Advertisement
Buttons on Remote Control
Sleep button
Press this button to turn the sleep function on or off under cooling, dry, and heating mode.
Note:
●
By default, this function is default switched off when you power on your unit.
●
It will be cleared after changing the mode.
●
The sleep button can't be used in "Fan" mode and "Auto" mode.
Timer button
This button sets the timer. After pressing this button, "HOUR ON (HOUR OFF)" the
remote controller blinks. Press "
time. Each pressing of "
0.5 hour. Hold "
required time. Press " Timer " to confirm it. The word "HOUR ON (HOUR OFF) " will
stop blinking. "HOUR ON (HOUR OFF) " and "
displayed.
Cancel Timer on (off )
If you start the timer in error, press " Timer " button to cancel it.
Note:
●
Time set range:0.5-24 hours.
●
When the timer is on, the controller display on the unit will be on too.
Light button
This turns the light on or off on the unit's display.
I feel button
Press this button to start i feel function and "
controller. After this function is set, the remote controller will send the detected ambient
temperature to the indoor unit and the unit will automatically adjust the indoor
+
+
–
" or "
+
–
" or "
" button, the time will change quickly until reaching your
–
" or "
" button within 5s to set timer on (timer off)
" button, the time will increase or decrease
" will be displayed on the remote
" on remote controller will be
Advertisement
