Silent Charging; Setting The Advisory Tone - Yealink W70B User Manual

Procedure
1. Go to OK > Settings > Audio > Ring Tones > Melodies.
On the CP930W, go to Menu > Settings > Basic Settings > Sound > Ring Tones.
On the CP935W, go to More > Basic > Sound > Ring Tones > Common.
On the DD phone, go to Menu > Basic Settings > Sound > Ring Tones > Common.
2. Select the desired ring tone for a specific line.
The ring tone is played automatically.
3. Confirm the action.

Silent Charging

You can enter silent mode when the handset is charging. When you exit charging, return to the volume
before charging. It is not applicable to DD phones/CP935W.
Procedure
1. Go to OK > Settings > Audio.
On the CP930W, go to Menu > Settings > Basic Settings > Sound.
2. Press Change to select the Silent Charging check box.

Setting the Advisory Tone

Advisory tones are the acoustic signals of your handset, which inform you of different actions and states. It
is not applicable to DD phones.
About this task
You can configure the following advisory tones independently:
• Keypad Tone: plays when you press any key on the keypad. It is not applicable to CP935W.
• Key Tone: plays when you use the dialpad. It is only applicable to CP935W.
• Touch Tone: plays when you tap the keys (except the touch keypad). It is only applicable to CP930W/
CP935W.
• Confirmation: plays when a setting is changed or the handset is placed in the charger cradle. It is not
applicable to CP935W.
Low Battery: plays when the battery's remaining capacity is low and the handset needs charging.
•
Note: If the silent mode is activated, the advisory tones will not play, but you can still see the
alert of low battery on the phone screen.
Procedure
1. Go to OK > Settings > Audio > Advisory Tones.
On the CP930W, go to Menu > Settings > Basic Settings > Sound > Advisory Tones.
On the CP935W, go to More > Basic > Sound > Advisory Tone.
2. Select the desired value from the Keypad Tone field.
On the CP935W, select the desired value from the Key Tone field.
3. On the CP930W/CP935W, select the desired value from the Touch Tone field.
| Audio Settings | 100