7. VTR ADJUSTMENT PROCEDURE
Be sure to save the VTR adjustment data into the Personal Computer, before performing adjustment.
Perform the all PC-EVR adjustments, by referring to procedures on PC screen.
7-1. Sensitivity adj of Tape sensors Adjustment (AUTO)
This adjustment is automatically executed.
1. Open the REC Inhibit Tab (SAVE side) of Tape End/Beg. Sensor Cassette (VFK1217).
2. Insert the Tape End/Beg. Sensor Cassette (VFK1217) into the camera recorder.
3. Open the "Video adjustment menu".
4. Select "1. Sensitivity adj of Tape sensors (Auto)" in the Video adjustment menu, and then press the "Enter"
key.
5. Set to CAMERA mode in camera recorder following the message "Auto / Manually set to CAMERA mode.",
and then press the "Enter" key.
PRESS ENTER KEY.
Unnecessary open the door, PRESS ENTER KEY.
In case of the "Tape END / Beg. Sensor cassette
(VFK1217)" is already inserted, PRESS ENTER
KEY.
ELE-35