Page 1
COMPACT COMPONENT SYSTEM COMPACT DISC AUTOMATIC CHANGER XL-FZ 158 BK / XL-FZ 258 BK XL-FZ158BK XL-FZ158 COMPACT DISC AUTOMATIC CHANGER CALL MEMORY RANDOM PLAY MODE DISC POWER PHONES LEVEL PHONES PLAY & EXCHANGE SYSTEM XL-FZ258BK CONTINUE PROGRAM RAMDOM POWER OPEN/...
Page 2
Warnings, Cautions and Others CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage"...
The fifth part, “GENERAL INFORMATIONS”, describes the COMPU LINK remote control system which facilitates various operations be- tween JVC components, and explains how to take care of discs. This part also includes “Troubleshooting”, which tells you how to check the unit when a malfunction occurs, and the technical informations...
RECEIVED 1 BIT P E M D D CONVERTER Disc tray XL-FZ258BK: STANDBY/RECEIVED indicator: lights in standby mode and upon re- ception of the remote control signal XL-FZ158BK: STANDBY indicator AC IN INTRODUCTION 1/¡, 4/¢ SEARCH: skip, fast forward/backward buttons...
Remote control unit (for XL-FZ258BK) PROGRAM button CONTINUE button DISC buttons TRACK buttons REPEAT button 4/¢: skip/check buttons 1/¡: fast forward/backward buttons Display window Disc number indicators DISC TRACK TOTAL TIME CHANGE REPEAT I Page 3 CONTINUE PROGRAM RAMDOM POWER OPEN/ DISC CLOSE...
BEFORE USING FOR THE FIRST TIME Installing the unit Best location Select a location which is level, dry and neither too cold nor too hot (temperature range 5°C (41°F) to 35°C (95°F)). Also, avoid dusty locations or any location subject to vibration. If interference occurs If this unit is placed near a tuner or a radio receiver tuned to AM frequencies, interference may occur.
Supplying the power To connect the AC power cord of the main unit The AC power cord is supplied separately and must be connected to the unit. Plug the AC power cord into the AC POWER CORD inlet of this unit and connect to the wall outlet after all connections are complete.
Plug the supplied COMPU LINK cord into the COMPU LINK-3 SYNCHRO jack on the rear panel of XL-FZ258BK/XL-FZ158BK. Plug the other end into the COMPU LINK jack of the other component. If there are two COMPU LINK jacks, plug it into either of them.
BASIC OPERATIONS Basic functions for disc playback Turning on the power of this unit Press the POWER button to turn on this unit. The STANDBY indicator is turned off and the display is turned on. Main unit Remote control unit POWER Press again to turn off the power and activate the standby mode.
Locating a point to start playback Skipping to a desired disc Use the DISC SKIP button. Main unit Remote control unit DISC SKIP DISC SKIP Each time the DISC SKIP button is pressed, the selected disc number switches from 1 to 5, then back to 1. Skipping to a desired track Use the 4/¢...
BASIC OPERATIONS Changing discs during playback During playback of a disc, you can change other discs in the disc tray without stopping playback. Press the EXCHANGE button. The disc tray opens and you can change the discs inside. Main unit Remote control unit EXCHANGE EXCHANGE...
The specified disc/track is added to the end of the program being played back. ÷ For XL-FZ158BK, only the disc number can be specified and the entire disc is added to the program. For this operation, it is not possible to utilize the 4/¢ SEARCH buttons.
Playing tracks in a random order You can select and play tracks in random order from all the discs loaded in the unit. Selections are made so that each track is played only once. RANDOM XL-FZ258 COMPACT DISC AUTOMATIC CHANGER CALL RANDOM MEMORY...
The COMPU LINK Remote Control System controls relative operations between components automatically and facilitates various operations. This is a system originated and developed by JVC for facilitating various system operations. The following is a brief explanation of this system: Automatic source selection...
GENERAL INFORMATIONS Care and handling How to handle CDs When handling compact discs, do not touch the surface of the disc (re- flective silver side — the side without the label). Since compact discs are made of plastic, they are easily damaged. If the disc gets dirty, dusty, scratched or warped, the sound will not be picked up correctly and, in addition, such discs may cause the CD player to malfunction.
Troubleshooting What appears to be a malfunction may not always be serious. Please go through the following list before requesting service. Symptom The unit is not operative. Playback is not possible. No sound from the headphones. The reproduced sound includes noise. The sound is intermittent.
We would like to thank you for purchasing one of our JVC products. Before connecting this unit to the wall outlet, please read the instructions carefully to ensure that you obtain the best possible performance. If you have any questions, please consult your JVC dealer.
Page 18
Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and production of the wide array of JVC products, service is the key to maintaining the high level of performance for which JVC is world famous. The JVC service and engineering organization stands behind our products.
Page 19
WHAT WE WILL DO: If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner. Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers.
Page 20
VICTOR COMPANY OF JAPAN, LIMITED 0199AOMOKGJEM...