Huawei ViewPoint 8650C MCU Quick Start Manual page 45

ViewPoint 8650C MCU
Quick Start
Icon
Issue 02 (2010-11-27)
Function Description
Single This is used to set the call mode of a participant to
dial-out Single dial-out. In this case, the MCU needs to call the
participant to add the participant to the conference.
Start This is used to enable the multicast function. The
Multicast multicast parameters are set in the corresponding
conference profile.
End This is used to disable the multicast function.
Multicast
Extend This is used to extend the duration of the selected
Conference conference.
End This is used to end the selected conference.
Conference
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Holding a Conference
4-7