Toro Greensmaster e1021 Installation Instructions

Frame Kit
Greensmaster
Model No. 140-9341
Installation
Preparing the Machine
1. Park the machine on a level surface.
2. Engage the parking brake.
3. Shut off the machine and remove the key.
1. Frame
© 2021—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
® e1021 or eFlex
Removing the Existing
Frame and Installing the
New Frame
To remove the existing frame and install the new
frame, refer to the instructions in the traction
unit Service Manual for removing and installing
components that connect to the frame, including the
drum drive, transmission, and cutting unit, among
other components. Refer to
(page 2)
to install the handle to the frame.
Figure 1
e1021 frame and the surrounding components.
Figure 1
Register at www.Toro.com.
Form No. 3448-708 Rev A
® 1021 Greensmower
Installation Instructions
for instructions to use loose parts in this kit
shows an overview of the Greensmaster
Original Instructions (EN)
Printed in the USA
All Rights Reserved
Installing the Handle
g368055
*3448-708*