Table of Contents
Advertisement
en Troubleshooting
22.2 Fitting the retainers
The retainers may fall out when you detach the rails.
Note:
The retainers at the front differ from those at the rear.
1.
Hook the front retainers with the hook into the round
hole at the top and set them at a slight angle
2.
Hook the front retainers in at the bottom and
straighten them
.
23 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
23.1 Malfunctions
Fault
The appliance is not
working.
30
Cause and troubleshooting
The circuit breaker is faulty.
▶
Check the circuit breaker in the fuse box.
3.
Hook the rear retainers with the hook into the top
hole
and push them into the bottom hole
22.3 Attaching the rails
Notes
¡ When hanging the rails, ensure that the pull-out is at
the bottom.
.
¡ The rails only fit on the right or left.
¡ For both pull-out rails, ensure that you can pull them
forwards and out.
1.
Set the rear rail at an angle, hooking it into the re-
tainers at the top and bottom
2.
Pull the rail forwards
3.
Hook in the rail at the front
4.
Push the pull-outs in completely.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
Only use genuine spare parts when repairing the
appliance.
▶
If the power cord of this appliance is damaged, it
must be replaced by the manufacturer, the manufac-
turer's Customer Service or a similarly qualified per-
son in order to prevent any risk.
.
.
.
and press it down
.
Advertisement
Table of Contents
