Datalogger; Wintax; Sysma; Engine Map Update - PEUGEOT 208 Rally 4 2021 User Manual

14. DATALOGGER

14.1.

WINTAX

You can use two Wintax4 licenses on the 208 Rally4:
- An economical version 4.80.06.09 with which you can download the data only by Ethernet
cable.
- A full version 4.76.00.27 (idem C3R5 - 308 TCR) which also allows you to download the
acquisitions of the car via a standard USB Flash Drive.
Installation and user instructions are available on the FTP server
For any questions about Wintax, do not hesitate to contact Peugeot Sport technical support.
14.2.

SYSMA

Magneti Marelli's Sysma software (available on the FTP server in System), allows you to update
your ECU yourself, with no needs to physically send it back to us.
In addition, you will be able to modify the circumference of the wheel according to the tires fitted
to the car.
It is also possible to connect your computer to the car in order to view the channels in live.
The software is free and no license is required, the cable to connect the computer to the 208Rally4
is the same as than for Wintax.

14.2.1. Engine map update

Please find below the procedure to update to engine mapping. First, you'll need to connect your
computer to the car, put Main ON, with the Wintax IP address.
1- Open Sysma and load the project « PSA_R4_14.2.2.9_VSCC_XXXXXXX_Basic » available
on the FTP server.
2- Press Ctrl + F8 to access to the Connection status.
Version D User Guide 208 Rally 4 - 24/06/2020
Notice_Wintax
4.23_200528.pdf
Return to the content table P 65