT Commands Reference Guide 3.11.4. AT#SDM - Set SIM Toolkit Display Mode This command is used to set normal/high priority standby display mode. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#SDM=<priority> Set command sets to normal/high priority standby display mode. Parameter: Name Type...
Page 956: At#Stkenv - Send Sim Toolkit Envelop Command
LE910Cx AT Commands Reference Guide 3.11.5. AT#STKENV - Send SIM Toolkit Envelop Command This command is used to send Envelope command to the UICC when the UE has successfully accepted the list of events of SIM application toolkit. SIM Presence Setting saved Can be aborted MAX timeout...
Page 957: At#Stime - Set Sim Toolkit Timeout Value
LE910Cx AT Commands Reference Guide 3.11.6. AT#STIME - Set SIM Toolkit timeout value This command sets the timeout value for STK timeout test of GCF/PTCRB. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#STIME=[<mode>] Set command sets a unit of STK timeout value. Parameter: Name Type...
Page 958 LE910Cx AT Commands Reference Guide Set STK timeout value to a second unit. AT#STIME=1 Timeout value is 30 second AT#STIA=2,30 Set STK timeout value to a minute unit. AT#STIME=0 Timeout value is 1 minute AT#STIA=2,1 80502ST10950A Rev. 14 Page 958 of 1904 2022-03-04 Not Subject to NDA...
Page 959: Audio
LE910Cx AT Commands Reference Guide Audio 3.12.1. Audio Basic Configuration 3.12.1.1. AT+CALM - Alert Sound Mode This command is used to select the general alert sound mode of the device. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Common...
Page 960 LE910Cx AT Commands Reference Guide If silent mode is selected then incoming calls will not produce alerting sounds but only the unsolicited messages RING or +CRING. AT+CALM? Read command returns the current value of parameter <mode>. AT+CALM=? Test command returns supported values as compound value. 80502ST10950A Rev.
Page 961: At+Crsl - Ringer Sound Level
LE910Cx AT Commands Reference Guide 3.12.1.2. AT+CRSL - Ringer Sound Level This command is used to select the incoming call ringer sound level of the device. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Common Not required profile AT+CRSL=<level>...
Page 962 LE910Cx AT Commands Reference Guide +CRSL: <level> AT+CRSL=? Test command reports <level> supported values as compound value. +CRSL: (0-4) 80502ST10950A Rev. 14 Page 962 of 1904 2022-03-04 Not Subject to NDA...
Page 963: At+Clvl - Loudspeaker Volume Level
LE910Cx AT Commands Reference Guide 3.12.1.3. AT+CLVL - Loudspeaker Volume Level This command allows to set the volume of internal loudspeaker audio output. 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Common Not required profile AT+CLVLthe value of max can be read by issuing the Test command Set command is used to select the volume of the internal loudspeaker audio output of the device.
Page 964: At+Cmut - Microphone Mute Control
LE910Cx AT Commands Reference Guide 3.12.1.4. AT+CMUT - Microphone Mute Control This command enables/disables the muting of the microphone audio line during a voice call. • 3GPP TS 27.007 SIM Presence Setting saved Can be aborted MAX timeout SELINT Common Not required profile AT+CMUT=<n>...
Page 965 LE910Cx AT Commands Reference Guide Read command reports whether the muting of the microphone audio line during a voice call is enabled or not, in the format: +CMUT: <n> AT+CMUT=? Test command reports the supported values for <n> parameter. 80502ST10950A Rev. 14 Page 965 of 1904 2022-03-04 Not Subject to NDA...
Page 966: At+Csil - Silence Command
LE910Cx AT Commands Reference Guide 3.12.1.5. AT+CSIL - Silence Command This command enables the silent mode. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Specific profile AT+CSIL=[<n>] Set command enables/disables the silent mode. When the phone is in silent mode, all signalling tones from MT are suppressed.
