All Erase Function - JVC CA-MXS6MDR Instructions Manual

5
Press SET.
" " appears between track number and track title.
" " means the track in the same line will be erased
when you finish the editing procedure.
Ex. When you want to erase track 3
• If you have selected a wrong track number, press
CANCEL, then select the correct track number.
6
Repeat step 4 and 5 to select all the tracks you want
to erase.
• You can select up to 15 tracks.
7
Press ENTER/DEMO to finish selecting tracks.
8
Press ENTER/DEMO again to finish the editing
procedure.
"EDITING" appears for a while, then "WRITING"
flashes while the editing you have made is being
recorded on the MD.

ALL ERASE Function

This function allows you to erase all the tracks on an MD.
• To stop any time during editing process, press TITLE/
EDIT.
1
Insert an MD you want to edit into the MD loading
slot.
• It takes about 5 seconds for the unit to read the TOC
(Table Of Contents) of the inserted MD. While the
unit is reading it, you cannot go to the next step.
2
Press TITLE/EDIT.
The source is changed to "MD."
3
Push the joy control downward ( ) to select "ALL
ERASE" (highlighted), then press SET.
4
Press ENTER/DEMO to finish the editing
procedure.
"EDITING" appears for a while, then "WRITING"
flashes while the editing you have made is being
recorded on the MD.
– 46 –