Hitachi GR4000 Series Installation Manual page 178

GR4000 Installation Guide Version 1.00 - Preliminary
Step 2
the slot, and fasten the screws of the power supply unit.
Figure 5.4-6
!
Step 3
(See the section 4.5.1, which gives you the instruction related to the
attachment/detachment of the GR4000-80E1 power cable.)
160
Insert the power supply unit into the slot deeply until it reaches the end of
Screws
Power supply unit fixed into its position
Caution: Use a driver when screwing up a power supply unit, and make sure that it is
fixed into its position firmly.
Attach the power cable to the power supply.
520-10-014-20X