Page 1
PORTABLE MINIDISC RECORDER TRAGBARER MINIDISC-RECORDER ENREGISTREUR DE MINIDISC PORTABLE DRAAGBARE MINIDISC-RECORDER XM-R700 GEBRUIKSAANWIJZING INSTRUCTIONS BEDIENUNGSANLEITUNG MANUEL D’INSTRUCTIONS For Customer Use: Enter below the Model No. is located on the bottom of the cabinet and Serial No. is located inside of the cabinet. Retain this information for future reference.
Page 2
WICHTIGER HINWEIS FÜR LASER-PRODUKTE / IMPORTANT POUR LES PRODUITS LASER /BELANGRIJKE INFORMATIE VOOR LASERPRODUKTEN ACHTUNG! DIESES PRODUKT ERZEUGT LASERSTRAHLEN. DIE VERWENDUNG DER BEDIENUNGS- UND EINSTELL- ELEMENTE ZU ANDEREN ZWECKEN ALS DEN HIER BESCHRIEBENEN KANN ZUR FREISETZUNG GEFÄHRLICHER LASERSTRAHLUNG FÜHREN. ÖFFNEN SIE KEINE ABDECKUNG UND FÜHREN SIE KEINE REPARATUREN SELBST DURCH.
Page 3
CLASS LASER PRODUCT 1. LASER-PRODUKT DER KLASSE 1 2. GEFAHR: Unsichtbare Laserstrahlung bei Öffnung und fehlerhafter oder beschädigter Spre. Direkten Kontakt mit dem Strahl vermeiden! 3. ACHTUNG: Das Gehäuse nicht öffnen. Das Gerät enthält keinerlei Teile, die vom Benutzer gewartet werden können.
Thank you for purchasing this JVC product. Please read these instructions carefully before starting operation to be sure to obtain optimum performance and a longer service life from the unit. Table of Contents Supplied Accessories ... 1 Location of Controls ... 1 Power Supply Preparations ...
Power Supply Preparations As a power supply source, you can use the rechargeable battery and/or dry-cell batteries, or AC adaptor. For information on operating times of batteries, refer to the specifications (page 20). Using lithium–ion battery (rechargeable battery) (BN-R3610) Insert the rechargeable battery into the unit. Slide the cover and open it.
Note The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet. Battery indicator The battery indicator appears on the display of the unit and remote control. When the indication changes as follows, power will be shut off a short while after.
Page 7
Press the 6 button on the unit or remote control. Playback will start from the first track and ends after playing all the tracks of the MD. [Unit’s display] Disc mark turns. Peak Level Meter Playback mode and track title Number of tracks being played To eject the MD, slide the OPEN switch to open the lid and open it by hand.
Playback mode and track title display When an MD is played back, the playback mode and the title recorded on the track being played back appear at the lower part of the unit’s display. Also, on the remote control’s display, the track title appears once if it is recorded. Also, “LP2”...
Page 9
Adjusting Tone in MANUAL Sound Mode You can adjust the tone by changing the bass and treble. Press the A.C.BASS button on the remote control until “MANUAL” appears on the dis- play. indicator lights up on the remote control’s display. (If the step.) Press the A.C.BASS button for 2 seconds or more.
Showing the Disc Information Each time you press the DISPLAY / CHARA. (or DISPLAY) button in Stop mode or during playback, the disc in- formation is displayed as follows. The DISPLAY / CHARA. button on the unit and the DISPLAY button on the remote control work independently. Display change on the unit: In Stop mode: Disc title*, total track number, and total playback time...
Selecting the Operational Options of Remote Control Muting a pip tone When you press the buttons on the remote control, a pip tone is issued except for the A.C.BASS and VOLUME +, – buttons. To mute the pip tone, in Stop mode or during playback, press and hold the A.C.BASS button, and within one second, press the P.MODE button.
Check Items Before Starting Recording • The MD is not the Play-only type one. • The accidental erasure prevention knob of the MD cartridge is set to the close position. • The MD has enough space for recording. If not, carry out ALL ERASE or ERASE function mentioned later to erase all the tracks or desired tracks in the MD.
Title “LP:” ON/OFF To increase the space usable for a title, you can delete the recording mode name “LP:” that will be added immedi- ately before the title. In stop mode, press the SET button for two seconds or more. Each time you press the button, the display alternates as follows: TITLE LP: OFF Ô...
Editing the MD (Using the unit) In addition to its recording and play functions, the unit comes with editing functions. You can divide, join, move, or erase the recorded tracks in the MD as required. Also, you can give a disc title to the MD and track titles to the tracks in the MD.
Dividing Tracks (DIVIDE Function) Use the unit to carry out this function. In Stop mode, press the EDIT/ENTER button and turn the JOG dial until “DIVIDE?” is displayed. Press the SET button and then press the 6 button. Turn the JOG dial (or press the 4 or ¢ button) to select the track number to be divided. Press the SET button at the point where the track is to be divided.
Moving Tracks (MOVE Function) Use the unit to carry out this function. In Stop mode, press the EDIT/ENTER button and turn the JOG dial until “MOVE?” is displayed. Press the SET button. JOG dial • You can listen to the track by pressing the 6 button.
Giving Titles to MD (TITLE Function) Use the unit to carry out this function. • You can give a disc title to the MD and a track title to the tracks in the MD. Any title name can be given up to 61 characters using the provided character sets.
Example: When input the title “M1” 1) Select “M” (put the cursor to the letter M using the JOG dial). 2) Press the SET button. The letter M is now displayed in the title name area. 3) Press the DISPLAY / CHARA. button until the numbers are displayed. 4) Select “1”...
Carrying batteries: When putting dry cell or rechargeable battery in a pocket or bag, ensure that no other metal objects such as a neck- lace are placed together with them. Contact with metal may cause short-circuiting which, in turn, may cause a fire. Notice about the rechargeable battery.
ATRAC (Adaptive TRansform Acoustic Coding)/ ATRAC3 The MD provides 80 minute recording and playback time, much more than an audio CD, but in a diameter of only 64mm. This ability to store such a large amount of data is the result of ATRAC, an audio compression technique de- veloped for MD.
Minidisc Limitations The minidisc records information in an original format that differs from that of conventional cassette tapes or DATs. Since there are some limitations with this recording format, the following types of conditions may arise. These condi- tions are not malfunctions. Condition “DISC FULL”...
Troubleshooting Guide Before requesting service for this unit, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the directory of Authorized Service Centers (enclosed with this unit) to locate a convenient service center, or consult your dealer for instructions.