Advertisement
VL-E630U/T
VL-E680U
VL-E685U/T
Preparation for 6-2-2-3~6-2-2-9; set up the camera signal adjustment mode. (Write 00 to the address 1FE.)
6-2-2-3.
Before starting these adjustments, set up the auto focus adjust.
• Sync level adjustment
Measuring instrument Oscilloscope
Subject
Tape
Test point
Adjustment address
Adjustment level
1) Connect the oscilloscope to the VIDEO-OUT. Adjust the
sync level to 286mVp-p.
6-2-2-9.
• Auto white balance adjustment
Measuring instrument
Subject
Tape
Test point
Adjustment address R-OUT DOOR 016
Adjustment level
1) Attach the color temperature conversion filter (JIGHOYA-LB165) to the front of the lens.
2) Using the addresses R-OUT DOOR 016 and B-OUT DOOR 018, adjust the spot to the center.
3) Take off the color temperature conversion filter.
Write FF to the address 1FE to the address 1FE to exit the camera adjustment mode.
Anything
—
VIDEO OUT (Terminated in 75Ω)
1FE
286mVp-p
Vector scope
Gray scale
—
VIDEO OUT (Terminated in 75 Ω)
B-OUT DOOR 018
R-OUT DOOR; 0 ± 3 %
B-OUT DOOR; 0 ± 3 %
1H
6
Video
SYNC
286mVp-p
R-Y
Spot
B-Y
Center point
Advertisement