Page 967: At#Cap - Change Audio Path
LE910Cx AT Commands Reference Guide 3.12.1.6. AT#CAP - Change Audio Path Change physical audio path. It has no effect and is included only for backward compatibility. • Telit Modules Software User Guide 2G/3G/4G SIM Presence Setting saved Can be aborted MAX timeout SELINT Common...
Page 968 LE910Cx AT Commands Reference Guide - The command works only for Analog mode (#DVI = 0) - The audio path is mutually exclusive, enabling one disables the other. - When changing the audio path, the volume level is set at the previously stored value for that audio path (see +CLVL).
Page 969: At#Srp - Select Ringer Path
LE910Cx AT Commands Reference Guide 3.12.1.7. AT#SRP - Select Ringer Path This command has no effect and is included only for backward compatibility. SIM Presence Setting saved Can be aborted MAX timeout SELINT Common Not required profile AT#SRP=[<n>] Parameter: Name Type Default Description...
Page 970: At#Shfsd - Handsfree Sidetone Set
LE910Cx AT Commands Reference Guide 3.12.1.8. AT#SHFSD - Handsfree Sidetone Set The command purpose is to enable/disable sidetone feature on audio Handsfree path and change the gain level. SIM Presence Setting saved Can be aborted MAX timeout SELINT Common Not required profile AT#SHFSD=[<mode>[,<gain_level>]] Set command enables/disables the sidetone on Handsfree audio output...
Page 971 LE910Cx AT Commands Reference Guide Read command reports whether the handsfree sidetone is currently enabled or not, and current gain level in the format: #SHFSD: <mode>,<gain_level> AT#SHFSD=? Test command returns the supported range of values of parameter <mode> and <gain_level>. 80502ST10950A Rev.
Page 972: At#Shssd - Set Handset Sidetone
LE910Cx AT Commands Reference Guide 3.12.1.9. AT#SHSSD - Set Handset Sidetone This command enables the sidetone on headset audio output and change the gain level. SIM Presence Setting saved Can be aborted MAX timeout SELINT Common Not required profile AT#SHSSD=[<mode>[,<gain_level>]] Set command enables/disables the sidetone on Headset audio output and change the gain level.
Page 973 LE910Cx AT Commands Reference Guide Read command reports whether the Headset sidetone is currently enabled or not, and current gain level in the format: #SHSSD: <mode>,<gain_level> AT#SHSSD=? Test command returns the supported range of values of parameter <mode> and <gain_level>. 80502ST10950A Rev.
Page 974: At#Spkmut - Speaker Mute Control
LE910Cx AT Commands Reference Guide 3.12.1.10. AT#SPKMUT - Speaker Mute Control This command enables/disables the global muting of the speaker audio line. SIM Presence Setting saved Can be aborted MAX timeout SELINT Common Not required profile AT#SPKMUT=<n> Set command enables/disables the global muting of the speaker audio line, for every audio output (ring, incoming sms, voice, Network coverage).
Page 975 LE910Cx AT Commands Reference Guide #SPKMUT: <n> AT#SPKMUT=? Test command reports the supported values for <n> parameter. The setting is saved in NVM using the &W command. 80502ST10950A Rev. 14 Page 975 of 1904 2022-03-04 Not Subject to NDA...
Page 976: At#Oap - Open Audio Loop
LE910Cx AT Commands Reference Guide 3.12.1.11. AT#OAP - Open Audio Loop This set command enables/disables the Open Audio Path. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#OAP=[<mode>] Parameter: Name Type Default Description <mode> integer enables/disables the Open Audio Path Values: 0 : disable 1 : enable...
Page 977 LE910Cx AT Commands Reference Guide AT#OAP=? Test command returns the supported values of parameter <mode>. The audio loop is established between microphone and speaker using sidetone scaling value. #OAP is intended for testing purposes only. Thus, care must be taken to ensure that during the command execution no other audio interacting commands are issued.
