Connecting Cables - Huawei ViewPoint 8650C MCU Quick Start Manual

2 Installation Guide
Figure 2-1 Fixing the 8650C
2
Then fix the 8650C with screws.
----End

2.2.2 Connecting Cables

Procedure
1
Plug the three-phrase AC connector at one end of the power cable to the power jack on
the rear panel of the 8650C.
2
Plug the other end of the power cable into the AC power socket.
3
Plug the RJ-45 connector at one end of the network cable to the GE0 port of the 8650C.
4
Plug the RJ-45 connector at the other end of the network cable to a hub or switch.
To use the network port backup function, you need to do the following:
Connect the GE1 network port to the network in the same way of connecting the GE0
port.
Set GE1 as the backup network interface of GE0.
5
You can connect the other ports on the front panel of the 8650C according to the actual
requirements.
----End
2-2 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ViewPoint 8650C MCU
Quick Start
Issue 02 (2010-11-27)