Wolfbox G850 Instruction Manual

Wolfbox G850 Instruction Manual

Mirror dash cam
Hide thumbs Also See for G850:

Advertisement

Mirror Dash Cam G850
Instruction Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G850 and is the answer not in the manual?

Questions and answers

Mark Kevin Dake
March 4, 2025

I thought I locked a video but can't find it anywhere in the files

1 comments:
Mr. Anderson
March 4, 2025

The Wolfbox G850 automatically locks certain videos, such as timelapse recordings in parking mode. To find a locked video, follow these steps:

1. Access the Device Menu – Use the touchscreen to navigate the settings on the Wolfbox G850.
2. Go to the Video Playback Section – Locate the folder or section that stores recorded videos.
3. Look for the Locked Video Folder – Locked videos are usually stored in a separate folder labeled as "Locked" or "Emergency."
4. Select and View the Video – Browse through the locked videos to find the one you need.

Alternatively, if using a computer or the WOLFBOX app:
- Insert the SD card into a computer and check for a folder named "Locked" or "Event."
- Connect the G850 to the WOLFBOX app and browse the saved recordings.

This answer is automatically generated

Jim Stecker
March 9, 2025

Connecting directly to my fusebox on a 2011 ford fusion- 7.5a fuse place. Using an "add a circuit fuse box addon to connect" to add second fuse for the dashcam. I have 12v coming out of this but does not power up the unit. Have a solid ground. Assuming it doesn't take more than 7.5a to run? The unit works fine off the cigarette lighter but that is always on. Suggestions?

1 comments:
Mr. Anderson
March 9, 2025

The Wolfbox G850 dash cam may not power on properly when connected to a 7.5A fuse in a 2011 Ford Fusion using an add-a-circuit fuse box due to several possible reasons:

1. Insufficient Power Supply – The dash cam may require a more stable power source. A 7.5A fuse may not provide enough continuous power, especially if other components share the circuit.

2. Incorrect Wiring – If the add-a-circuit is not installed correctly, the dash cam may not receive the proper voltage. Ensure the power and ground connections are secure.

3. Fuse Type Compatibility – Some fuse types or positions in the fuse box may not be suitable for powering external devices. Check if the selected fuse slot provides constant or switched power as needed.

4. Hardwire Kit Issues – If using a hardwire kit, ensure it is properly installed and compatible with the dash cam.

5. Dash Cam Malfunction – If the dash cam freezes, restarts, or doesn't turn on, troubleshooting steps from the manual should be followed.

If installation issues persist, contacting Wolfbox support for wiring assistance may help resolve the problem.

This answer is automatically generated

Phu Nguyen
March 27, 2025

The time zone doesn't say PT or ET

1 comments:
Mr. Anderson
March 27, 2025

The Wolfbox G850 allows users to set their time zone manually. It can automatically set the time using GPS, but users must specify their current time zone for accurate time display. If daylight savings time applies, it can be enabled or disabled to adjust the time accordingly.

This answer is automatically generated

Summary of Contents for Wolfbox G850

  • Page 1 Mirror Dash Cam G850 Instruction Manual...
  • Page 2: Table Of Contents

    ………………………………………… Product Overview ………………………………………… Product Specifications ………………………………………… Precautions ………………………………………… Warnings ………………………………………… Getting started ………………………………………… Package Contents ………………………………………… Appearance ………………………………………… About the Micro-SD card ………………………………………… Installation ………………………………………… Power On/Off ………………………………………… Menu Settings ………………………………………… Video Playback on PC ………………………………………… Troubleshooting...
  • Page 3: Product Overview

    Engineers who are committed to building a reliable and trustworthy automotive supplies brand We have been selling G840S(the 1080P model) for about 3 years,According to the different opinions of customers, we have developed this model-G850, the resolution of front camera improved to 4K. Thank you for your continued support.
  • Page 4: Precautions

    > Support Pre-cautions If you have any questions or want accessories, Please CONTACT US (service@wolfbox.com), we will solve it for you and send you the accessories. Please read this manual carefully before using or installing the camera. Plug in the camera before installing it and verify its functionality, especially if you hire a professional to install it.
  • Page 5: Warnings

    If you use micro SD card capacity > 32GB, Please change micro SD card [Class10 (10MB/ sec) required] format to FAT 32 on PC (a 32GB card is inciuded in the package ). If you want 24H parking monitor function to guide your car parking safety, dedicated hardwire-kit(ASIN:B09X1L1GMX ) is needed.
  • Page 6 If this product is damaged or malfunctions, stop using it immediately and consult your dealer. Continued use may cause fire, electric shock or vehicle failure. If the location or use of the camera interferes with driving, please do not install it. This may cause an accident.
  • Page 7: Getting Started

    If the driving recorder is faulty or has a black screen during use, please be sure to contact us or go to a professional store for repair, please do not repair it yourself, otherwise the seller will not be responsible for the consequences. Do not use the charger if the cord is broken or damaged.
  • Page 8 Micro-SD card up to 128 GB for reliable operation. (32G-Memory card is included in the package) Before the G850 starts running, please check the SD card and format it to ensure the smooth operation of the mirror dash cam.
  • Page 9: Package Contents