Page 978: At#Srs - Select Ringer Sound
LE910Cx AT Commands Reference Guide 3.12.1.12. AT#SRS - Select Ringer Sound Set command sets the ringer tone. SIM Presence Setting saved Can be aborted MAX timeout SELINT Common Not required profile AT#SRS=[<n>,<tout>] Parameters: Name Type Default Description <n> integer ringing tone Values: : current ringing tone 1÷max : ringing tone number, where max can be read by...
Page 979 LE910Cx AT Commands Reference Guide - When the command is issued with <n> > 0 and <tout> > 0, the <n> ringing tone is played for <tout> seconds and stored as default ringing tone. - If command is issued with <n> > 0 and <tout> = 0, the playing of the ringing is stopped (if present) and <n>...
Page 980 LE910Cx AT Commands Reference Guide 1 : currently playing AT#SRS=? Test command reports the supported values for the parameters <n> and <tout> 80502ST10950A Rev. 14 Page 980 of 1904 2022-03-04 Not Subject to NDA...
Page 981: At#Srsext - Select Ringer Sound Extended
LE910Cx AT Commands Reference Guide 3.12.1.13. AT#SRSEXT - Select Ringer Sound Extended This command used to set the specific ring sound from file system. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#SRSEXT=<mode>[,<file_name>] Set command sets the specific ring sound from file system. Parameters: Name Type...
Page 982 LE910Cx AT Commands Reference Guide Read command reports current selected ringing and its status in the form: #SRSEXT: <mode>,<file_name> where: <mode> - ringing tone mode <file_name> - file name. AT#SRSEXT=? Test command reports the supported values for the parameters <mode> and <file_name>.
Page 983: At#Hsgs - Headset Gpio Select
LE910Cx AT Commands Reference Guide 3.12.1.14. AT#HSGS - Headset GPIO Select This command used to select the headset GPIO for headset detect. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required Auto AT#HSGS=<n> Set command select the headset GPIO for headset detect. Parameter: Name Type...
Page 984 LE910Cx AT Commands Reference Guide <status> - 1 - Not connected (Logic 'L' voltage level) 2 - Connected (Logic 'H' voltage level) AT#HSGS=? Test command returns the supported range of values of parameter <n>. 80502ST10950A Rev. 14 Page 984 of 1904 2022-03-04 Not Subject to NDA...
Page 985: At#Hfrecg - Handsfree Receiver Gain
LE910Cx AT Commands Reference Guide 3.12.1.15. AT#HFRECG - Handsfree Receiver Gain Handsfree Receiver Gain SIM Presence Setting saved Can be aborted MAX timeout SELINT Common Not required profile AT#HFRECG=<level> Set the handsfree analogue output gain Parameter: Name Type Default Description <level>...
Page 986 LE910Cx AT Commands Reference Guide Returns the supported range of values of parameter <level>. 80502ST10950A Rev. 14 Page 986 of 1904 2022-03-04 Not Subject to NDA...
Page 987: At#Hsmicg - Handset Microphone Gain
LE910Cx AT Commands Reference Guide 3.12.1.16. AT#HSMICG - Handset Microphone Gain This command has no effect and is included only for backward compatibility. SIM Presence Setting saved Can be aborted MAX timeout SELINT Common Not required profile AT#HSMICG=[<level>] Set command sets the handset microphone input gain. Parameter: Name Type...
Page 988 LE910Cx AT Commands Reference Guide The setting is saved using the &W command. The setting is saved using the &W command. Analog and digital audio are supported. 80502ST10950A Rev. 14 Page 988 of 1904 2022-03-04 Not Subject to NDA...
Page 989: At#Hsrecg - Handset Receiver Gain
LE910Cx AT Commands Reference Guide 3.12.1.17. AT#HSRECG - Handset Receiver Gain This command has no effect and is included only for backward compatibility. SIM Presence Setting saved Can be aborted MAX timeout SELINT Common Not required profile AT#HSRECG=<level> Set handset analogue output gain Parameter: Name Type...
