Confirm Firmware Installation For Dfx-2Rp Platforms - Xilinx Alveo U200 Getting Started

To confirm your card is setup correctly to run applications, run the following command and
visually compare the 'Platform' and 'SC Version' entries under Flashable partitions
running on FPGA and Flashable partitions installed in system and confirm
they match. See
$ sudo /opt/xilinx/xrt/bin/xbmgmt examine --device <management BDF>
In the following example output, the platform (xilinx_u200_gen3x16_xdma_base_1) and SC
Version (4.6.18) displayed under Flashable partitions running on FPGA and
Flashable partitions installed in system both match.
-----------------------------------------------------
1/1 [0000:82:00.0] : xilinx_u200_gen3x16_xdma_base_1
-----------------------------------------------------
Flash properties
Type
Serial Number
Device properties
Type
Name
Config Mode
Max Power
Flashable partitions running on FPGA
Platform
SC Version
Platform UUID
Interface UUID
Flashable partitions installed in system
Platform
SC Version
Platform UUID
Mac Address
If the SC version does not match under Flashable partitions running on FPGA and
Flashable partitions installed in system, the SC will need to be flashed. See
versions do not match
Confirm Firmware Installation for DFX-2RP
Platforms
When a card has successfully been installed and the firmware has been updated, both entries for
Platform and SC version installed on the card and the system must match. If they do not match,
the system will be unable to correctly run applications on your card.
UG1301 (v2.2) August 19, 2022
Getting Started with Alveo Accelerator Cards
Displaying Card BDF Values
: spi
: 2130048BF01P
: u200
: AU200P64G
: 7
: 225W
: xilinx_u200_gen3x16_xdma_base_1
: 4.6.18
: A2D4F3CF-5B7A-0B7B-70F9-DA589CB5B3CD
: 15FB8DA1-F552-A9F9-23DE-6DC54AA8968F
: xilinx_u200_gen3x16_xdma_base_1
: 4.6.18
: A2D4F3CF-5B7A-0B7B-70F9-DA589CB5B3CD
: 00:0A:35:05:EB:58
: 00:0A:35:05:EB:59
: 00:0A:35:05:EB:5A
: 00:0A:35:05:EB:5B
to update the SC version on the card.
Chapter 5: Card Bring-Up and Validation
to obtain the device management BDF.
Send Feedback
SC
www.xilinx.com
29