Powering On The Mcu; Using The Web Interface For The First Time; Logging In To The Web Interface - Huawei ViewPoint 8650C MCU Quick Start Manual

3 First Use

3.2 Powering On the MCU

Procedure
1
Use the power cable to connect the AC power module of the 8650C to the power
socket on the wall.
2
Switch on the power switch of the 8650C.
Figure 3-1 Power Switch
----End
Result
After the 8650C is connected to the power supply, the indicators on the front panel of
boards of the 8650C start to fast blink. After the 8650C is powered on, the RUN
indicator becomes slow blinking.

3.3 Using the Web Interface for the First Time

3.3.1 Logging In to the Web Interface

Procedure
1
Launch the browser. In the address bar of the browser, enter the IP address of the GE0
network interface in the address bar. (By default, the IP address is 192.168.2.1.) Then,
press Enter to display the login page of the Web interface, as shown in
3-2 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ViewPoint 8650C MCU
Quick Start
Figure 3-2.
Issue 02 (2010-11-27)