Page 990 LE910Cx AT Commands Reference Guide The setting is saved using the &W command. 80502ST10950A Rev. 14 Page 990 of 1904 2022-03-04 Not Subject to NDA...
Page 991: At#Hfmicg - Handsfree Microphone Gain
LE910Cx AT Commands Reference Guide 3.12.1.18. AT#HFMICG - Handsfree Microphone Gain Handsfree Microphone Gain SIM Presence Setting saved Can be aborted MAX timeout SELINT Common Not required profile AT#HFMICG=[<level>] Set the handsfree analogue microphone input gain Parameter: Name Type Default Description <level>...
Page 992: Tones Configuration
LE910Cx AT Commands Reference Guide 3.12.2. Tones configuration 3.12.2.1. AT#STM - Signaling Tones Mode This command enables/disables the signaling tones output on the audio path SIM Presence Setting saved Can be aborted MAX timeout SELINT Common Not required profile AT#STM=[<mode>] Set command enables/disables the signalling tones output on the audio path selected with #SRP command (LE910x supported by fix SRP only).
Page 993 LE910Cx AT Commands Reference Guide #STM: <mode> AT#STM=? Test command reports supported range of values for parameter <mode> The setting is saved in NVM using the &W command. 80502ST10950A Rev. 14 Page 993 of 1904 2022-03-04 Not Subject to NDA...
Page 994: At#Tone - Tone Playback
LE910Cx AT Commands Reference Guide 3.12.2.2. AT#TONE - Tone Playback This command allows the playback of either a single DTMF tone or a dial tone for a specified period of time. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#TONE=<tone>[,<duration>]...
Page 995 LE910Cx AT Commands Reference Guide • #TONE return Error, when play an audio file(#APLAY) and record an audio file(#ARECD) and play ringer sound(#SRS,ringer,ringback tone) For LE910C1-EUX/SAX/SVX and LE910Cx-WWX product: • Not support Y tone AT#TONE=? Test command returns the supported range of values for parameters <tone>...
Page 996: At#Tsvol - Tone Classes Volume
LE910Cx AT Commands Reference Guide 3.12.2.3. AT#TSVOL - Tone Classes Volume This command is used to manage the tone classes volume selection. SIM Presence Setting saved Can be aborted MAX timeout SELINT Common Not required profile AT#TSVOL=<class>,<mode>[,<volume>] Set command is used to select the volume mode for one or more tone classes.
Page 997 LE910Cx AT Commands Reference Guide Values: 0 : default volume is used 1 : The volume <volume> is used <volume> string volume to be applied to the set of classes of tones represented by <class>; it is mandatory if <mode> is 1. Value: 1÷max : the value of max can be read issuing the Test command AT#TSVOL=?
Page 998 LE910Cx AT Commands Reference Guide no info is returned for class 128. AT#TSVOL=? Test command returns the supported range of values of parameters <class>, <mode> and <volume>. • AT#TSVOL=84,1,5 • AT#TSVOL? #TSVOL: 1,0 # TSVOL: 2,0 # TSVOL: 4,1,5 # TSVOL: 8,0 # TSVOL: 16,1,5 # TSVOL: 32,0 #TSVOL: 64,1,5...
Page 999: At#Smsvol - Sms Notification Volume
LE910Cx AT Commands Reference Guide 3.12.2.4. AT#SMSVOL - SMS notification volume This command allows to set the volume of SMS notification. SIM Presence Setting saved Can be aborted MAX timeout SELINT Not required AT#SMSVOL=<level> Set command is used to select the volume of the SMS notification. Parameter: Name Type...
Page 1000 LE910Cx AT Commands Reference Guide 80502ST10950A Rev. 14 Page 1000 of 1904 2022-03-04 Not Subject to NDA...

This manual is also suitable for:

Le910c1

Save PDF