    PACKAGE CONTENTS Tip: In addition to the original accessories in the package, we also provide separate Hardwire-Kit (used for parking monitor-ing and replacement of car chargers), rear 1* 4K 1* 1080P Mirror Dash Cam 1* GPS Rear Camera camera extension cable (approximately 10m long),and the rear camera mounting bracket in the car (you can use this to install the rear camera in the car).
  • Page 10: Appearance

    Appearance Name Description Front lens, record the front image of the lens The machine can be fixed with 2 straps Fasteners When the machine failure cannot be Reset hole eliminated, you can try to restart the machine by clicking here Port for charging Port used to connect the rear lens AV-IN...
  • Page 11 Recording status: During normal recording,it is red, turns Rear view/Front view switchable: Switch between front yellow while emergency recording view & rear view one moment Emergency Lock: Lock videos as event files so it won't be Click on it, the clock setting appears on the screen overwritten by loop recording GPS Status: Once gps antenna connected, the GPS icon The recording duration of each video, you can set 1min,...
  • Page 12: About The Micro-Sd Card

    About the Micro SD Card When using a new MicroSD card, be sure to format it in the dash cam. Do not remove or insert a Micro SD card while the power is on. Use a Micro SD card with Class 10 or higher(32GB-128GB). We Recommend 64GB SAMSUNG Class 10, U3 Speed Micro-SD Card.
  • Page 13: Installation

    SD card insertion and removal Make sure the dash cam is off when inserting or removing the SD card. Please press the SD card with your fingernail and you will hear a Click sound. This will keep the SD card stuck in the slot. Please note the insertion direction of the SD card.
  • Page 14 Host installation Step 1: Piace the host on the rear-view mirror by hand, be sure to separate the silicone brackets on both sides of the rear-view mirror Step 2: Buckle the product in the rearview mirror by silicone button...
  • Page 15 Step 3: Adjust the front lens to the right position Rear camera installation...
  • Page 16 NOTE: We recommend installing the rear camera outside the car, the effect inside the car is far worse than outside the car. If your car is an RV or a pickup truck, you can install the rear camera forward, turn on the"mirror flip of rear image"and turn off the "Upside down of rear image"to adjust the image.
  • Page 17 2. Remove the panel Remove the inside panel of the trunk to expose the car's rear wiring room. pop up your trunk and look for a solid interior panel that covers the other side of the license plate mount area. Then, insert a trim removal tool or other thin device behind the panel and pry it open.
  • Page 18 4. Connect the rear lens power cord to the extension cord Connect the power cord to the rear camera extension cord after plugging in the rear camera extension cord. 5. Connect the red line with Reversing control line Reversing control lines are usually located at the rear of the car, although their position may vary, so be sure to refer to the car's manual, use pliers or a wire stripper to strip the rubber and expose live...
  • Page 19 6. Connect the power cord of the rear camera to the front of the car If desired, use the trim tool to pop the windshield panel directly above the windshield. Then, pass the cable through the exposed chamber. 7. Connect the car charger to the charger adapter to supply power for the dash cam...
  • Page 20 CAUTION: Connect the cigar plug cord connector in the correct orientation. Connecting in the wrong direction may cause malfunction or damage. If you cannot connect successfully, check the connection part carefully before connecting. 8. Ignite the car and light the dash cam...
  • Page 21 How to install the GPS GPS front and back Installation location...
  • Page 22 Considering the use effect and installation convenience, we usually recommended customers to install it at the position specified in the picture. Of course, you can also try to install it in other locations for testing, and choose the location you think is most suitable. Installing step 1.
  • Page 23 2. Once the GPS is installed, the GPS icon on the home screen will show. After the GPS signal has been received, it will show direction and speed. Q: Why is my GPS not working? /How to use GPS ? A: If you cannot receive the signal after inserting the GPS, please follow the steps below.
  • Page 24 Hardwire Kit Installation Dedicated Hardware Kit ASIN: B09X1L1GMX Step: 1. Stop the engine. 2. Open the fuse box. 3. Use a power detector to detect the constant power and ACC power (emergency power). *note: Use an ACC power supply of 15A to 25A.Use a constant power supply below 30A. 4.
  • Page 25 Yellow cable (BATT/B+) The yellow cable should be connected to the fuse of the constant power supply in the car fuse box. If you are looking for a constant power supply in the fuse box: Use a voltage tester to check the fuse to ensure it still have electricity even if the car engine is off.
  • Page 26: Power On/Off

