Panasonic AG-DVC30P Service Manual page 53

13. Removal of EVF Unit
1. Removal of MIC Case Unit.
2. Removal of Side Case R Unit.
3. Removal of TOP VF Unit.
4. Disconnect connector P1 on EVF CONNECT C.B.A. as shown in figure 13-1.
5. Unscrew the 4 screws (A) and remove the EVF Unit and EVF SLIDER Unit from EVF LCD HOLD Unit as
shown in figure 13-2.
6. Unscrew the 3 screws (B) and remove the EVF SLIDE COVER as shown in figure 13-3.
7. Unscrew the 4 screws (C) and remove the EVF Unit from EVF SLIDER Unit as shown in figure 13-4.
Figure 13-1
Lift up EVF
Slide to EVF
SCREW (B)
Figure 13-3
TOP VF UNIT
P1
EVF SLIDE COVER
SCREW (B)
EVF SLIDE UNIT
SCREW (C)
SCREW (C)
DIS-13
SCREW (A)
EVF LCD HOLDER UNIT
FPC
EVF SLIDE UNIT
EVF UNIT
Figure 13-2
Figure 13-4
FPC
EVF UNIT