ABB ACH580-01 Manual page 53

Hide thumbs Also See for ACH580-01:

Table of Contents

To change a value in an edit view:

• Use

and

to move the cursor left and

right.

• Use

and

to change the value.

Press

(Save) to accept the new setting, or

press

(Cancel) to go back to the previous

view without making changes.

This step is optional, and requires rotating the

motor. Do not do this if it could cause any risk, or if

the mechanical set-up does not allow it.

To do the direction test, select Spin the motor

and press

(Next).

Press the Hand key

Hand

drive.

Check the direction of the motor.

If it is forward, select Yes, motor is spinning

forward and press

If the direction is not forward, select No, fix

direction and press

Select the localization you want to use and press

(Next).

on the panel to start the

(Next) to continue.

EN – Quick start-up guide 53

R0-

R1-

Table of Contents

Acq580-01