Advertisement
NX-HD10
2.
Disconnect the wire from connector CN921 on the
AC jack board.
3.
Remove the four screws T
transformer assembly.
Removing the Relay board
Prior to performing the following procedure, remove
the top cover, the HDD board assembly, the rear
cover, the system control board and the main
amplifier board.
1.
Remove the two screws U on top of the body.
1-12
attaching the power
(See Fig.24)
Power transformer assembly
T
Fig.23
Relay board
U
Fig.24
AC jack board
CN921
T
U
Advertisement
