Buttons on Remote Control
• The set temperature range on the remote controller is:
• The set fan speeds are: Auto. Fan1, Fan2, Fan3, Fan4, Fan5, Turbo.
Fan button
Press this button to set fan speed: auto(AUTO), fan1(
Fan3(
), fan4(
speed.
Note:
●
In AUTO speed, air conditioner will select fan speed automatically according to the
ambient room temperature.
●
The fan speed under dry mode is always fan1.
●
After entering the stepless speed mode, you can adjust the fan speed manually by
choosing "
●
to the button " +" or " - ".
button
Press this button to select the angle of the fan. See the image below:
Note:
●
To change the "ON display" into "
seconds. The angle directly turns into "ON display"; When reaching your required
angle, release the button.
), fan5(
" status, press this button for two
16~31°C
;
), turbo(
), fan2(
),
), stepless