    NOTE: If you can't install it, please CONTACT US, you can send us a photo of your fuse box, and we have professional technicians who can help you wire it. Power ON/OFF If you turn on the engine (ACC on) while the cigar power adapter is connected,the power will be turned on automatically and the opening screen will be displayed.
  • Page 27 Swip the left/right screen up and down to adjust the angle of view. Swipe left or right to switch between front and rear cameras. Click the top of the screen,to adjust the brightness.
  • Page 28 Video playback interface Overview Overview Delete Normal Video: Select it to view recorded videos Locked Video: Select it to check locked videos Lock the video View videos on fullscreen Photos: Select it to check photos Front/Rear Video Switch:Click it to switch to front/rear video Function interface After powering ON the camera, press the button to enter the setup process.(If the camera is...
  • Page 29 Resolution: 2160P/1440P/1080P The front camera supports 2160P/1440P/1080P, and rear camera supports 1080P. Movie clip time: 1min/2min/3min Select the recording duration for each video. Sound Record: ON/OFF In order to be able to record more comprehensive evidence, we recommend that you turn on this switch.
  • Page 30 Movie Clip Time: 1minutes/2minutes/3minutes Q: Why is every video recording so short? A: We set the recording interval of each video to 1min/2min/3min.This is for the convenience of finding the locked video later.The main function of the recorder is to record, especially to record emergency video.
  • Page 31 There are two parking monitor modes: "Collision Boot Recording" and "Lapse Recording". Please set the menu below to choose the mode you want. Parking mode: on/off Turn it on to achieve parking monitor. Collision Boot Recording : Off/ Low /Middle/High After Choosing the Sensitivity of Collision Boot Recording, the dash cam will automatically turn on and record 30 seconds locked video after a collision is detected.
  • Page 32 Principle When the hardwire kit is correctly connected and the Parking mode lapse Recording mode is turned on, the acc is out of power when the car is turned off (bat is always charged), and the dash cam detects that the acc is out of power and will stop normal recording and enter the "Lapse Recording mode".
  • Page 33 If you turn on the "Collision Boot Recording" without setting the "Lapse time" to off, the dash cam will enter Timelapse mode after parking. If you want to lock some videos during Timelapse mode,Please set the G-Sensor Sensitivity. Time always on on/off When this setting is turned off, the time is not displayed when in the recording interface.
  • Page 34 G-Sensor sensitivity Off/High/Middle/Low After turning on the G-Sensor, the dash cam will lock the video when it detects bumps while driving. NOTE: Recommended to adjust to medium/low Default booting display Choose the default camera image to display when powering on...
  • Page 35 Volume setting Set the volume of the dash cam Clock settings Set the time and date manually. Time format 12/24H time format Speed unit MPH/KMH Select the unit you need.
  • Page 36 Forced recording If you stay in other interface and forget to record video, it will force to start recording. Locked video loop The principle of the loop recording function is to only overwrite the unlocked normal video to record a new video. If you want to lock the video to be covered as well, please turn on this function.
  • Page 37 The camera will set the date and time based on the GMT value selection when it receives the GPS signal lock Automatically. You can set the daylight saving time by adjust the time-zone.
  • Page 38 Mirror flip of rear image: ON/OFF Upside down of rear image:ON/OFF If you are installing rear camera in a forward direction (fixing the bracket downwards), please turn on "Upside down of rear image" and turn off "Mirror flip of rear image"to adjust the view. Format SD card Clean all the data.
  • Page 39 Reset setup This is used to restore factory settings. Show reversing line ON/OFF Reversing line (Auxiliary function) If your car does not have a reversing system and you need a backup reversing system as an aid, you need to connect the red cable of the rear cam to the positive pole of your reversing lamp.
  • Page 40 You can adjust the viewing angle and the positions of the four corners of the reversing line in the "Reversing line" option of the settings The reversing line has three colors of red, yellow and green. When the object behind the car reaches the red distance, it means you can stop reversing.
  • Page 41: Video Playback On Pc

    Video Playback on PC If you need to track GPS information, please download the dedicated player, The G850 GPSPlayer download link as follows: https://wolfbox.com/gps-player/ Player interface Please install the GPS first. To track the Location, Speed, status, Signal Strength, please go to info on the Menu Setting.
  • Page 42: Troubleshooting

    NOTE: If you encounter problems during use, please CONTACT US. Trouble Shootings Please feel free to contact our customer support at service@wolfbox.com. Why the front lens image is tilted? Please rotate the front lens to adjust the front image. Why doesn't the rear camera work? Why can't the rear camerabe detected? 1.
  • Page 43 2. If still not work after reconnection, there may be a problem with the cable. Because when wiring in the car, it may cause the metal wire in the rubber to bend and cause a short circuit. Please CONTACT US and we will solve it for you. Why can't it automatically switch to the rear camera when reversing or why can't the reversing line appear? 1.
  • Page 44 ONE YEAR LIMITED WARRANTY We are committed to giving customers the best product experience and after-sale service. Our warranty period is one year. If the machine parts are damaged or there are any problems during use, we will solve them in time and provide you with a satisfactory shopping experience. Please CONTACT US with your online order, and we will provide free replacement and lifetime technical support.Besides, you can also get free accessories from us.
  • Page 48 Check us out here! We have professional customer service! E-mail: service@wolfbox.com Phone: +1 888 296 8399...

Table of Contents

Save PDF