Sound Setting; Fm Reception Mode Setting; Cd And Md Playback Mode Setting - JVC CA-MXS6MDR Instructions Manual

Sound Setting

Selecting the sound modes
You can select one of the 6 preset sound modes (3 surround
modes and 3 SEA – Sound Effect Amplifier – modes) and 1
manual mode.
1
Press MENU.
The menu screen appears in the main display.
2
Push the joy control downward ( ) to select
"SOUND" (highlighted).
3
Push the joy control rightward ( ) or leftward ( )
to select a sound mode you want.
• The sound modes change as follows:
D.CLUB HALL
FLAT
(Canceled)
MANUAL
SET UP
• See pages 13 and 14 for details.
4
Press SET to finish the setting.
Reinforcing the Bass Sound
The richness and fullness of the bass sound is maintained
regardless of how low you set the volume — Active Bass
Extension.
1
Press MENU.
The menu screen appears in the main display.
2
Push the joy control downward ( ) to select
"A. BASS" (highlighted).
3
Push the joy control rightward ( ) or leftward ( )
to turn "ON" or "OFF" the Active Bass Extension.
• See page 12 for details.
4
Press SET to finish the setting.
STADIUM ROCK
POP
CLASSIC
– 62 –

FM Reception Mode Setting

When an FM stereo broadcast is hard to receive or noisy,
you can change the FM reception mode to "MONO" so that
reception improves.
1
Press MENU.
The menu screen appears in the main display.
• If the current source is not "FM," you cannot go to
the next step.
2
Push the joy control downward ( ) to select
"FM MODE (current play mode setting*)."
* The current play mode — AUTO or MONO will
appear following "FM MODE."
3
Push the joy control rightward ( ) or leftward ( )
to select the FM reception mode you want.
AUTO : Normally select this.
In this mode, you can hear stereo sound
when a program is broadcast in stereo. In
addition, static noise between stations
will be erased while tuning.
MONO : Select this when an FM stereo broadcast
is hard to receive or noisy. Reception
improves though stereo effect is lost.
4
Press SET to finish the setting.

CD and MD Playback Mode Setting

Selecting the playback modes
When the source is "CD" or "MD," and playback has not
been started, you can change its playback modes through
the menu.
1
Press MENU.
The menu screen appears in the main display.
• If the current source is not "CD" or "MD," or if CD
or MD play has been started, you cannot go to the
next step.
2
Push the joy control downward ( ) to select "CD
(current play mode setting*)" or "MD (current play
mode setting*)."
* The current play mode will appear following "CD" or
"MD."
Continued